Advertisement
Quick Links
Aktenvernichter
Document Shredders
Destructeurs de Documents
Papiervernietigers
Distruggidocumenti
Destructoras de Documentos
Dokumentförstörare
IDEAL 2501
IDEAL 2501-Cross/Cut
IDEAL 2503
IDEAL 2503-Cross/Cut
D Betriebsanleitung
GB Operating Instructions
F Mode d´emploi
NL Gebruiksaanwijzing
I
E Instrucciones de uso
S Bruksanvisning
1
Manuale d´istruzione
Advertisement
Related Manuals for IDEAL 2503-Cross/Cut
Summarization of Contents
General Safety Warnings
Keep Children Away from Machine
Warning against children operating the machine.
Avoid Reaching into Cutting Mechanism
Warning against inserting hands into the cutting head.
Keep Long Hair Away from Machine
Warning about long hair getting entangled in the cutting head.
Avoid Loose Clothing and Ties
Warning against ties and loose clothing getting caught.
Avoid Loose Jewelry
Warning about loose jewelry getting entangled.
Machine Operation and Safety
Ensure Door is Closed
The door must be closed when operating the machine.
Maintain Access to Power Outlet
Ensure free access to the mains power connection.
Switch Off When Not In Use
Switch off the machine for prolonged periods of non-use.
Cleaning and Maintenance Safety
Unplug Before Cleaning
Remove the plug from the socket before cleaning the machine.
Do Not Perform Self-Repairs
Avoid performing any repairs on the document shredder yourself.
Installation Procedure
Place Machine on Cabinet
Open the door, place the machine on the cabinet, and release.
Insert Collection Bag
Insert the provided plastic bag into the collection area.
Finalize Power Connection
Close the door and plug the power cord into the wall socket.
Basic Operation
Machine Ready and Auto Start
Green light indicates readiness; automatic start when paper is inserted.
Automatic Stop After Shredding
Machine stops automatically when no more paper is fed.
Stop with Open Door
Machine stops automatically if the safety flap or door is opened.
Stop with Full Bag
Machine stops when the plastic collection bag is full.
Handling Paper Jams and Overloads
Paper Jam and Overload Response
Machine stops for too much paper or jams, with automatic reverse.
Reverse Function for Paper Removal
Use the "R" switch to reverse and remove jammed paper.
Restore Operation After Overload
Press the switch and feed less paper to restore operation after overload.
Safety Flap Operation
Machine stops if the safety flap is open; close and press switch to resume shredding.
Maintenance and Lubrication
Oil the Cutting Mechanism
Lubricate the shredding mechanism when performance decreases or after emptying the bin.
Troubleshooting Common Issues
Machine Will Not Start
Check power connection and switch status if the machine does not start.
Power Connection Check
Verify that the power plug is properly inserted into the socket.
Switch and Indicator Check
Ensure the power switch is pressed and the green indicator light is on.
Centered Paper Feed
Ensure paper is fed into the center of the opening, aligning with the photo cell.
Check Door Status
Verify that the machine's door or safety flap is closed.
Check Collection Bag Status
Confirm that the plastic collection bag is not full.
Malfunction Resolution
Machine Does Not Stop
Clean the photo cell if the machine fails to stop.
Machine Stops Due to Overload
Machine stops due to overload; allow a 10-15 minute cooling down period.
Customer Support
Contact for Unresolved Issues
Contact the service team if problems persist after troubleshooting.
Recommended Accessories and Supplies
Recommended Accessories
List of recommended accessories for the machine.
Shredder Oil and Bags
Information on environmentally friendly oil and plastic bags.
Technical Specifications and Compliance
Safety Certifications and Compliance
Machine complies with EC directives and safety regulations.
Noise Level Information
Details on the machine's sound level, which is below the ISO 7779 standard.
Declaration of Conformity
EC Compliance Statement
Declaration of conformity with relevant EC directives and harmonised standards.
Need help?
Do you have a question about the 2503-Cross/Cut and is the answer not in the manual?
Questions and answers