Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for PENTA 1130
Summarization of Contents
Introduction and Reference Information
Customer Reference Information
Fields for recording mixer model, serial number, date, and dealer details.
Identification Plate
Information on the serial number and its importance for service.
Warranty Information
Warranty Registration and Inspection Report
Form for dealer and customer at delivery to register warranty.
Specifications and Intended Use
Description
Overview of mixer components, chassis, and power supply.
Intended Use
Explains the mixer's capabilities in ration formulation and feed mixing.
Safety Instructions and Precautions
Safety Terminology
Explanation of terms like DANGER, WARNING, CAUTION, IMPORTANT, and NOTE.
General Precautions
Lists essential steps before servicing, operating, or leaving the machine.
Safety When Servicing
Operator Responsibility
Emphasizes the operator's role in safe operation and understanding the manual.
Servicing Precautions
Steps to take before servicing, including safety gear and tool usage.
Operating Safety Guidelines
Pre-Operation Checks
Checks to perform before using the equipment.
Safe Operation Practices
Rules for safe operation, including guarding, bystanders, and PTO safety.
Safety Decals and Warnings
DANGER Decals
Illustrations and explanations of critical danger warnings.
WARNING Decals
Illustrations and explanations of important warnings.
Transport Procedures and Safety
General Transport Rules
Instructions for cleaning lights, using SMV emblems, and securing the mixer.
Transport Safety Warnings
DANGER, CAUTION, and WARNING notes related to transport conditions.
Tire Safety and Maintenance
Tire Mounting Safety
Warnings about tire mounting procedures and qualifications.
Tire Pressure and Service Life
Effects of over/underinflation on tire wear and performance.
Pre-Operation Checklist
Manual and Safety Review
Ensuring understanding of manual and safety precautions.
Machine Inspection Points
Specific checks for tires, hoses, connections, guards, and PTO.
Tractor Requirements and Equipment Matching
Mixer Series Horsepower
Table detailing horsepower requirements for different PENTA mixer series.
Equipment Matching Considerations
Advice on choosing a suitable tractor for terrain and load conditions.
Connection Procedures
Coupling to Tow Vehicle
Instructions for hitching the mixer to the tractor, including safety warnings.
Hydraulic Connections
Guidelines for connecting and maintaining hydraulic lines and systems.
PTO Shaft Connection and Adjustment
PTO Shaft Length and Overlap
Ensuring correct PTO shaft length for proper overlap and avoiding damage.
Shear Pin and PTO Compatibility
Importance of using the correct PTO shaft and shear pin to maintain warranty.
Operation - Weighing System
Scale Indicator Mounting and Connection
Instructions for attaching and connecting the DIGI-STAR scale indicator.
Power Supply and Scale Programming
Connecting the 12V DC power supply and scale unit programming.
Operation - Scale Accuracy and Break-in
Scale System Calibration and Troubleshooting
Methods for checking scale accuracy, loadcells, and resolving common issues.
Machine Break-In Procedure
Important checks after the initial hours of use, including fasteners and lubrication.
Operation - Loading and Mixing
Loading Sequence and Material Handling
Recommended order for adding materials and tips for cutting speed.
Mixing Speeds and Leveling
Optimal auger speeds for mixing and emptying, and importance of level operation.
Operation - Unloading and Conveyor Systems
Conveyor Operation and Adjustment
Greasing, chain tension adjustment, and flow control for conveyor operation.
Discharge System Types
Explanation of Dual Discharge and Right/Left Flip Up Discharge systems.
Maintenance Checks
Pre-Operation Maintenance
Checks for gearbox oil, PTO driveline, and debris before starting.
Post-Operation Checks
Checks for fasteners, auger, hoses, and oil leaks after use.
Maintenance Schedule
Lubrication Schedule
Frequency for greasing PTO shafts, bearings, and gearbox oil checks.
Component Maintenance Intervals
Schedule for wheel nuts, tire pressure, and shear bolt replacement.
General Maintenance and Storage Safety
Maintenance Safety Procedures
Safety steps before servicing, relieving pressure, and using proper tools.
Storage Safety Guidelines
Instructions for storing the mixer in a safe, dry, and level area.
Planetary Gearbox Lubrication
Gearbox Oil Reservoir and Levels
Checking max/min oil levels and lubricant type (80-140 Full Synthetic GL5).
Breather Cap Maintenance
Cleaning and checking the breather cap for proper air flow.
Filling the Planetary Gearbox
Gearbox Oil Refill Procedure
Using the bottom fitting to fill the gearbox and checking for proper level.
Checking Gearbox Oil Level
Methods to verify the gearbox is full, including tower plug and air line checks.
Grease Locations and PTO Shaft
Planetary and Conveyor Greasing
Grease nipple locations and recommended greasing frequency.
PTO Drive Shaft Safety
Ensuring proper guards, length, and using correct shear bolts for the PTO shaft.
Wheel Bearings and Brake Maintenance
Wheel Bearing Lubrication
Frequency and type of grease for wheel bearings, including cleaning procedure.
Brake System Checks
Initial checks for actuators, springs, and brake operation.
Bolt Torque Specifications
Imperial Bolt Torque Values
Torque specifications for various imperial bolt diameters (SAE 2, 5, 8).
Metric Bolt Torque Values
Torque specifications for various metric bolt diameters (8.8, 10.9).
Decals and Part Numbers
Safety Decal Management
Importance of clean, legible decals and how to obtain replacements.
Decal Part Number List
List of component descriptions and associated part numbers for decals.
Need help?
Do you have a question about the 1130 and is the answer not in the manual?
Questions and answers