Related Manuals for LOFTNESS 20
Summarization of Contents
Introduction
Owner Information and Manual Storage
Details for owners, including warranty policy, serial number location, and manual storage.
Machine Features and Options
Overview of the shredder's capabilities and available configurations.
Safety Instructions
General Safety and Responsibilities
Safety first, owner's responsibility, and shutdown procedures.
Operation and Maintenance Safety
Safety rules, operational safety, and maintenance precautions.
Hydraulic, Component, and Decal Safety
Safety for hydraulics, component identification, and decal locations.
Set-up Instructions
Equipment Assembly and Hardware
Steps for assembling the shredder and tightening hardware.
PTO and Deflector Setup
Installing PTO shield, PTO, and rear deflector.
PTO Attachment and Sizing
Proper methods for connecting and sizing the PTO shaft.
Operating Instructions
Getting Started and Attachment
Pre-start checks, tractor attachment, and basic operation settings.
Operation and Adjustments
Rotor balance, cutting height, turning, and general adjustments.
Configuration Procedures
Converting between transport and working modes.
Transporting the Shredder
Safety guidelines and procedures for transporting the machine.
Maintenance
General Maintenance and Schedule
Routine checks, lubrication, and maintenance schedule.
Lubrication, Gearbox, and Belt Systems
Grease points, gearbox oil, wheel spacing, and belt maintenance.
Rotor, Knife, and Gearbox Service
Rotor removal/assembly, knife replacement, and gearbox repair.
Storage and Troubleshooting
End-of-season storage and common problem solutions.
Parts Identification
Major Assemblies and Drives
Identification of wings, hitches, wheels, hydraulics, and drive systems.
Rotors, Knives, PTO, and Gearbox Parts
Parts for rotors, knives, PTO, clutches, and gearboxes.
Decals, Kits, and Accessories
Parts for lighting, decals, manual holder, jack stands, and options.
Options
Wide Windrow Kit
Information and parts for the wide windrow kit accessory.
Appendix
Specifications and Dimensions
Technical specifications and dimensional data for the shredder models.
Schematics and Torque Specifications
Hydraulic schematics and hardware torque specifications.
Need help?
Do you have a question about the 20 and is the answer not in the manual?
Questions and answers