Table of Contents
Advertisement
Available languages
Available languages
Safety Information
Follow all safety precautions outlined in these operating instruc-
tions. Improper use of this tool can cause severe injury from fire,
electrical shock, or burns.
1.
Read and understand these operating instructions before using tool.
2.
Only well-instructed adults should use tool. Never allow children to use tool.
3.
Do not touch hot tool nozzle. Severe burns will occur.
4.
Do not touch melted glue. Severe burns will occur.
5.
Do not operate tool
• where highly flammable liquids or gases are present
• if tool is exposed to rain or in damp or wet areas
• if tool is damaged
6.
Do not glue overhead. Hot, melted glue may drop on you.
7.
Wear safety glasses or goggles when operating tool.
8.
Stay alert. Use common sense while operating tool.
9.
Unplug tool when not in use.
10.
Keep finger off of trigger until ready to glue.
11.
Use wire stand when setting hot tool down. Do not lay hot tool on its side.
12.
Do not apply petroleum based wood stains to glue joints. The bonding power of glue
can break down.
13.
Do not glue items that will be exposed to temperatures over 140° F.
14.
Do not alter tool in any way. Only use accessories designed for this tool.
15.
Maintain tool with care.
• Keep tool clean.
• Keep handles dry, clean, and free of oil and grease.
• Inspect power cord often. If damaged, have repaired by factory service center.
• Never carry tool by power cord.
• Never yank power cord to unplug tool.
• Keep power cord away from heat, oil, and sharp edges.
• Never oil or grease any part of tool.
16.
Always store tool and glue sticks
• out of children's reach
• in a high or locked place that is dry
17.
This glue is not intended for heavy objects or as a replacement for structural
fasteners.
!
WARNING
WARNING ICON
G 001
2
Advertisement
Table of Contents
