Related Manuals for HPC Forno Series
Summarization of Contents
Important Safety Information
Technical Support
Information and support contact for the dealer and manufacturer.
Symbol Legend
Explains safety alert symbols and important instruction indicators used in the manual.
Installers Safety Information
Guidance for installers on following codes, updates, and responsibilities.
Remote LP Tank System Enclosure Requirements
Propane Cylinder Safety Requirements
Safety guidelines for using, storing, and selecting propane cylinders for the appliance.
Lighting the Oven
Using the Oven as a Grill
Instructions for using the oven as a grill, including rack placement and food preparation.
First Firing
About Your Refractory Oven
Details on the oven's refractory material, its properties, and construction.
Your Oven's First Firing Process
Step-by-step instructions for the initial heat-up process using gas only.
Recommended Wood Type
Recommendations for using specific types of wood for optimal oven performance and operation.
Fomo Series Installation
How to Disassemble and Reassemble Your Oven
A method for moving the oven when it cannot be rolled, using a transporting kit.
Natural Gas Connection for Fomo Series
Instructions and requirements for connecting the oven to a natural gas supply.
Villa Series Installation
Cut-out Diagram for Countertop
Dimensions and layout for creating a countertop opening for the oven installation.
Side Support and Flange Placement
Details on how to position side supports and locking clips for countertop installation.
Villa Series Preparation
Pre-installation checks for parts presence and installer requirements.
Villa Series Assembly Guide
Step-by-step guide for assembling the Villa Series oven onto its installation base.
Front Cabinet Elevation
Illustration of the front view of the cabinet with dimensions and door ventilation details.
Rear Cabinet Elevation
Illustration of the rear view of the cabinet with vent requirements and LP tank storage restrictions.
Top View of Cabinet Installation
Diagram showing the top layout, including countertop and back wall clearance requirements.
Natural Gas Connection for Villa Series
Instructions for connecting the Villa Series oven to a natural gas supply.
Di Napoli Series Installation
Important Installation Information
Critical details on minimum clearances to combustible and non-combustible construction.
Electrical and Gas Requirements
Specifies electrical (120VAC) and gas (Natural/LP) connection requirements for the oven.
Mason Built Base Requirements: Side Bearing
Guidelines for building a mason base with side bearing construction for oven support.
Mason Built Base Requirements: Front/Rear Bearing
Guidelines for building a mason base with front/rear bearing construction for oven support.
Concrete Base Requirements
Specifies electrical outlet and gas hookup requirements for the concrete base.
Chimney Diameter
Recommendations for selecting the correct chimney diameter for the Forno de Pizza.
Chimney Height
Standards for extending chimney height above the roofline for safety and performance.
Detail on Concrete Base for Hearth
Illustrates how the hearth rests on a concrete block wall notch for proper installation.
Product Specifications
Technical specifications including dimensions, electrical, and gas supply details.
Need help?
Do you have a question about the Forno Series and is the answer not in the manual?
Questions and answers