Related Manuals for gaviota 55 Series
Summarization of Contents
Emisores compatibles
Emisor 1 canal CROSS
Single-channel remote control for CROSS motors, used for awnings and shutters.
Emisor 15 canales CROSS
Fifteen-channel remote control for CROSS motors, allowing control of multiple devices.
Emisor pared 1 canal CROSS
Wall-mounted single-channel transmitter for CROSS motors, offering convenient control.
Emisor pared 15 canales CROSS
Wall-mounted fifteen-channel transmitter for CROSS motors, for multi-device control.
Reloj programador CROSS
Clocked transmitter for CROSS motors, enabling scheduled operation and control.
Emisor llavero CROSS
Keychain transmitter for CROSS motors, providing portable and compact remote control.
Central sol viento CROSS
Sun and wind sensor for CROSS motors, automating operation based on environmental conditions.
Programación finales de carrera
Paso 1: Corriente ON
Initial step to power the motor, indicated by a beep and movement, confirming power supply.
Paso 2: Reconocimiento del mando
Procedure to recognize the remote control and set the motor's rotation direction.
Paso 3: Entrada en programación
Entering the end-of-stroke programming mode using specific button presses.
Paso 3.1: Programación final de carrera bajada
Programming the lower end-of-stroke limit by moving the motor and using the stop button.
Paso 3.2: Programación final de carrera subida
Programming the upper end-of-stroke limit by moving the motor and using the stop button.
Programación parada intermedia
Paso 1: Memorizar parada intermedia
Setting an intermediate stop point by moving the motor and pressing the stop button twice.
Paso 1.2: Alcanzar parada intermedia
Procedure to reach the intermediate stop point by pressing and holding the stop button.
Borrado de la parada intermedia
Paso 1: Eliminar parada intermedia
Resetting the programmed intermediate stop point using a specific button sequence.
Copia de emisores
Paso 1: Programar nuevo emisor
Copying settings to a new remote control by pressing specific buttons on both remotes.
Borrado finales de carrera
Paso 1: Eliminar finales de carrera
Resetting all programmed end-of-stroke limits using a specific button sequence.
Borrado completo de la memoria
Paso 1: Reiniciar memoria del motor
Performing a full factory reset of the motor's memory via button sequence.
Need help?
Do you have a question about the 55 Series and is the answer not in the manual?
Questions and answers