Related Manuals for IBC SOLAR AeroFlat
Summarization of Contents
General Information and Standards
Important Information and Dimensioning Standards
Details crucial information and standards for dimensioning PV systems.
Solar Module Criteria
Specifies criteria for the use of framed solar modules in the system.
Lightning and Surge Protection Guidelines
Outlines requirements and recommendations for lightning and surge protection.
Cable Routing Best Practices
Provides guidelines for proper cable routing during installation.
IBC System Variants Overview
AeroFix System Configurations
Details specific AeroFix system configurations like Southern and East-West orientations.
AeroFlat System Configuration
Details the AeroFlat system configuration, installed parallel to the roof.
PV System Planning Essentials
Module Field Size Restrictions
Explains limitations on module field sizes due to thermal expansion.
Ensuring Roof Load Capacity
Emphasizes checking roof load capacity and insolation by a static expert.
AeroFix System Installation Guide
Base Rail Installation
Covers the preparation and installation of base rails for the AeroFix system.
Third Base Rail Installation
Describes the installation of an optional third base rail for load distribution.
Support Installation
Details the installation and positioning of supports for the AeroFix system.
Ballast Application
Explains how to apply ballast stones and ballast rails for system stability.
Snow Load Rail Installation
Instructions for installing snow load rails to support modules in snowy conditions.
Module Assembly Procedure
Step-by-step guide for assembling and securing solar modules onto the mounting system.
Wind Plate Assembly
Covers the installation of wind plates for aerodynamic stability.
Cable Clip Attachment
Instructions for attaching cable clips for proper wire management.
AeroFlat System Installation Guide
Base Rail Installation
Covers the installation of base rails for the AeroFlat system.
Support Rail Installation
Details the installation of support rails for the AeroFlat system.
Ballast Application for AeroFlat
Explains how to apply ballast stones for the AeroFlat system.
Module Assembly Procedure
Step-by-step guide for assembling and securing solar modules onto the AeroFlat system.
Appendix and Supplementary Information
IBC AeroFix Screw Torque Information
Provides specific information on screw connection tightening torques for AeroFix.
PV System Maintenance Instructions
Guidelines and procedures for routine maintenance of the PV system.
Stiction Log for IBC Systems
Test record template for determining stiction coefficients of the system.
PV System Planning Checklist
Questionnaire for gathering site and system information for installation planning.
Need help?
Do you have a question about the AeroFlat and is the answer not in the manual?
Questions and answers