Related Manuals for Smith Water 900
Summarization of Contents
10 Year Limited Warranty
Warranty Recipient
Details who the warranty applies to and its non-transferable nature.
Warranty Coverage Scope
Specifies what the limited warranty covers, including workmanship and materials.
Performance and Duration Terms
Outlines repair/replacement terms for parts and tanks/valves.
Exclusions and Limitations
Lists conditions not covered, such as abuse, improper installation, and consequential damages.
Warranty Claims Process
Provides instructions on how to report defects and contact the warrantor.
General Information
Owner's Reference Details
Section for recording appliance details like installation date, model, and serial number.
Safety Precautions
Recommended Installation Practices
Lists essential steps to follow during installation for safety and performance.
Prohibited Installation Practices
Lists actions to avoid during installation to prevent damage or malfunction.
Installation and Start-Up Procedures
Prepare Installation Area
Instructions for ensuring the installation site is clean and ready for the appliance.
Test Water Quality
Guidance on assessing water quality before installation.
Turn Off Water Supply
Steps to safely shut off water supply before connecting lines.
Connect Water Lines
Detailed instructions on connecting inlet/outlet water lines, including bypass valve use.
Connect Overflow and Drain Lines
How to connect overflow and drain lines to suitable receptors.
Flush Lines and Check for Leaks
Procedure to flush the system and identify any water leaks.
Connect Power and Configure Controller
Steps for connecting the power supply and initial controller setup.
Brine Cabinet Setup
Instructions for adding water and salt to the brine cabinet.
Final Installation Completion
Final steps to ensure the appliance is ready for use after setup.
Four-Button Controller Guide
Controller Button Functions
Explanation of the purpose and usage of each button (P, C, powerClean, R).
Controller Display and Indicators
Description of LCD display elements like Demand Mode, Delay Mode, and waterMizer.
Controller Setup
Determine Hardness Setting
Steps to find the correct water hardness setting for the controller.
Enter Setting Into Controller
Procedure for inputting the determined hardness setting into the controller.
Advanced Settings Configuration
Set Capacity Modes (HC/HE)
How to configure the appliance for High Capacity (HC) or High Efficiency (HE) modes.
Select Operating Mode
Instructions to select between Demand Mode and Delay Mode for regeneration.
Configure Regeneration Schedule
Setting hours until regeneration and preferred regeneration time.
Set Unit Preferences and Time
Choosing units (litres/gallons) and setting the current time.
Assembly and Parts Details
Cabinet and Lid Assemblies
Explains parts related to the appliance's outer casing and lid.
Internal Component Assemblies
Details various components of the appliance's cabinet and internal assemblies.
Injector Assembly Parts
Lists parts and descriptions for the injector assembly.
Bypass Valve Assembly
Components and diagram for the bypass valve assembly.
Optional I/O Adapter Assembly
Parts for the optional adapter assemblies with blending valves.
Top Fill Plug Assembly
Details of the top fill plug and its O-ring.
Drain End Cap Assembly
Components and description of the drain end cap assembly.
Drive End Cap Assembly
Lists parts and provides diagrams for the drive end cap assembly.
Brine Valve Housing Assembly
Explains parts and assembly of the brine valve housing.
Safety Shutoff Assembly
Components of the safety shutoff mechanism.
Troubleshooting Guide
No Soft Water Issues
Addresses lack of soft water after regeneration and general soft water problems.
Flow and Display Problems
Troubleshooting for no flow indication and display read-out issues.
Regeneration and Water Level Issues
Solutions for appliance stuck in regeneration or excess brine cabinet water.
Sequence, Salty Water, and Errors
Addresses regeneration sequence, salty water, and controller error messages.
Technical Specifications
Metric Specifications
Technical specifications for the water conditioners in metric units.
English Specifications
Technical specifications for the water conditioners in imperial units.
Need help?
Do you have a question about the 900 and is the answer not in the manual?
Questions and answers