Table of Contents
Advertisement
Quick Links
LT 4610 / LT 4611
SYNC GENERATOR
LT 4610SER01
LT 4610SER02
LT 4610SER03
LT 4610SER24
LT 4611SER21
LT 4611SER22
LT 4611SER23
LT 4611SER24
Instruction Manual
Thank you for purchasing.
Please carefully read this instruction manual and the included "GENERAL SAFETY SUMMARY."
Please use the product safely.
GPS/TC
12G-SDI
PTP
8K
SYNC 3 OUT ADD
SDI OUTPUT
AUDIO OUTPUT
8K
Advertisement
Table of Contents
Related Manuals for Leader LT 4611
Summarization of Contents
General Safety Summary
Operating Precautions
Covers important safety and operational guidelines before using the instrument.
Introduction
Scope of Warranty
Details LEADER's warranty obligations and exclusions for the instrument.
Trademarks
Lists company and product names that are trademarks or registered trademarks.
Product Configuration
Main Unit
Describes the standard features of the LT 4610 and LT 4611 main units.
Hardware Options
Lists and describes the optional hardware components available for LT 4610 and LT 4611.
Software Options
Details the software options available for installation on the LT 4610, including licensing.
Features
LT 4610 Main Unit
Details the features of the LT 4610 sync generator, including genlock and output capabilities.
LT 4611 Main Unit
Details the features of the LT 4611 sync generator, including genlock and output capabilities.
LT 4610SER01 (GPS/TC)
Describes the GPS/TC hardware option for the LT 4610, covering synchronization and time code.
LT 4610SER02 (12G-SDI)
Details the 12G-SDI hardware option for the LT 4610, supporting 4K video formats.
LT 4610SER03 (PTP)
Explains the PTP hardware option for the LT 4610, supporting Precision Time Protocol.
LT 4610SER24 (8K)
Describes the 8K software option for the LT 4610, enabling 8K pattern output via 12G-SDI.
LT 4611SER21 (SYNC 3 OUT ADD)
Details the SYNC 3 OUT ADD software option for the LT 4611.
LT 4611SER22 (SDI OUTPUT)
Explains the SDI OUTPUT software option for the LT 4611.
LT 4611SER23 (AUDIO OUTPUT)
Describes the AUDIO OUTPUT software option for the LT 4611.
LT 4611SER24 (8K)
Details the 8K software option for the LT 4611, enabling 8K pattern output.
Specifications
LT 4610 Main Unit
Provides detailed specifications for the LT 4610 main unit, including compliant standards and I/O connectors.
LT 4611 Main Unit
Provides detailed specifications for the LT 4611 main unit, including compliant standards and I/O connectors.
LT 4610SER01 (GPS/TC)
Specifies the technical details for the LT 4610SER01 GPS/TC option.
LT 4610SER02 (12G-SDI)
Specifies the technical details for the LT 4610SER02 12G-SDI option.
LT 4610SER03 (PTP)
Specifies the technical details for the LT 4610SER03 PTP option.
LT 4611SER21 (SYNC 3 OUT ADD)
Specifies the technical details for the LT 4611SER21 SYNC 3 OUT ADD option.
LT 4611SER22 (SDI OUTPUT)
Specifies the technical details for the LT 4611SER22 SDI OUTPUT option.
LT 4611SER23 (AUDIO OUTPUT)
Specifies the technical details for the LT 4611SER23 AUDIO OUTPUT option.
LT 4610SER24 / LT 4611SER24 (8K)
Specifies the technical details for the LT 4610SER24 / LT 4611SER24 (8K) option.
Panel Description
Front Panel
Provides a detailed description of the front panel controls, indicators, and connectors.
Rear Panel
Details the rear panel connectors and their functions for LT 4610 and LT 4611.
Basic Operation
Turning the Power On
Explains how to power on the instrument, including redundant power supply operation.
Alarm Indications
Details the front panel alarm indicators and how to check alarm details.
Installing the SFP / SFP+ Transceiver Module (SER03)
Details the procedure for installing SFP/SFP+ transceiver modules into the rear panel port.
Signal I/O
Explains how signals are input and output through the instrument's various connectors.
Menu Operations
Explains how to navigate and operate the instrument's menus and settings.
Genlock Operation
Details the procedures for setting up and operating the genlock function in various modes.
Status Menu
Genlock Status Display
Displays the current status of the genlock operation, including input signal status.
Alarm Display
Details the alarm indications on the front panel and in the status menu.
Attention Display (SER01)
Displays attention states related to GPS signals and time codes for SER01.
Info Menu
Genlock Setting Display
Shows the current settings entered in the GENLOCK menu.
SDI Setting Display
Shows the items set on the SDI menu, reflecting SER22 installation.
12G Setting Display (SER02)
Shows the items set on the 12G OPTION menu.
Genlock Menu
Selecting the Genlock Mode
Guides the user through selecting the genlock mode for synchronization.
Selecting the Genlock Format
Explains how to select the genlock format when in manual mode.
Adjusting the Timing
Describes how to adjust output signal timing relative to the reference signal.
Setting the Recovery Operation
Configures how the instrument recovers after a reference signal loss.
Setting the Genlock Log
Explains how to manage the genlock log entries.
BLACK Menu
Selecting the Black Format
Guides the user on selecting the black signal format.
Adjusting the Timing
Describes how to adjust the black signal timing relative to the reference.
Turning the Time Code On and Off (SER01)
Explains how to enable or disable time code insertion.
Common Black Signal Settings
Describes how to synchronize Black 2-6 settings to Black 1.
SDI Menu
Setting the SDI Format
Guides the user through setting the SDI signal format.
Adjusting the Timing
Describes how to adjust the SDI signal timing relative to the reference signal.
Selecting the Pattern
Guides the user on selecting the output pattern for SDI signals.
Turning Safety Area Markers On and Off
Explains how to turn safety area markers on and off.
Configuring the Pattern Scroll Feature
Explains how to configure the pattern scrolling feature.
Setting ID Characters
Guides the user on configuring ID characters for display on the pattern.
Setting Logos
Guides the user on setting and displaying logos on the SDI output.
Configuring Embedded Audio
Explains how to embed audio channels into SDI signals.
AES/EBU Menu
Setting the AES/EBU Output
Guides the user on configuring AES/EBU output and silence output settings.
Setting the Silence Output
Explains how to set the silence output parameters.
WCLK Menu
Adjusting the Timing
Explains how to adjust the word-clock signal timing.
ETC Menu
Turning Lip Sync On and Off
Guides the user on turning lip sync patterns on and off.
GPS OPTION Menu (SER01)
Setting the LTC Output
Details how to set the LTC output parameters.
Setting the CW I/O
Describes how to set the CW I/O parameters.
Selecting Input or Output
Explains how to select CW IN/OUT as input or output.
Selecting the Output Frequency
Guides the user on selecting the output frequency for CW I/O.
12G OPTION MENU (SER02)
Setting the SDI Format
Guides the user through setting the SDI signal format for 12G.
Adjusting the Timing
Describes how to adjust the SDI signal timing relative to the reference signal.
Selecting the Pattern
Guides the user on selecting fixed or user-created patterns.
Turning Safety Area Markers On and Off
Explains how to turn safety area markers on and off.
Configuring the Pattern Scroll Feature
Explains how to configure pattern scrolling.
Setting the Pattern Change
Details how to set the pattern change behavior.
Setting ID Characters
Guides the user on configuring ID characters for display.
Setting Logos
Explains how to set and display logos.
Setting the Moving Box
Details how to configure the moving box feature.
Turning Lip Sync On and Off
Explains how to turn lip sync patterns on and off.
Turning User Payload ID On and Off
Guides the user on turning user payload ID on and off.
Configuring Embedded Audio
Explains how to embed audio channels into SDI signals.
8K OPTION MENU (SER24)
Setting the SDI Format
Guides the user through setting the SDI signal format for 8K output.
Adjusting the Timing
Describes how to adjust the SDI signal timing for 8K output.
Selecting the Pattern
Guides the user on selecting fixed or user patterns for 8K output.
Turning Safety Area Markers On and Off
Guides the user on turning safety area markers on/off for 8K.
Configuring the Pattern Scroll Feature
Explains how to configure pattern scrolling for 8K.
Setting the Pattern Change
Details how to set pattern change for 8K.
Setting ID Characters
Guides the user on configuring ID characters for 8K.
Setting Logos
Explains how to set and display logos for 8K.
Setting the Moving Box
Guides the user on setting the moving box feature for 8K.
Turning Lip Sync On and Off
Explains how to turn lip sync patterns on and off for 8K.
Turning User Payload ID On and Off
Guides the user on turning user payload ID on and off for 8K.
Configuring Embedded Audio
Explains how to embed audio channels for 8K SDI signals.
PTP OPTION MENU (SER03)
PTP Master
Details settings for PTP master mode.
PTP Slave
Details settings for PTP slave mode.
SYSTEM MENU
Setting the Backlight
Guides the user on setting the LCD backlight to ON, AUTO OFF, or OFF.
Turning Key Lock On and Off
Explains how to enable or disable the front panel key lock function.
Configuring Presets
Details how to set, save, and recall presets for the instrument configuration.
Configuring Ethernet Settings
Guides the user on setting up Ethernet parameters for network connectivity.
Setting the PTP Ethernet Parameters (SER03)
Guides the user on setting PTP Ethernet parameters.
Date and time settings
Guides the user on setting the internal date and time.
Setting the Time Code (SER01/SER03)
Guides the user on setting time code parameters.
Setting GPS/PTP (applies to both SER01 and SER03)
Guides the user on setting GPS and PTP parameters.
Setting the Alarm (SER01)
Details how to set alarms output from LTC IN/OUT connectors.
Turning the Web Browser On and Off
Explains how to turn the web browser interface on and off.
Initialization
Guides the user on initializing instrument settings.
Viewing the Serial Numbers
Guides the user on viewing serial numbers of the main unit and options.
Viewing and Installing Software Options
Explains how to view and install software options.
Viewing the Version Information
Guides the user on viewing firmware and FPGA version information.
LOGO APP
Installation
Provides step-by-step instructions for installing the Logo App software on a PC.
How to Use
Guides the user through converting bitmap data to monochrome format for logo overlay.
HTTP
How to Use
Details the steps required to access and use the instrument's web interface.
STATUS tab
Explains the content and purpose of the STATUS tab in the web interface.
GENLOCK tab
Details the settings related to genlock operation available in the GENLOCK tab.
BLACK tab
Explains the settings for black output available in the BLACK tab.
SDI tab
Guides the user on specifying settings related to SDI output in the SDI tab.
AES/EBU tab
Explains the settings for AES/EBU output and silence output in the AES/EBU tab.
WCLK tab
Details the settings related to WCLK output in the WCLK tab.
ETC tab
Explains the settings related to lip sync in the ETC tab.
SYSTEM tab
Guides the user on configuring the LT 4610 through the SYSTEM tab.
GPS tab
Explains the settings for LTC output and CW I/O in the GPS tab.
12G SDI tab
Details the settings related to SDI output in the 12G SDI tab.
Editing User Payload ID
Guides the user on editing the user payload ID in the 12G SDI tab.
Uploading User Pattern
Explains how to upload user patterns via the DATA UPLOAD window.
PTP tab
Guides the user on specifying PTP settings in the PTP tab.
SNMP
How to Use
Guides the user on setting up and using SNMP for instrument control and monitoring.
Enterprise MIB
Details the enterprise MIB structure and how to retrieve the MIB file.
status Group
Lists SNMP OIDs related to the instrument's status.
genlockRef Group
Lists SNMP OIDs related to genlock references.
black*Ref Group
Lists SNMP OIDs related to black signal references.
sdi*Format Group
Lists SNMP OIDs related to SDI formats.
sdi*Timing Group
Lists SNMP OIDs related to SDI timing.
sdi*Pattern Group
Lists SNMP OIDs related to SDI patterns.
sdi*Component Group
Lists SNMP OIDs related to SDI components.
sdi*SafetyArea Group
Lists SNMP OIDs related to SDI safety areas.
sdi*Scroll Group
Lists SNMP OIDs related to SDI scrolling.
sdi*PatternChange Group
Lists SNMP OIDs related to SDI pattern changes.
sdi*Id Group
Lists SNMP OIDs related to SDI IDs.
sdi*Logo Group
Lists SNMP OIDs related to SDI logos.
sdi*Audio Group
Lists SNMP OIDs related to SDI audio.
sdi*Lipsync Group
Lists SNMP OIDs related to SDI lipsync.
ptp*Mode Group
Lists SNMP OIDs related to PTP modes.
ptp*ProfileType Group
Lists SNMP OIDs related to PTP profile types.
Appendix
List of Settings
Provides a comprehensive list of settings and their default values across various menus.
Menu Tree
Provides a visual representation of the menu structure.
Firmware Update History
Lists changes and new features introduced in firmware updates for LT 4610 and LT 4611.
Need help?
Do you have a question about the LT 4611 and is the answer not in the manual?
Questions and answers