Related Manuals for Gigabyte R262-ZA2
Summarization of Contents
Hardware Installation
Installation Precautions
Safety and handling guidelines before installing server hardware components.
Product Specifications
Detailed technical specifications for the GIGABYTE R262-ZA1/ZA2 server.
System Block Diagram
Visual representation of the server's internal components and their connections.
System Appearance
Front View
Illustration and description of the server's front panel components.
Rear View
Illustration and description of the server's rear panel connectors and ports.
Front Panel LEDs and Buttons
Details on the function and status of front panel LEDs and buttons.
RoT LEDs
Explanation of Root of Trust (RoT) LED indicators on the front panel.
Rear System LAN LEDs
Status indicators for the rear system LAN ports.
Power Supply Unit (PSU) LED
Explanation of the LED indicators on the power supply unit.
Hard Disk Drive LEDs
Status indicators for the hard disk drives.
System Hardware Installation
Pre-installation Instructions
Essential safety and preparation steps before performing hardware installation.
Removing Chassis Cover
Step-by-step guide to remove the server's chassis cover.
Removing and Installing the Fan Duct
Procedures for removing and installing the system's fan duct.
Removing the Heat Sink
Steps to remove and reinstall the CPU heat sink assembly.
Installing the CPU
Detailed instructions for installing a CPU into the motherboard socket.
Installing the Memory
Guidelines and procedures for installing DDR4 memory modules.
DIMM Population Table
Table showing memory speed based on DIMM population and configuration.
Installing the PCI Expansion Card
Procedure for installing PCI expansion cards into the riser assembly.
Installing the Mezzanine Card
Instructions for installing OCP 3.0 and OCP 2.0 mezzanine cards.
Installing the Hard Disk Drive
Steps for installing 3.5" and 2.5" hard disk drives into the bays.
Installing the M.2 Device and Heat Sink
Guide for installing M.2 devices, including thermal pad placement.
Replacing the Fan Assembly
Procedure for replacing the system's fan assembly.
Replacing the Power Supply
Steps for replacing the server's power supply unit.
Cable Routing
Diagrams illustrating proper routing for internal system cables.
Motherboard Components
Motherboard Components Overview
Identification and description of major motherboard connectors and features.
Jumper Setting
Configuration options and settings for motherboard jumpers.
BIOS Setup
The Main Menu
Overview of the BIOS main menu and navigation controls.
Advanced Menu
Configuration options for various hardware components and system features.
Trusted Computing
Settings related to system security and trusted platform features.
PSP Firmware Versions
Displays basic PSP firmware version information.
Legacy Video Select
Option to select onboard or external VGA support.
AST2500 Super IO Configuration
Configuration for the AST2500 Super IO chip and serial port.
Serial Port Console Redirection
Settings for console redirection over serial or LAN.
CPU Configuration
Settings related to CPU features, virtualization, and information.
PCI Subsystem Settings
Configuration options for PCIe lanes, link speeds, and device settings.
USB Configuration
Settings for USB controller, legacy support, and device configurations.
Network Stack Configuration
Options for enabling and configuring the UEFI network stack.
NVMe Configuration
Displays NVMe devices connected to the system.
SATA Configuration
Displays information about installed SATA HDDs.
Graphic Output Configuration
Selects the output device type for graphics.
AMD Mem Configuration Status
Displays memory configuration status for CPU.
T1s Auth Configuration
Settings for server CA and client certificate configuration.
iSCSI Configuration
Configuration options for iSCSI initiator.
Intel(R) I350 Gigabit Network Connection
Configuration for the Intel I350 Gigabit Network Connection.
VLAN Configuration
Settings for configuring VLAN IDs and priorities.
MAC IPv4 Network Configuration
Configuration for IPv4 network settings.
MAC IPv6 Network Configuration
Configuration for IPv6 network settings.
AMD CBS Menu
Configuration options for AMD CPU-related features including Core, DF, UMC, NBIO, FCH, NTB, SOC.
CPU Common Options
Common configuration settings for the CPU, including performance and core features.
DF Common Options
Common configuration settings for the Data Fabric (DF), including scrubber and ACPI.
UMC Common Options
Common configuration settings for the Unified Memory Controller (UMC), including DDR4 and NVDIMM.
NBIO Common Options
Common configuration settings for the North Bridge I/O (IOMMU, PCIe ARI, SMU, AER).
FCH Common Options
Common configuration settings for the Southbridge (FCH), including AC Power Loss and RAS.
NTB Common Options
Common configuration settings for Non-Transparent Bridge (NTB) on sockets.
SOC Miscellaneous Control
Miscellaneous control settings for the System-on-Chip (SoC), including ABL features.
Workload Tuning
Settings for optimizing performance based on workload profiles.
AMD PBS Menu
Configuration options for AMD Platform Based Security (PBS), including RAS.
RAS
Reliability, Availability, and Serviceability settings for AMD PBS.
Chipset Setup Menu
Configuration options for the chipset and North Bridge, including PCIe compliance.
North Bridge
Configuration details for the North Bridge, including memory information.
Fabric Resource
Settings related to PCIe bus numbers in the fabric.
Server Management Menu
Settings for server management features like FRB-2, OS Watchdog, and BMC network.
System Event Log
Configuration and viewing of system event logs and EFI status codes.
View FRU Information
Displays basic system ID and product information (FRU).
BMC Network Configuration
Settings for the Baseboard Management Controller (BMC) network interface.
IPv6 BMC Network Configuration
Configuration for IPv6 BMC network settings.
Security Menu
Options for setting system access passwords and security features.
Secure Boot
Configuration and management of Secure Boot settings and keys.
Boot Menu
Settings for controlling system boot order and boot options.
Save & Exit Menu
Options to save BIOS changes, discard changes, or load defaults.
BIOS POST Beep Codes
Codes indicating system status during Power-On Self-Test (POST).
Need help?
Do you have a question about the R262-ZA2 and is the answer not in the manual?
Questions and answers