Table of Contents Warning Device Description Indication for Use Contraindications Warnings Precautions Potential Adverse Effects/Events Operating Profile Operating Procedure • Getting Started & Charging Components • Internet Connectivity • Start-Up System for Patient Use • Therapy Activities • System Removal •...
The use of the REAL Immersive System is intended to be in a clinical • Press power button to power on tablet or restart tablet. The power button is environment, supervised by a medical professional trained in rehabilitation therapy.
30 cm (12 inches) to any WARNINGS part of the REAL Immersive System, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. If a patient complains of motion sickness, dizziness, headache, eye strain, or fatigue when using the device, stop use of device immediately.
The patient must be seated at all times when the system is in use. Blinking Blue: Connecting SECTION 1: GETTING STARTED AND CHARGING COMPONENTS 1. Remove REAL Immersive System case from the shipping container. Solid Blue: Connected 4. Ensure the headset is connected to its power cord (USB-C cord). LED lights on top of headset will only show blinking green or solid green to indicate charging status.
Select “Connect” next to the desired network. iv. Enter the password into the corresponding fi eld. v. Select “Save”. vi. The REAL Immersive System should now be connected. 6. Click the button at the top left of the screen to return to the TherapyView home screen.
Page 7
8. Place small sensors onto bands by sliding them into elasticized loops. For 11. Once a patient is selected or created, the healthcare provider (HCP) may the hand sensor bands, tighten elasticized loop using the buckle. Place large initiate the session by pressing “Start Session.” sensor into pocket of shoulder band.
Headset is turned off and on using the power button. App should be relaunched on the tablet. Sensors are turned off and on by placing them in the powered charging station (while the REAL™ Immersive System is plugged in) and removing them again.
Immersive System Case Instructions: ™ 1. Remove sensors and bands. The REAL Immersive System is housed in a travel case that may be locked with the attached combination lock that secures the zipper. The combination lock should 2. Remove headset from patient’s head.
Settings for each activity will involve parameters such as turning on and off avatar features and environmental factors. While using the REAL Immersive System, the HCP remains responsible for the patient’s safety and the appropriateness of individual exercises including range of motion (ROM) attempted and any other limb or joint limitations unique to that patient.
Page 11
Therapy Activity 3: Sunrise Sub-Activity 2: Harvest The Harvest sub-activity involves growing a variety of vegetables by raising and lowering one’s arms a number of times in order to trigger the appearance of day- night cycles. This activity creates an incentive for the patient to do multiple repeti- tions of this exercise if called for by the patient’s rehabilitation plan.
Page 12
Therapy Activity 4: Bird Forest Therapy Activity 5: Penguin Sports Park The Bird Forest activity incorporates standard functional exercises including dynamic In these activities, the patient must move their upper extremities to intercept an reaching and pronation/supination into a virtual reality activity by requiring the patient object coming at them, in a time dependent manner.
*REAL Immersive System is calibrated appropriately to detect movement in virtual reality space in relation to real space accu- rately and precisely. Sensors will compute and display position at an accuracy of a 2 cm radius with respect to real space at a REAL Immersive System is intended for use in the electromagnetic environment specifi ed below.
Page 14
RF transmitters, an electromagnetic site survey should be considered. If the LTE Band 7 measured field strength in the location in which REAL Immersive System is used exceeds the applicable RF compliance 5240 5100-5800 WLAN 802.11...
Need help?
Do you have a question about the WTM and is the answer not in the manual?
Questions and answers