Table of Contents

Advertisement

Quick Links

Thank you for purchasing this Panasonic product.
■ The Operating Instructions correspond to the firmware's main version 2.00 and higher.
■ This manual is common to all the models regardless of suffixes of the Model No.
z for Taiwan
BA: Black model, the standard zoom lens supplied
z for India
BD: Black model, the standard zoom lens supplied
z for Korea
B: Black model, the standard zoom lens supplied
z for Asia (except for Taiwan, India, Korea) / Oceania / Africa
BA/B: Black model, the standard zoom lens supplied
WA/W: White model, the standard zoom lens supplied
z for other countries or regions
B: Black model, the standard zoom lens supplied
W: White model, the standard zoom lens supplied
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using this product, be sure to read "Read this first!" ( x pages 5 to 16).
Operating Instructions
DLP™ Projector
Model No.
Functional Manual
Commercial Use
PT-RZ120
LBD: Black model, the lens sold separately
W: White model, the standard zoom lens supplied
LBA/LB: Black model, the lens sold separately
LWA/LW: White model, the lens sold separately
LB: Black model, the lens sold separately
LW: White model, the lens sold separately
ENGLISH
DPQP1239ZE/X1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT-RZ120BU7 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Precautions for Use
Intended Use and Transport Cautions
Defines the projector's intended purpose and provides guidelines for safe transportation.
Installation Environment Cautions
Advises on suitable installation locations and environmental conditions to avoid.
Installation and Setup Guidelines
Installation and Setup Guidelines
Provides advice on professional installation, radio wave interference, and environmental limits.
Focus Adjustment and Thermal Effects
Details focus adjustment after warm-up and considerations for thermal effects.
Projector Setup and Installation Modes
Usable Power Outlets
Specifies the required power outlet specifications for safe operation.
Installation Orientation Modes
Explains different mounting orientations like Front, Rear, Floor, and Ceiling.
Projector Features Overview
Key Features
Highlights main features like high luminance, contrast, easy setup, and reliability.
Quick Setup Steps
Provides a concise step-by-step guide for initial projector setup.
Connecting Devices and Terminal Information
Pre-Connection Guidelines
Essential steps and precautions before connecting external devices.
RGB and HDMI Terminal Pinouts
Detailed pin assignments for RGB and HDMI input terminals.
Projector Power On/Off and Power Cord Connection
Connecting and Attaching the Power Cord
Instructions for securely connecting the power cord to the projector.
Power Cord Removal and Power Indicator Status
Power Cord Removal
Step-by-step guide for safely removing the power cord.
Power Indicator Status Explanation
Describes the meaning of different power indicator states.
Projector Power Status and Switching On
Power Indicator Status Details
Detailed explanation of power indicator colors and blinking patterns.
Projector Power On Procedure
Step-by-step instructions for turning the projector on.
Initial Projector Settings and Focus Adjustment
Initial Setup Screens and Procedures
Guides through initial setup screens like language and focus adjustment.
Focus Adjustment Process
Instructions for adjusting focus to ensure image clarity.
Initial Operation and Brightness Settings
Operation Mode Settings
Configures operating mode (Normal, ECO, Quiet, User) for performance optimization.
Maximum Light Output and Light Output Adjustment
Adjusts maximum brightness level and general light output.
Luminance and Runtime Interrelation
Luminance and Runtime Guidelines
Explains the relationship between brightness settings and projector lifespan.
Light Output Adjustment Details
Details on adjusting light output for desired brightness and runtime.
Initial Installation and Standby Mode Settings
Installation Setting Configuration
Sets projector mounting orientation (Front/Rear, Floor/Ceiling).
Standby Mode Configuration
Sets power consumption mode during standby (Normal or ECO).
Initial Time Zone and Date/Time Settings
Startup Input Selection
Selects the input source used when the projector starts up.
Date and Time Configuration
Sets the projector's internal clock, including time zone and automatic synchronization.
Making Projector Adjustments and Selections
Image Adjustment Steps
Step-by-step guide for basic image adjustments like focus, input selection, and tilt.
Projecting Images and Input Signal Selection
Selecting the Input Signal
Guides on how to select the desired input signal for projection.
Focus, Zoom, and Lens Shift Adjustment
Lens Adjustment Procedures
Instructions for using control panel and remote for lens adjustments.
Lens Adjustment Safety and Notes
Safety warnings and important notes regarding lens adjustments.
Lens Type Setting and Home Position
Setting the Projection Lens Type
Configures the projector to match the installed projection lens type.
Moving Projection Lens to Home Position
Returns the projection lens to its default home position.
Lens Shift Adjustment and Range
Returning Lens to Home Position
Resets the lens to its home position using the adjustment screen.
Understanding Lens Shift Ranges
Illustrates the adjustable range for lens shift based on lens type.
Remote Control Operations: Shutter and OSD
Using the Shutter Function
Temporarily turns the projected image off without powering down.
Using the On-Screen Display Function
Hides or displays the on-screen menu and information.
Remote Control Operations: Auto Setup, Function Button, and Test Patterns
Automatic Setup Function Usage
Automatically adjusts image position, resolution, and clock phase.
Displaying Internal Test Patterns
Accesses built-in test patterns for projector condition checks.
Remote Control Operations: Status and ID Setting
Using the Status Function
Displays detailed projector status information like runtime and temperatures.
Setting Remote Control ID Number
Assigns an ID to the remote control for multi-projector operation.
Navigating the On-Screen Menu
Menu Navigation Procedure
Step-by-step guide on how to navigate through the projector's menu system.
Menu Navigation and Factory Reset
Navigating Sub-Menus and Adjusting Settings
Explains how to select sub-menus and adjust settings using navigation buttons.
Resetting Settings to Factory Defaults
Describes how to restore menu item settings to their factory default values.
Menu Structure and Settings Details
Main Menu Item Overview
Lists the main menu items and their corresponding pages.
Picture Menu Settings
Details settings within the Picture menu, including Picture Mode and Contrast.
Menu Structure and Settings Details (Continued)
Display Language and Option Settings
Covers display language and various display option settings.
Projector Setup Menu Options
Details settings available within the Projector Setup menu.
Menu Structure and Settings Details (Advanced)
Test Pattern, Signal List, and Security Settings
Information on test patterns, signal lists, and security configurations.
Network Menu Settings
Covers network configuration, status, and Art-Net setup options.
Picture Menu: Mode, Contrast, and Brightness
Picture Mode Selection
Allows selection of picture modes for different content types and environments.
Contrast and Brightness Adjustment
Adjusts image contrast and brightness levels for optimal viewing.
Picture Menu: Color, Tint, and Color Temperature
Color Saturation and Tint Adjustment
Adjusts color saturation and skin tone tint for the projected image.
Color Temperature Adjustment
Allows adjustment of color temperature for bluish or reddish white areas.
Picture Menu: White Balance Adjustment
Adjusting White Balance Levels
Detailed steps for adjusting white balance for USER1 and USER2 modes.
Customizing White Balance Settings
Adjusts white balance based on existing color temperature settings.
Picture Menu: White Gain and Gamma Settings
White Gain Adjustment
Adjusts the brightness of the white part of the image.
Gamma Setting Options
Allows switching gamma modes for image quality tuning.
Picture Menu: System Daylight View and Sharpness
System Daylight View Adjustment
Corrects image vividness for projection in bright light environments.
Sharpness Adjustment
Adjusts the sharpness of the projected image.
Picture Menu: Noise Reduction and Dynamic Contrast
Noise Reduction Settings
Reduces noise in degraded or noisy image signals.
Dynamic Contrast Adjustment
Optimizes contrast by automatically adjusting light source and signal compensation.
Picture Menu: Advanced Brightness and System Settings
Advanced Brightness Control Settings
Configures brightness signal level, lights-out timer, and manual intensity.
System Selector and Multi-Projector Sync
Selects input system and configures multi-projector synchronization.
Picture Menu: Default Mode and sRGB Compliance
Default Picture Mode Configuration
Sets the picture mode applied when a new signal is input.
sRGB Compliant Video Settings
Steps to achieve more faithful, sRGB compliant color reproduction.
Position Menu: Shift and Aspect Ratio
Image Shift Adjustment
Adjusts image position vertically or horizontally.
Aspect Ratio Settings
Switches the aspect ratio of the image based on screen settings.
Position Menu: Aspect Ratio and Zoom
Aspect Ratio Modes Explanation
Explains different aspect ratio modes like Auto, Through, and Fit.
Image Zoom Adjustment
Adjusts the image size using zoom settings.
Position Menu: Clock Phase and Geometry
Clock Phase Adjustment for Image Stability
Corrects flickering images or smeared outlines by adjusting clock phase.
Geometric Distortion Correction
Corrects various types of distortion in the projected image.
Geometry Correction Settings: Corner and Linearity
Corner Correction Procedure
Steps for correcting distortion in the four corners of the projected image.
Geometry Correction: Free Grid and Linearity Adjustments
Adjusting Distortion with Free Grid
Fine-tunes distortion by selecting points or lines for correction.
Adjusting Desired Linearity
Adjusts linearity for corner correction, allowing manual or auto methods.
Free Grid Settings and Control Point Configuration
Free Grid Configuration Options
Sets grid resolution, width, color, and control point color.
Control Point and Grid Color Settings
Configures the appearance and selection of control points for grid adjustments.
Geometry Correction: Initialization and Free Grid Reset
Initializing Free Grid Adjustments
Resets all FREE GRID correction data to factory default settings.
Advanced Menu: Digital Cinema Reality and Blanking
Digital Cinema Reality Feature
Enhances picture quality for interlaced video signals.
Blanking Adjustment
Adjusts blanking width to remove noise at image edges.
Advanced Menu: Input Resolution and Edge Blending
Input Resolution Optimization
Optimizes image clarity for flickering or smeared signals.
Edge Blending Functionality
Overlaps multiple images seamlessly for multi-display setups.
Edge Blending Fine-Tuning and Brightness Adjustments
Edge Blending Fine-Tuning
Adjusts start position and width for precise edge blending.
Brightness Adjustments for Edge Blending
Adjusts brightness in overlapping areas for seamless multi-display.
Advanced Menu: Frame Response and Display Settings
Frame Response Settings
Reduces image frame delay by simplifying image processing.
Display Settings Adjustments
Adjusts black border width and keystone area for display.
Display Option Menu: Color Matching
Adjusting Color Matching
Corrects color differences between projectors for multi-display setups.
Color Matching Using Colorimeter
Uses a colorimeter for precise chromaticity and luminance adjustments.
Display Option Menu: Color Correction and Screen Settings
Color Correction Options
Adjusts and registers colors for each input signal format.
Screen Setting Configuration
Sets screen size and corrects image position for optimal display.
Display Option Menu: Auto Signal and Setup
Auto Signal Detection
Automatically detects and adjusts signals for unregistered inputs.
Automatic Setup Function
Automatically adjusts image position and signal level for special signals.
Display Option Menu: Auto Adjustments and Backup Input
Automatic Position and Signal Level Adjustments
Automates position and signal level adjustments for optimal image display.
Backup Input Setting Configuration
Sets up a backup function to switch input signals seamlessly.
Display Option Menu: RGB Input Settings
RGB Input Slice Level and EDID Mode
Sets slice level and EDID mode for RGB input signals.
Display Option Menu: HDMI Input Settings
HDMI Signal Level and EDID Selection
Sets signal level and EDID for HDMI input signals.
HDMI EDID Mode Configuration
Configures EDID mode for HDMI input signals.
Display Option Menu: Digital LINK Input Settings
Digital LINK Signal Level
Sets the signal level for DIGITAL LINK input.
Digital LINK EDID Selection
Selects EDID for DIGITAL LINK input.
Display Option Menu: SDI Input Settings
SDI Input Resolution and Mapping
Sets resolution and 3G-SDI mapping for SDI input.
System Selector for SDI Input
Selects the system method for SDI input signals.
Display Option Menu: SDI Bit Depth and OSD Settings
SDI Input Bit Depth Settings
Configures the bit depth for SDI input signals.
On-Screen Display Position
Sets the position of the on-screen menu (OSD).
Display Option Menu: OSD Orientation, Warning Messages, and Menu Mode
OSD Orientation and Warning Messages
Configures OSD rotation and the display of warning messages.
Menu Mode and Image Rotation
Sets the menu display mode and rotates the projected image.
Display Option Menu: Image Rotation and Back Color
Image Rotation Settings
Rotates the input image by 90 degrees clockwise or counterclockwise.
Back Color Configuration
Sets the projected screen color when no signal is input.
Display Option Menu: Startup Logo and Uniformity Correction
Startup Logo Settings
Sets the logo displayed when the power is turned on.
Uniformity Correction
Corrects brightness and color unevenness of the entire screen.
Display Option Menu: Uniformity PC Correction and Shutter Settings
PC Correction for Uniformity
Uses a computer for brightness and color unevenness correction.
Shutter Function Settings
Sets the operation of the shutter function, including fade-in/fade-out.
Display Option Menu: Shutter Synchronization and Freeze Function
Shutter Synchronization Function
Synchronizes shutter operations across multiple projectors.
Freeze Functionality
Temporarily pauses the projected image regardless of external device playback.
Display Option Menu: Waveform Monitor Function
Waveform Monitor Usage
Displays video output luminance signal levels for adjustment.
Display Option Menu: Waveform Adjustment and Cut Off
Waveform Adjustment Procedures
Adjusts luminance, red, green, and blue levels using waveform monitor.
Color Component Cut Off Function
Removes red, green, and blue color components individually.
Projector Setup Menu: Projector ID and Projection Method
Projector ID Configuration
Assigns an ID number for simultaneous or individual remote control.
Projection Method Settings
Configures projection method (Front/Rear, Floor/Ceiling, Auto).
Projector Setup Menu: Lens Settings
Lens Type and Home Position Settings
Sets projection lens type and moves the lens to its home position.
Lens Calibration Procedure
Detects lens shift limits and performs calibration.
Projector Setup Menu: Operation Settings
Operation Mode Configuration
Sets the operating mode (Normal, ECO, Quiet, User) for optimal performance.
Projector Setup Menu: Brightness and Light Output Settings
Maximum Light Output Level Adjustment
Adjusts maximum screen brightness based on light source changes.
Light Output Adjustment
Adjusts the brightness of the light source.
Projector Setup Menu: Luminance-Runtime Interrelation
Luminance and Runtime Guidelines
Explains how settings affect brightness and lifespan, with estimation tables.
Light Output Adjustment Details
Details individual light output adjustment per operating mode.
Projector Setup Menu: Brightness Control Setup
Brightness Control Setup Options
Configures automatic brightness control using sensor and projector linking.
Projector Setup Menu: Brightness Control Status and Calibration
Brightness Control Status Display
Displays the current status of the brightness control function.
Brightness Control Calibration
Performs calibration for brightness control, especially after component replacement.
Brightness Control Error Handling and Adjustment Example
Error Message Interpretation
Explains error messages and corresponding measures.
Brightness Control Adjustment Example
Provides an example procedure for adjusting brightness across multiple projectors.
Projector Setup Menu: Standby and Quick Startup Modes
Standby Mode Settings
Configures power consumption mode during standby (Normal or ECO).
Quick Startup Function Configuration
Enables or disables the quick startup function for faster projection.
Projector Setup Menu: Signal Handling and Startup Options
No Signal Shut-off and Lights-Out
Configures automatic power-off or light source turn-off when no signal is detected.
Initial Startup and Input Selection
Sets startup method and initial input source.
Projector Setup Menu: Startup Input and Date/Time Settings
Startup Input Selection
Selects the input source that the projector starts with.
Date and Time Configuration
Sets the projector's internal clock and time zone.
Projector Setup Menu: Scheduling and Program Assignment
Schedule Function Enable/Disable
Enables or disables the command execution schedule.
Assigning Programs to Schedule
Assigns commands to specific days and times in the schedule.
Projector Setup Menu: Command Scheduling Details
Command Scheduling Configuration
Details how to set commands, parameters, and transmission methods.
Projector Setup Menu: Multi-Projector Synchronization
Contrast Synchronization Function
Synchronizes brightness levels for balanced contrast across multiple projectors.
Shutter Synchronization Function
Synchronizes shutter operations (fade-in/out) across linked projectors.
Projector Setup Menu: Synchronization and RS-232C Settings
Shutter Synchronization Details
Conditions and settings for shutter synchronization function.
RS-232C Communication Settings
Configures communication parameters for RS-232C connection.
Projector Setup Menu: RS-232C Response and Control
RS-232C Response Settings
Sets projector response for group or all ID commands via RS-232C.
Projector Setup Menu: Remote Control and Function Button Settings
Remote Control Mode Configuration
Sets the mode for the REMOTE 2 IN terminal.
Function Button Assignment
Assigns functions to the FUNCTION button for quick access.
Projector Setup Menu: Status Information Display
Projector Status Details
Displays detailed status information like firmware version, runtime, and temperatures.
Projector Setup Menu: Signal Information and Data Cloning
Signal Information Display
Shows details about the input signal, including terminal, format, and resolution.
Data Cloning Functionality
Copies projector settings to multiple projectors via LAN.
Projector Setup Menu: Data Cloning Security and Write Protection
Data Cloning Security Settings
Sets a security password for data cloning operations.
Write Protect Configuration
Permits or denies data cloning operations from other projectors.
Projector Setup Menu: User Data Management and Initialization
Saving and Loading User Data
Saves and loads projector settings as a backup.
Initializing Projector Settings
Resets various settings to their factory default values.
Projector Setup Menu: Initialization and Service Password
Initialization Settings Notes
Notes on settings not reset by initialization and the service password.
Test Pattern Menu Operations
Displaying Test Patterns
Displays built-in test patterns for checking projector condition.
Changing Cross Hatch Test Pattern Color
Allows changing the color of the cross hatch test pattern.
Signal List Menu: Managing Registered Signals
Registering and Renaming Signals
Procedures for registering new signals and renaming existing ones.
Deleting Registered Signals
Steps to delete registered signals from the list.
Signal List Menu: Protecting and Expanding Lock-in Range
Protecting Registered Signals
Protects registered signals from deletion, adjustment, or auto-setup.
Expanding Signal Lock-in Range
Widens the lock-in range for signal determination.
Signal List Menu: Sub Memory Management
Sub Memory Registration and Switching
Registers and switches between multiple image adjustment data sets.
Deleting Sub Memory Entries
Removes registered sub memory data.
Security Menu: Password and Display Settings
Security Password Setup
Enables or disables the security password entry for projector access.
Display Setting Configuration
Overlays security messages (text or image) on the projected image.
Security Menu: Text Change and Control Device Setup
Text Change for Security Messages
Edits the text displayed for the security message.
Control Device Setup (Button Access)
Enables or disables button operations on the control panel and remote.
Network connection
Connecting to the Network
Details on connecting the projector to a network via LAN cable.
Web control function
Computer Requirements for Web Control
Specifies compatible operating systems and web browsers.
Accessing the Projector via Web Browser
Guides on starting the browser, entering IP address, and login credentials.
Projector status page
Projector Status Details
Displays detailed projector status including firmware, power, and runtime.
Basic control page
Basic Control Functions
Controls power, shutter, OSD, and system method via web interface.
Detail control page
Control of the Projector via Web Interface
Controls projector functions like memory, daylight view, freeze, and input select.
Lens page
Lens Position Setting and Home Position
Sets and moves the projection lens position.
E-mail set up page
Email Setup Configuration
Configures email addresses, server details, and warning conditions.
Authentication set up page
Authentication Method Setup
Sets POP or SMTP authentication details for sending emails.
Light source/temperature indicators
Indicator Status Explanation
Details the status and solutions for light source and temperature indicators.
Maintenance
Outer Case Cleaning
Instructions for cleaning the projector's outer case.
Lens Surface Cleaning
Guidelines for cleaning the projection lens surface.
Troubleshooting
Power and Image Display Issues
Troubleshooting steps for power, no image, and fuzzy image problems.
Image Quality and Remote Control Issues
Troubleshooting for pale images, remote control response, and menu issues.
Computer and Video Input Troubleshooting
Solutions for computer or video device image display problems.
Technical information
PJLink Protocol and Control Commands
Details the PJLink protocol commands for projector control.
Using Art-Net Function
Explains how to use the Art-Net protocol for projector control.
Control details
Light Output Control Details
Specifies performance and parameter ranges for light output control.
Input Select Control Details
Details input selection parameters for Art-Net channel settings.
Lens Control Details
Specifies parameters for lens position, shift, focus, and zoom control.
Lens Function Select and Control Details
Lens Function Select Parameters
Defines parameters for lens function selection.
Lens Control Parameters
Specifies parameters for lens adjustment and command execution.
Power and Shutter Control Parameters
Details parameters for power control and shutter operations.
Fade-In/Fade-Out Control Parameters
Specifies parameters for controlling fade-in and fade-out times.
Geometry and Freeze Control Details
Geometry Control Parameters
Specifies parameters for geometry and custom masking functions.
Freeze and Color Control Parameters
Details parameters for freeze function and color/tint adjustments.
Enable/Disable Control and Command Transmission
Channel Enable/Disable Operation
Sets whether channel operations are accepted or disabled.
Control Commands via LAN
Explains how to connect and send commands via LAN.
RS-232C terminals
RS-232C Communication Connection
Details connection diagrams for single and multiple projectors via RS-232C.
Digital LINK Compatible Device Connection
Explains connection using DIGITAL LINK compatible devices.
When multiple projectors are controlled
All Projectors Controlled Together
Settings for controlling multiple projectors simultaneously using RS-232C.
Projectors Controlled by Group Unit
Settings for controlling multiple projectors grouped by unit using RS-232C.
Upgrade Kit
Upgrade Kit Function Extensions
Details extended functions like keystone, curved correction, and masking with the Upgrade Kit.
List of compatible signals
Compatible Signal List
Specifies video signals compatible with RGB, DVI-D, HDMI, and DIGITAL LINK inputs.
Specifications
Projector Power and DLP Chip Specifications
Details power supply, consumption, DLP chip size, and pixel count.
Lens, Light Source, and Contrast Specifications
Provides details on lens specifications, light source, and contrast ratio.
Dimensions, Weight, and Noise Level
Lists physical dimensions, weight, and noise level specifications.
Laser Classification and Operating Environment
Specifies laser safety classification and operating environment requirements.
Remote Control and Dimensions Specifications
Details remote control power, dimensions, and operating range.
Precautions for attaching the Ceiling Mount Bracket
Ceiling Mount Bracket Usage and Installation
Guidelines for using specified brackets and professional installation.
Screw Hole Specifications and Tightening Torques
Details screw hole specifications and torque requirements for mounting.

Table of Contents