Related Manuals for LINDR VK 30
Summary of Contents for LINDR VK 30
- Page 1 INSTRUCTION MANUAL LINDR MINI COMPRESSOR ENGLISH Number 013-2020 REV00 Valid 2020-06-01 VK 15, vk 30 MINI COMPRESSOR...
- Page 2 Read this manual carefully before installing and using the device. It contains important information necessary to ensure that all operations are done prop- erly and safely. This manual is a translation of the original Czech manual. LINDR.CZ s.r.o. Sadová 132 503 15 Nechanice, Czech Republic mobile: + 420 775 715 494 tel.:+420 495 447 239...
-
Page 3: Table Of Contents
Contents: Introduction ........Device description ........Machine plate .. -
Page 4: Introduction
WARNING: Children aged 15 or more and VK models allow smooth regulation of pres- persons with reduced physical, sensory or sure in 1.0-3.4 bar range (VK LINDR 15) and 1.0- mental capabilities or insufficient experience 4.2 bar range (VK LINDR 30). The set pressure is and knowledge may only use the device when displayed in bars on the pressure gauge. -
Page 5: Installation And Placement
bles) are damaged, they must be replaced by WARNING: Emergency maintenance and the manufacturer, their service technician or repair of the device must be done by trained, a similarly qualified person to prevent risk of authorised technicians familiar with cooling hazardous situations. -
Page 6: Device Description
9. DEVICE DESCRIPTION Air outlet Pressure gauge Switch Power cable Adjusting screw NOTE: The VK LINDR mini-compressor is primarily designed as an accessory for flow-through coolers and beverage keg pressurisation. -
Page 7: Connection And Pressurisation
3. F 5/8 x 9.5 mm speed fitting 4. F 5/8 x 8 mm speed fitting figure 10.2 Connection and Pressurisation by VK LINDR 30 Mini Compressor (Two-Tap Device) 1. Beverage inlet 5. Y 8 x 8 x 8 mm speed fitting 2. -
Page 8: How To Work With Speed Fittings
WARNING: Hoses must not be pressurised during removal. 12. AIR CONNECTION figure Connect the VK LINDR mini compressor to a keg coupler. Plug a 5/16” air hose into the speed fitting on the front of the com- pressor - Air outlet (1.). -
Page 9: Air Pressure Adjustment
WARNING: Use the device only as an accessory to flow-through coolers. Follow the safety instructions and do not overload the device. LINDR 15 for pressurising a single beverage line with maximum flow rate of 40 l/h. LINDR 30 for pressurising two beverage lines with maximum flow rate of 120 l/h. -
Page 10: Spare Parts
Ordering Components ALWAYS USE ORIGINAL COMPONENTS. The manufacturer or supplier bear no responsibility for non-original components or components not recommended by the manufacturer. 16. SPARE PARTS When ordering spare parts, always provide the following: • product type • production year •... -
Page 11: Technical Specifications
20. TECHNICAL SPECIFICATIONS Name LINDR 15 LINDR 30 Maximum output (l/hour) Voltage (V/ Hz~1) 220 – 240 V 50Hz~1 220 – 240 V 50Hz~1 Input power (W) Current (A) Frame dimensions (WxDxH mm) 150x240x250 150x240x250 Net weight (kg)
Need help?
Do you have a question about the VK 30 and is the answer not in the manual?
Questions and answers