Related Manuals for Bigfoot 12k
Summarization of Contents
Mounting Instructions
Plumbing of Hydraulic Lines
Details connecting hydraulic lines for single and slave leg systems.
Recommended Hydraulic Line Bleeding Process
Step-by-step guide to bleed air from hydraulic lines for proper function.
Final Electrical Steps
Hooking up the Breaker
Instructions for connecting the breaker for the hydraulic jack system.
Wireless Control Instructions
Wireless Control Operation
How to use the wireless transmitter to extend or retract the hydraulic jacks.
Sync Transmitter
Procedure to pair a new transmitter with the receiver unit.
Re-Program Receiver
Steps to clear and re-learn wireless transmitter codes for the receiver.
Manual Retract & Toggle Switch Wiring
Manual Retract Operation
Instructions for using the manual override hex key to retract or extend the cylinder.
Troubleshooting Guideline
Jack Runs Briefly Then Stops
Addresses issues where the jack operates for a short period before stopping.
Jack Operates in One Direction Only
Diagnoses problems causing the jack to function in only one directional movement.
No Jack Response to Switch
Troubleshoots issues when the jack does not respond to switch activation.
Jerky Retraction
Identifies causes for jerky movements during the jack retraction process.
Cylinder Creep or Pressure Loss
Addresses cylinders that slowly move down or fail to hold pressure.
Hydraulic Fluid Leaks
Guides on identifying and resolving leaks in hydraulic lines or fittings.
Plastic Foaming of Fluid
Troubleshoots issues related to fluid foaming or reservoir overflow.
Semi-Annual Service Required
Bleeding the System
Procedure for regular hydraulic system bleeding to ensure optimal performance.
Need help?
Do you have a question about the 12k and is the answer not in the manual?
Questions and answers