TPS MC Series Quick Start Manual

Congratulations !
With your new TPS Automatic Conductivity Sensor Replatiniser, you
now have the ability to fully maintain your TPS Conductivity sensors.
Please follow these instructions carefully to ensure that your sensors
are replatinised correctly.
NOTE
Replatinising
dangerous, highly acidic solution. Take care when handling this
solution and avoid contact with skin, eyes or any other part of the
body. Correct safety equipment as would be used for any other
strong acids should be worn.
An MSDS for Chloroplatinic Acid from the Buffers and Standards
section of the TPS Web Site :
http://www.tps.com.au/products/standards
Solution is Chloroplatinic Acid, which is a
TPS Automatic
Replatiniser
Version : 1.1
Date : 11/10/2004
Author : MS