Related Manuals for Lumagen Radiance 2041
Summarization of Contents
Introduction to Lumagen Radiance Video Processors
Key Features of Radiance Processors
Highlights the primary features of the Radiance series, including scaling, processing, and connectivity.
Overview of Radiance Video Processor
Front and Rear Panel Descriptions
Details the components and indicators on the front and rear panels of the Radiance unit.
HDMI and Audio Connections
Explains the various HDMI and audio output connections available on the Radiance.
Remote Control and Block Diagram
Illustrates the remote control layout and the functional block diagram of the Radiance.
Configuration Memories Explained
Describes the four input memories and their sub-memories for setup and calibration.
Quick Start Guide and Installation
Installation Instructions and Setup
Provides step-by-step instructions for initial setup, connections, and powering on the Radiance.
Basic Commands and System Configurations
System Configuration Examples
Illustrates common ways to connect receivers, displays, and audio components to the Radiance.
Input Selection and Aspect Ratio
Details how to select inputs and adjust aspect ratios for optimal display of content.
Status Screen and Quick Keys
Explains how to view status information and use quick keys for essential functions.
Video Configuration Settings
Video Output Setup and Custom Modes
Configures output modes, custom timings, and color management for video signals.
Styles Menu and Output Formatting
Sets HDMI format, color, dither, mask, shrink, aspect ratio, and graybars for display.
HDMI Input Setup and Controls
Manages HDMI input configuration, video type, EDID, hotplug, and auto aspect settings.
Input Picture and Size Adjustments
Adjusts input picture parameters like levels, color, hue, Y/C delay, scaling, and aspect ratio.
Input Deinterlacing and Enhancement
Controls deinterlacing modes, motion detection, noise reduction, and adaptive contrast for inputs.
Audio Configuration and EDID Management
Audio Menu Introduction and Navigation
Guides users through the audio menu for configuring EDID and output settings.
Audio EDID Settings and Examples
Explains audio EDID reporting and provides examples for various system configurations.
System Calibration Procedures
Overview of Radiance Calibration
Discusses the importance of calibration and how the Radiance facilitates it.
Miscellaneous Commands and Settings
System Settings and OSD Control
Configures menu timeouts, OSD display, input reselection, and initial power state.
Test Patterns and Remote Control Functions
Details test pattern usage, LED setup, RS-232, and remote control customization.
Configuration Memory and Saving
Manages configuration memory usage, saving, undo, and restoring factory defaults.
3D Support and Setup
3D Types and Output Settings
Explains supported 3D types and how to configure output formats and modes.
3D Setup Procedures for Displays
Guides on setting up for compliant and non-compliant 3D displays and sources.
Darbee Visual Presence (DVP) Enhancement
Darbee Menu and Control Options
Details how to access and adjust the Darbee enhancement feature for improved image quality.
Command Interface and Control
Direct Commands and Menu Shortcuts
Lists direct commands for output resolution, mode, rate, aspect ratio, and miscellaneous functions.
IR and ASCII Command Lists
Provides references for IR and RS232 (ASCII) command interfaces for remote control.
Technical Specifications
Inputs, Processing, Outputs, and Miscellaneous
Summarizes the technical specifications of the Radiance video processor's inputs, processing, and outputs.
Need help?
Do you have a question about the Radiance 2041 and is the answer not in the manual?
Questions and answers