Table of Contents
Advertisement
Boot Up NumLock Status [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [On] [Off]
Typematic Rate Setting [Disabled]
Allows you to enable or disable the keyboard typematic rate setting. Set to
[Enabled] to configure the Type Rate and Type Delay items.
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay
become configurable only when the item Typematic Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which character repeats when you hold a
key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before key strokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
Full Screen Logo Show [Enabled]
Allows you to enable or disable the ASUS Mylogo2™ feature.
Configuration options: [Disabled] [Enabled]
The ASUS MyLogo2 is automatically installed when you install ASUS
Update from the support CD. You need to launch ASUS Update, then
ASUS MyLogo2 to change the full screen logo.
5-40
Chapter 5: BIOS setup
Advertisement
Table of Contents
