DGSHAPE DWX-52DC User Manual

Table of Contents

Download this manual

Supported models: DWX-52D / DWX-52DC / DWX-52DCi

Thank you very much for purchasing this product.

• To ensure safe use with a full understanding of this machine's performance, please be sure to read through this manual com-

pletely.

• Reproduction, citation, or translation, in whole or in part, of this manual is prohibited without the express written consent of

DGSHAPE Corporation.

• The contents of this operation manual and the specifications of this product are subject to change without notice.

• DGSHAPE Corporation assumes no responsibility for any damage that may occur through use of this product, regardless of any

failure to perform on the part of this product or of any errors in this document. Damage includes but is not limited to damage

caused by the specifications or performance of the product, damage caused by non-use of the product, and damage caused by

deliverables obtained through use of this product. Such damage can be either direct or indirect.

FA03098

R2-220425

User's Manual

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.dgshape.com/

Table of Contents

Need help?

Do you have a question about the DWX-52DC and is the answer not in the manual?

Verify all components provided in the kit are present.

List of supplementary materials and equipment required for the process.

Instructions for setting up the pressure pot and stands for polymerization.

Step-by-step instructions for creating a denture base using room-temperature resin.

Step-by-step instructions for creating a complete denture using room-temperature resin.

Step-by-step instructions for creating a denture base using heated resin.

Step-by-step instructions for creating a complete denture using heated resin.