Advertisement
Advertisement
Table of Contents
Related Manuals for Stanley 56325
Summarization of Contents
Installation & Pairing
Unique Pairing Feature
Explains the unique pairing feature allowing control of multiple receivers from one transmitter.
Initiate Pairing Mode
Press and hold the receiver's power button for 5 seconds to activate pairing mode.
Complete Pairing Process
Press transmitter's ON then OFF buttons to finalize the pairing process.
Remove Paired Transmitters
Initiate Transmitter Removal
Press and hold the receiver's power button for 5 seconds to start removing paired transmitters.
Continue Transmitter Removal
Continue holding the receiver's power button for 5 more seconds while the LED flashes rapidly.
Confirm Transmitter Removal
Press the receiver's power button once to confirm the reset and remove all transmitters.
Installation
Receiver Installation Guidelines
Mount receiver at least 6 inches above ground, pointing outlets down, use GFCI outlet.
Operating Instructions
Manual Mode
Control power ON/OFF manually using the transmitter buttons.
Photocell Mode
Use transmitter's PHOTOCELL setting for automatic dawn/dusk operation.
Override Function
Manually override program by pressing receiver button; avoid holding to prevent pairing mode.
Product Specifications
Electrical Ratings
Details voltage, amperage, wattage for resistive and tungsten loads, and cord type.
Battery Information
Specifies the type of battery included (3V CR2032).
Resetting the Receiver
Remove All Paired Transmitters
Procedure to reset the receiver and remove all paired transmitters, referring back to step 1.
Need help?
Do you have a question about the 56325 and is the answer not in the manual?
Questions and answers