Related Manuals for The Galley IWS 5S
Summary of Contents for The Galley IWS 5S
- Page 1 Installation Guide Ideal Workstations , Work&WashStations ™, ® Workstations/WashStations with DryDock ™ ™ BarStations and WashStations ™ ®...
- Page 3 Center Tap hole diameters 2” behind cutout Call 800.375.4255 or email customerservice@thegalley.com Note: Galley Hot & Cold Tap requires a minimum 8" clearance to center if installed to the right of the Galley Tap for additional guidance on Tap and Tap Accessory placements...
- Page 4 Center Tap hole diameters 2” behind cutout Call 800.375.4255 or email customerservice@thegalley.com Note: Galley Hot & Cold Tap requires a minimum 8" clearance to center if installed to the right of the Galley Tap for additional guidance on Tap and Tap Accessory placements...
- Page 5 Center Tap hole diameters 2” behind cutout Call 800.375.4255 or email customerservice@thegalley.com Note: Galley Hot & Cold Tap requires a minimum 8" clearance to center if installed to the right of the Galley Tap for additional guidance on Tap and Tap Accessory placements...
- Page 6 Center Tap hole diameters 2” behind cutout Call 800.375.4255 or email customerservice@thegalley.com Note: Galley Hot & Cold Tap requires a minimum 8" clearance to center if installed to the right of the Galley Tap for additional guidance on Tap and Tap Accessory placements...
-
Page 7: Spray Bottle
1/16" from the top of the cabinet(s). 2. Leave the installation instructions tray a xed to The Galley Basin until the countertop has been templated, and leave the basin braces a xed to the Basin’s tiers until the countertop has been installed and silicone has cured for a minimum of one hour. - Page 8 OVERHEAD VIEW 3. INSTALL THE WORKSTATION BASIN a) Carefully place The Galley Basin into the cabinet by resting the flanges on the support frame. All four flanges should rest on the support frame. b) Use a level to ensure that the flanges are level. The top of the flanges should be flush with the top of the...
-
Page 9: Countertop Installation
FOR THE COUNTERTOP FABRICATOR Countertop Installation Use the white template tray a xed to The Galley Basin flanges as STEP 2 your guide for the front to back, and left to right cutout. Refer to Apply a heavy bead of silicone to the untaped part of the flange. - Page 10 The Galley Workstation ® Limited Lifetime Warranty 1. GALLEY WORKSTATION LIMITED LIFETIME WARRANTY - Seller provides a Limited Lifetime Warranty. Seller warrants its stainless steel sink, installed in a residential application, to be free from manufacturing defects in materials and workmanship under normal residential usage.
- Page 12 Corporate Headquarters The Galley, LLC 12626 South Memorial Drive Bixby, OK 74008 800.375.4255 thegalley.com...
Need help?
Do you have a question about the IWS 5S and is the answer not in the manual?
Questions and answers