Related Manuals for Rotek 800A
Summarization of Contents
General Information
Description of Series 800 Calibrators
Overview of the Series 800 calibrators, their functions, and capabilities.
Models and Options
Details on different Series 800 models (800A, 811A, 800AE, 811AE) and their features.
Technical Specifications
Detailed voltage and current output specifications for the calibrators.
Operating Instructions
Power Requirements and Installation
Information on voltage, frequency, fuse requirements, and installation of the calibrators.
Controls and Displays Overview
Description of front and rear panel controls, connections, and indicators.
General Operating Information
General operational procedures and considerations for using the calibrators.
Theory of Operation
Introduction to Series 800 Functions
Overview of the Series 800's voltage, current, and phase control mechanisms.
Voltage Output Generation
Explanation of the internal components and block diagram for AC voltage output.
Current Output Generation
Explanation of the components and block diagram for AC current output.
Phase Control Mechanism
Description of how phase control is achieved by measuring waveforms.
System Controls and Modes
Description of operating modes (Local, Remote) and control logic.
Maintenance and Troubleshooting
Required Test Equipment
List of essential equipment needed for calibrating and inspecting the Series 800.
Performance Tests
Procedures for verifying the calibrator's adherence to specifications.
Calibration Procedures
Detailed step-by-step instructions for calibrating the Series 800.
Periodic Maintenance
Recommended periodic maintenance tasks for reliability.
Troubleshooting Common Issues
Guidance on diagnosing and resolving common problems and malfunctions.
IEEE-488 Interface
Interface Description and Capabilities
Overview of the IEEE-488 interface and its communication capabilities.
Data Entry and Commands
Procedures for entering data and commands via the IEEE-488 interface.
Serial Polling and Status Monitoring
Procedure for reading status bytes using serial polling.
Programming Examples
Examples of programming instructions for controlling the Series 800 via IEEE-488.
Parts List
Recommended Spare Parts
A list of recommended spare parts for the Series 800 calibrator.
Replaceable Parts by Assembly
Lists manufacturers and replaceable parts by assembly.
Need help?
Do you have a question about the 800A and is the answer not in the manual?
Questions and answers