Table of Contents
Advertisement
This manual is based on firmware version 9.47-
1837. If you have an older or newer firmware ver-
sion some of the functions mentioned in this man-
ual may not be present or may operate differently.
We are committed to your satisfaction with this product. If you have any ques-
tions or require technical assistance please contact us at any of the coordinates
below:
Flanders Scientific, Inc.
470 Satellite Blvd. NE
Suite P
Suwanee, GA 30024
Phone: +1.678.835.4934
Fax: +1.678.804.1882
E-Mail:
Support@FlandersScientific.com
www.FlandersScientific.com
Click Here to Open Print Friendly
Version of this Document
Many of the topics covered in this
manual are also covered by our
Video Manual available at:
www.FlandersScientific.com
LCD Monitor User Manual
Version 3.6 (Updated 10.17.2012)
LM-0750W
LM-0950W
LM-1760W
LM-1770W
CM-170W
LM-2140W
LM-2340W
LM-2340TD
LM-2461W
Advertisement
Table of Contents
Related Manuals for Flanders Scientific LM-2461W
Summarization of Contents
Safety Precautions
General Operating & Safety Guidelines
Essential guidelines for safe operation, handling, and maintenance of the monitor.
Product Care and Maintenance
Procedures for proper product care, servicing, and screen maintenance.
Monitor Controls and Connections
Front Panel Interface
Identification and function of front panel buttons, knobs, and connectors.
Rear Panel Connectivity
Overview of rear panel input/output connectors and supported signal formats.
Menu Navigation and System Status
Navigating the Monitor Menus
Guide to navigating the monitor's main menu and submenus using keypad controls.
Understanding System Status
Details on the System Status category for viewing monitor configuration and information.
Function Menu Configuration
Function Menu Overview
How to organize and assign user-selectable functions to monitor keypad buttons.
Overview of Assignable Functions
Explanation of assignable functions like Scopes, Markers, and Overscan.
Overscan Function Details
Detailed explanation and examples of the Overscan function and its interaction with pixel mapping.
Sub Window and Pixel Mapping
Using Sub Window mode and various Pixel Mapping options for image display.
Pixel Position and H/V Delay Modes
Adjusting pixel position and using H/V Delay mode for signal analysis.
Mono Mode and Zoom Functionality
Functionality of Mono Mode for grayscale display and Zoom for image magnification.
Aspect Ratio and Full Screen Settings
Adjusting SD aspect ratio and stretching images to fill the screen.
Pixel Zoom Feature
How to use the Pixel Zoom feature for detailed image analysis and magnification.
LUM Coloring for Exposure Analysis
Utilizing LUM Coloring to identify overexposed areas using artificial color mapping.
Measurement Function for Signal Analysis
Using the Measurement function for real-time YRGB value analysis and crosshair positioning.
Focus Assist Feature
How to use the Focus Assist feature for detailed focus checking with visual aids.
Level B Variable Wipe
Functionality of Level B Variable Wipe for adjusting split screen positioning in 3Gbps SDI.
Still Frame and DSLR Zoom
Freezing video frames and using DSLR Zoom for camera preview monitoring.
DSLR Zoom Details
Further details and examples on using the DSLR Zoom feature with different resolutions.
Safety Broadcast Monitoring Mode
Special monitoring mode for control rooms, displaying multiple meters and timecode.
AFD (Active Format Description) Reader
Using the Active Format Description reader to display and mark image aspect ratios.
Anamorphic De-Squeeze Function
De-squeezing HD signals from anamorphic lenses for accurate real-time monitoring.
Invert Screen and CX Scale Options
Invert Screen function (LM-0950W only) and custom CX Scale for specific recorder outputs.
Logarithmic Gamma Monitoring
Monitoring uncorrected S-Log or C-Log footage with inverse Log gamma response.
Tally Functions: Rec. Status and On-Screen
Using Rec. Status Tally for camera record flags and On-Screen Tally for visual status.
Marker Menu Settings
Marker Menu Structure
Overview of marker menu organization and how to set marker preferences.
Marker Functionality Explained
Detailed functions for Area Marker, Safety Marker, Marker BG, Center Marker, and Color.
Video Menu Options
Video Menu Organization
Overview of the Video Menu and its available settings for image adjustment.
Core Video Adjustments
Functions including Gamma Select, Log Mode, Color Temperature, and Sharpness Level.
Signal Mode and Video Processing
Settings for Signal Mode (Film, TV, Auto) and Processing options (Normal, Fast, Noise Reduction).
Composite and Component Input Setup
Configuring Composite and Component video inputs for optimal signal reception.
SDI Format Configuration
Manual selection of SDI formats for monitors with 3Gbps SDI capability.
Scopes and VU Meters Menu
Scopes & VU Meters Menu Structure
Organization of the Scopes & VU Meters menu for display preferences.
Configuring Scopes and Audio Levels
Setting up Scopes & VU Meters profiles, Window 1 & 2, Waveform, and Audio Levels.
Audio Display Settings
Configuring audio display modes (Groups/Pairs) and selecting audio channels.
Audio Level Limits and OSC Mode
Setting max audio levels and using OSC Mode for quad viewing on LM-0750W.
Visual Examples of Scope Modes
Visual examples of various available scope modes like Luminance, Vector Scope, and Histograms.
System Menu Settings
System Menu Organization
Overview of the System Menu organization and its available settings.
System Input and 3G Level B Configuration
Functions for DVI selection, Component input, and 3G Level B monitoring options.
3G Level B 3D Monitoring Features
Details on 3G Level B 3D monitoring modes and diagnostic tools without glasses.
SDI Hue and Backlight Adjustments
Adjusting SDI Hue and setting the Backlight level for peak white luminance.
Power Saving and Display Options
Power saving backlight interval, LED keypad lights, and Part Display toggle.
Profile Management: Load and Save
Loading and saving monitor settings using recallable profiles.
Alarm Monitoring Menu
Alarm Menu Structure
Organization of the Alarm Menu for configuring monitoring and warning parameters.
Alarm Event Configuration
Functions for setting alarm types (Safety, IRE, RGB) and Visual Alarm display.
Remote Alarm Monitoring Setup
Enabling remote alarm monitoring via FSI's dedicated software.
Alarm Thresholds: IRE and Audio
Setting the IRE threshold for alarms and the time for audio mute alarms.
Alarm Area and UMD Display Settings
Adjusting the monitored screen area and selecting UMD display options.
UMD Color, Position, and Audio Meter
Configuring UMD text color/position and audio meter placement.
RS422 Communication Address
Setting the monitor's RS422 address for remote control and alarm monitoring.
RS422 Communication Parameters
Configuring Baud Rate and Parity for RS422 communication.
On-Screen Display (OSD) Menu
OSD Menu Organization
Organization of the OSD Menu for configuring onscreen display elements.
OSD Functionality Explained
Functions for Status Display, Menu/Status/Rotary position, Source ID, and Time Code.
GPI Interface Menu
GPI Menu Organization
Organization of the GPI Menu for assigning functions to the GPI interface.
GPI Pinout and Wiring
Details on GPI RJ-45 connector pin assignments and wiring for remote control.
Audio Menu Settings
Audio Menu Organization
Organization of the Audio Menu for selecting and configuring audio inputs.
Audio Input Selection and Sync
Functions for SDI, Component, CVBS, DVI audio selection, Audio Sync, and Lockout.
Display Alignment Menu
Display Alignment Menu Structure
Organization of the Display Alignment Menu for calibration and settings.
Display Calibration and Settings
Functions for Start Display Alignment, Reset Factory, RGB Gain/Bias, and Video Clipping.
Monitor Specifications Overview
Panel and Display Specifications
Technical specifications of the monitor panel including size, resolution, and backlight.
Connectivity and Supported Formats
Details on all available input and output connectors and supported signal formats.
Key Product Features
List of key features such as Pixel Mapping, Blue Only, and Monochrome modes.
Power, Physical, and Pricing Details
Specifications related to power requirements, consumption, and physical dimensions/weight.
Monitor Dimensional Diagrams
LM-0750W Diagrams
Technical diagrams illustrating the front, side, and rear views of the LM-0750W monitor.
LM-0950W Diagrams
Technical diagrams illustrating the front, side, and rear views of the LM-0950W monitor.
CM-170W Diagrams
Technical diagrams illustrating the CM-170W monitor with and without stand.
LM-2140W Diagrams
Technical diagrams illustrating the LM-2140W monitor with and without stand.
LM-2340W / LM-2340TD Diagrams
Technical diagrams illustrating the LM-2340W/LM-2340TD monitors with and without stand.
LM-2461W Diagrams
Technical diagrams illustrating the LM-2461W monitor with and without stand.
Need help?
Do you have a question about the LM-2461W and is the answer not in the manual?
Questions and answers