Parts Identification
Supply spindle
16 – 35mm
adjustable guide
rollers
Installation
When preparing the reader-printer for use with the UC7, use the operator's manual for
the specific reader-printer or scanner you are working on. Remove any carrier and lens
according to the operator's manual.
•
Turn off the main on/off switch and unplug the line cord from the wall outlet.
•
Remove the reader-printer lens and set aside.
•
Remove any other carrier that may be on the reader-printer by following the
instructions in the respective carrier's operator's manual.
Upper and
lower glass
flats
Fast rewind
3
Take up
spindle
Slow
Fast forward
Scan