SNOW WOLF QuattroPlow QP-114 Operation & Maintenance Manual
  1. Manuals
  2. Brands
  3. SNOW WOLF Manuals
  4. Snow Blower Accessories
  5. QuattroPlow QP-114
  6. Operation & maintenance manual

SNOW WOLF QuattroPlow QP-114 Operation & Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Operation & Maintenance Manual
QP Models 6,000 - 10,000 lb.
QPXT Models 10,000 - 15,000 lb.
QPHD Models 15,000 - 30,000 lb.
!
REMEMBER:
Register your product! No claims for warranty shall be considered unless your product
registration card is completed online within 30 days of purchase. Go to: snowwolfplows.com/registration.
QuattroPlow
™
05/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QuattroPlow QP-114 and is the answer not in the manual?

Questions and answers

Related Manuals for SNOW WOLF QuattroPlow QP-114

Summary of Contents for SNOW WOLF QuattroPlow QP-114

  • Page 1 Operation & Maintenance Manual QuattroPlow ™ QP Models 6,000 - 10,000 lb. QPXT Models 10,000 - 15,000 lb. QPHD Models 15,000 - 30,000 lb. REMEMBER: Register your product! No claims for warranty shall be considered unless your product registration card is completed online within 30 days of purchase. Go to: snowwolfplows.com/registration. 05/2020...
  • Page 2 MANUFACTURER'S WARRANTY Two-Year Limited Warranty SNOWWOLF International, hereinafter referred to as SNOWWOLF, warrants new SNOWWOLF SNOW PLOWS at the time of delivery to the original purchaser, to be free from defects in material and workmanship when properly set up and operated in accordance with the recommendations set forth by SNOWWOLF.

  • Page 3: Table Of Contents

    Introduction ............................5 Owner Information .............7 Serial Number Location .
  • Page 4 Wing Cutting Edge Upgrade Kit Installation ........34 Troubleshooting .
  • Page 5 Specifications ............................83 Attachment Specifications (QP Models) ........85 Dimensions (QP Models) .
  • Page 6 QuattroPlow Operation and Maintenance Manual...

  • Page 7: Introduction

    Introduction Owner Information ..............7 Serial Number Location .
  • Page 8 QuattroPlow Operation and Maintenance Manual...

  • Page 9: Owner Information

    Introduction Owner Information Serial Number Location Please record attachment information in the space Thank you for your decision to purchase a provided for future reference. SnowWolf QuattroPlow. To ensure maximum performance of your equipment, it is mandatory Model Number: that you thoroughly study the Operator’s Manual follow recommendations.

  • Page 10: Attachment Identification, Qp And Qpxt Models

    Attachment Identification, QP and QPXT Models HOSE HOLDER LEFT WING LH WING LH WING ANGLE REAR FRONT CYLINDER CUTTING CUTTING EDGE EDGE BLADE RIGHT WING CUTTING RH WING EDGE CYLINDER HYDRAULIC VALVE RH WING FRONT CUTTING EDGE BLADE TRIP MARKER SPRINGS GUIDE ATTACHMENT...

  • Page 11: Attachment Identification, Hd Models

    Introduction Attachment Identification, HD Models HOSE HOLDER LEFT WING LH WING LH WING REAR FRONT CUTTING CUTTING EDGE BLADE EDGE RIGHT CUTTING WING EDGE RH WING CYLINDER HYDRAULIC VALVE RH WING FRONT CUTTING EDGE BLADE MARKER GUIDE TRIP SPRINGS ATTACHMENT ANGLE MOUNTING FRAME CYLINDER...

  • Page 12: Qp Models Standard Items

    Introduction QP Models Standard Items QPXT Models Options • Trip Springs • QPXT-126, 9-FT Moldboard • Universal Skid Steer Compatible • QPXT-138, 10-FT Moldboard • UltraMAX HD Hydraulic Cylinder • QPXT-150, 11-FT Moldboard • Wear Shoes QP Models Options • Active Edge Cutting Edge •...

  • Page 13: Safety

    Safety Safety Information ............. . .13 Safe Operation Needs A Qualified Operator .
  • Page 14 QuattroPlow Operation and Maintenance Manual...

  • Page 15: Safety Information

    Safety Safety Information Safe Operation Needs A Qualified Operator Safety Alert Symbol This SAFETY ALERT SYMBOL identifies important safety messages AVOID SERIOUS INJURY OR DEATH equipment and in the owner’s manual. When you see this symbol, be alert to the Operators must receive instructions before possibility of personal injury and carefully operating the machine.

  • Page 16: Importance Of Safety

    Safety Importance of Safety • DO NOT modify the equipment in any way. Unauthorized modification may impair the function and / or safety and could affect the life Operating Safety of the equipment. • Read and follow instructions in this manual and •...
  • Page 17 Safety Importance of Safety Cont’d Hydraulic Safety • Always disconnect hydraulic connections Fire Prevention Safety between the machine and the QuattroPlow before performing maintenance • All fuels, most lubricants and some coolant QuattroPlow. mixtures are flammable. Flammable fluids that are leaking or spilled onto hot surfaces or onto •...
  • Page 18 QuattroPlow Operation and Maintenance Manual...

  • Page 19: Operation

    Operation General Information ............. .19 Pre-Operation Inspection .
  • Page 20 QuattroPlow Operation and Maintenance Manual...

  • Page 21: General Information

    Operation General Information Pre-Operation Inspection Before operating the QuattroPlow for the first time and each time thereafter, use the following list as a guideline during equipment inspection. Leaking fluids under pressure can enter the skin and cause serious injury or death. 1.

  • Page 22: Attachment Inspection

    Operation Attachment Inspection Monthly Inspection Daily Inspection • Inspect the QuattroPlow for cracks, bends, or NOTE: Inspect the attachment by performing a excessive wear. walk around daily before and after use. Use the following inspection checklist • Check wear shoes (if equipped) for wear. as a guideline.

  • Page 23: Attachment Installation

    Operation Attachment Installation Place all controls in neutral, engage the park brake, stop the engine and wait for all moving parts to stop. Leave the operator’s position. Connecting Attachment To The Machine See the machine’s Operator’s Manual for detailed information on operating the loader. Entering The Operator’s Position CRUSH HAZARD •...

  • Page 24: Hydraulic Couplers

    Operation Connecting Attachment To The Hydraulic Couplers Machine (Cont’d) • Thoroughly clean the quick couplers before making connections. Dirt can AVOID INJURY OR DEATH quickly damage the hydraulic system. Always shut off the machine’s engine and apply the parking brake before exiting the machine.

  • Page 25: Checking Quattroplow Operation

    Operation Hydraulic Couplers (Cont’d) Figure 1 It is the operator’s responsibility to know which machine control operates each function of the attachment prior to operating the attachment in the work area. Engage the machine’s auxiliary hydraulics. (See the machine’s Operation Manual for correct procedure).

  • Page 26: Operating The Attachment

    Operation Operating The NOTE: The machine speed is determined by the depth and density of the material Attachment being moved. NOTE: On extremely uneven ground, raise the Operation boom arms slightly, lower QuattroPlow to the ground using the tilt cylinders, then put the boom arms in the float position (if machine is equipped) to follow the contours of the ground.

  • Page 27: Attachment Removal

    Operation Attachment Removal NOTE: Put the QuattroPlow on planks or AVOID BURNS blocks before removing it from the machine to prevent it from settling or Hydraulic fluid, tubes, fittings and quick sinking in soft / wet ground. couplers can get hot during operation. Be careful when connecting and disconnecting Park the machine and attachment on a flat level hydraulic hoses.
  • Page 28 QuattroPlow Operation and Maintenance Manual...

  • Page 29: Maintenance

    Maintenance Maintenance Safety ............. .29 General Maintenance .
  • Page 30 QuattroPlow Operation and Maintenance Manual...

  • Page 31: Maintenance Safety

    Maintenance Safety • Disconnect the battery (both terminals) before welding on any part of the machine. Failure to do so may cause damage to electrical components. • When working around batteries, remember that all of the exposed metal parts are “live”. Never lay a metal object across the terminals AVOID SERIOUS INJURY OR DEATH because a spark, short circuit, explosion or...

  • Page 32: General Maintenance

    General Maintenance NOTE: After initial use, or repair/replacement of damaged parts, it is important to check the repaired or replaced parts for proper bolt torque, operation and leaks. AVOID SERIOUS INJURY OR DEATH Before operating or servicing system: Read and understand the machine’s owners manual.

  • Page 33: Quattroplow Maintenance

    QuattroPlow Lubrication Figure 1 Maintenance AVOID SERIOUS INJURY OR DEATH Always turn off and lockout power before servicing the attachment. Apply 3-4 pumps of grease to the QP wing hinge AVOID SERIOUS INJURY OR DEATH zerk (Item 1) [Figure 1] both sides every 40 Always disconnect hydraulic connections hours of operation.

  • Page 34: Cutting Edge Replacement

    Cutting Edge Replacement 8. Repeat procedure for the cutting edge (Item 3) [Figure 3]. NOTE: Replace or flip the bolt-on cutting edge 9. Properly dispose of the old cutting edge’s and when it wears within 1/2” - 3/4” of the install the new cutting edge’s by reversing the bolt head securing it to the trip-edge.

  • Page 35: Wear Shoe Adjustment / Replacement (If Equipped)

    Wear Shoe Adjustment / Figure 5 Replacement (if equipped) Place blocks under the QuattroPlow (both sides) to hold the wear shoe off the ground. Remove the retaining pin, spacers and remove the wear shoe. Install or remove spacers for desired blade clearance when installing wear shoe.

  • Page 36: Wing Cutting Edge Upgrade Kit Installation

    Wing Cutting Edge Upgrade Kit Figure 8 Installation AVOID SERIOUS INJURY OR DEATH Securely block up the attachment before working underneath. Figure 7 Install the cutting edge (Item 4) onto the wing (Item 6) [Figure 8]. Secure the cutting edge to the wing with three washers (Item 7) and three nuts (Item 8).

  • Page 37: Troubleshooting

    Troubleshooting PROBLEM CAUSE SOLUTION Replace main cutting edge / Cutting edge worn or damaged. wing cutting edges. QuattroPlow leaving snow Adjust machines lift and tilt Blade tilted too high. behind. controls. Raise or lower wear shoes as Wear shoes out of adjustment. needed.

  • Page 38: Storage And Return To Service

    Storage And Return To Service Storage Return to Service After the seasons use or when the QuattroPlow After the QuattroPlow has been in storage, it is will not be in use for a period of time, perform the necessary to follow a list of items to return the following steps.

  • Page 39: Parts

    Parts Models QP102, QP114, QP126, QP138 ......... . .40 Parts .
  • Page 40 QuattroPlow Operation and Maintenance Manual...
  • Page 41 Parts This page left intentionally blank QuattroPlow Operation and Maintenance Manual...

  • Page 42: Models Qp102, Qp114, Qp126, Qp138

    Parts Models QP102, QP114, QP126, QP138 Parts 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 43 Parts QP-102 QP-114 QP-126 QP-138 ITEM PART # DESCRIPTION P40084 BLADE ASSEMBLY, QP-102 P40096 BLADE ASSEMBLY, QP-114 P40108 BLADE ASSEMBLY, QP-126 P40120 BLADE ASSEMBLY, QP-138 BLADE WELDMENT ONLY, (NO SPRINGS P40015 OR TRIP EDGE) BLADE WELDMENT ONLY, (NO SPRINGS P40016 OR TRIP EDGE) BLADE WELDMENT ONLY, (NO SPRINGS P40017...
  • Page 44 Parts Models QP102, QP114, QP126, QP138 (Cont’d) Parts (Cont’d) 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 45 Parts QP-102 QP-114 QP-126 QP-138 ITEM PART # DESCRIPTION P60214 BOLT, HEX, 5/16-18 x 1-1/4”, ZINC, GR 5 P60215 BOLT, CARRIAGE, 5/16 x 2” ZINC, GR 5 P60159 HOSE CLAMP P60160 PLATE, HOSE CLAMP P60084 SPRING, HOSE HOLDER P60090 NUT, HEX, NYLOCK, 5/16”-18 BOLT, HEX, 5/16-18 x 2-1/2 ZINC PLATED, P60094 GR 5...

  • Page 46: Options (Qp Models)

    Parts Options (QP Models) QP-102 QP-114 QP-126 QP-138 ITEM PART # DESCRIPTION FRAME (OPTION) P50020 FLEX FRAME, ASSY, SEE PAGE 81 P50031 THREE-POINT FRAME P60000-1 A-FRAME MAIN EDGE - (See Trip Edges on page 50) Steel Options CENTER PUNCH CUTTING EDGE KIT, P50011-C 7’, WITH HARDWARE (GEN 1, 2 OR 3 TRIP EDGE)
  • Page 47 Parts QP-102 QP-114 QP-126 QP-138 ITEM PART # DESCRIPTION POLY WING EDGE KIT (P60050 - KIT) P40012 NUT, LOCK, 5/8-11, ZINC, GR C P60008 BOLT, CARRIAGE, 5/8-11 x 2-1/2” P60051 URETHANE CUTTING EDGE HOLD DOWN STRIP, OUTSIDE P60101 URETHANE EDGE CUTTING EDGE, URETHANE, REAR P60052 LEFT OR RIGHT...

  • Page 48: Side Wing (Qp Models)

    Parts Side Wing (QP Models) QuattroPlow Operation and Maintenance Manual...
  • Page 49 Parts ITEM PART # DESCRIPTION P38221 RUBBER-LOK TRIM 1/4” P40012 NUT, LOCK, 5/8-11, ZINC, GR C P50001 BLADE MARKER GUIDE SET P60024 NUT, LOCK, 1-8, ZINC, GR C P60052 CUTTING EDGE, URETHANE, REAR LEFT OR RIGHT P60057 PIN, WING CYLINDER D HANDLE (HITCH PIN), W/QUICK CLIP P20041 PIVOT BOLT, HEX, 1”- 8 x 7.5”...

  • Page 50: Hydraulics Qp102, Qp114, Qp126, Qp138

    Parts Hydraulics QP102, QP114, QP126, QP138 Hydraulic Hoses (QP Models) QP-102 QP-114 QP-126 QP-138 ITEM PART # DESCRIPTION P60072 HOSE, 3/8” x 58”, 3000 PSI, 6FJIC-6FJIC P60074 HOSE, 3/8” x 60”, 3000 PSI, 6FJIC-6FJIC P60076 HOSE, 3/8” x 66”, 3000 PSI, 6FJIC-6FJIC P60078 HOSE, 3/8”...

  • Page 51: Hydraulic Components (Qp Models)

    Parts Hydraulic Components (QP Models) AUTOWING MANIFOLD OPTION POWERWING MANIFOLD OPTION ITEM PART # DESCRIPTION P50006-B ANGLE CYLINDER, NITRO STEEL 2” ROD P60085 FITTING, ELBOW, 6MJIC - 6MORB (6801R-06-06-.07) P50009-A FITTING, #8 MJIC X #12 MORB P50010M COUPLER, 1/2” MALE FLAT FACE 1/2” BODY x 3/4” SAE PORT P50010F COUPLER,1/2”...

  • Page 52: Trip Edge Generations (Qp Models)

    Parts Trip Edge Generations (QP Models) TRIP EDGE MODEL IDENTIFYING DIMENSION 3.39 "3.39" EAR" 3.00 GENERATION 1 GENERATION 1 HOLE 5.00 3.50 2.86 "2.86" EAR" 3.00 HOLE GENERATION 2 GENERATION 2 4.00 3.50 3.00 3.00 6.75 "CENTER PUNCH" 3.00 GENERATION 3 *GENERATION 3 HOLE 3.75...

  • Page 53: Decal Identification (Qp Models)

    Parts Decal Identification (QP Models) QP-102 QP-114 QP-126 QP-138 PART # DESCRIPTION DC37 DECAL, QUATTROPLOW, QP-102 DC38 DECAL, QUATTROPLOW, QP-114 DC39 DECAL, QUATTROPLOW, QP-126 DC40 DECAL, QUATTROPLOW, QP-138 DC28 DECAL, SNOWWOLF, MOLDBOARD LEFT DC29 DECAL, WOLFHEAD, MOLDBOARD RIGHT DC36 DECAL, WOLFHEAD, LEFT SIDEPLATE DC58 DECAL, “PATENTS PENDING”...

  • Page 54: Models Qpxt126, Qpxt138, Qpxt150

    Parts Models QPXT126, QPXT138, QPXT150 Parts 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 55 Parts QPXT-126 QPXT-138 QPXT-150 ITEM PART # DESCRIPTION P40108XT BLADE ASSEMBLY, QPXT-126 P40120XT BLADE ASSEMBLY, QPXT-138 P40132XT BLADE ASSEMBLY, QPXT-150 BLADE WELDMENT ONLY, (NO SPRINGS P40017XT OR TRIP EDGE) BLADE WELDMENT ONLY, (NO SPRINGS P40018XT OR TRIP EDGE) BLADE WELDMENT ONLY, (NO SPRINGS P40019XT OR TRIP EDGE) P40026...
  • Page 56 Parts Models QPXT126, QP1XT138, QPXT150 (Cont’d) Parts (Cont’d) 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 57 Parts QPXT-126 QP-XT-138 QPXT-150 ITEM PART # DESCRIPTION P60089 MANIFOLD SHROUD BOLT SPACER P60090 NUT, HEX, NYLOCK, 5/16”-18 P60092 WASHER, FLAT, 5/16” SAE BOLT, HEX, 5/16-18 x 2-1/2 ZINC PLATED, P60094 GR 5 P60209 WASHER, FLAT, 1/2” USS, ZINC P60210 BOLT, HEX, 3/8”...

  • Page 58: Options (Qpxt Models)

    Parts Options (QPXT Models) QPXT-126 QPXT-138 QPXT-150 ITEM PART # DESCRIPTION MAIN EDGE Steel Options P50011-N CUTTING EDGE, KIT, 9’ P50011-O CUTTING EDGE, KIT, 10’ P50011-I CUTTING EDGE, KIT, 11’ ACTIVE EDGE P50011-N-REK 9’ ACTIVE EDGE KIT WITH HARDWARE P50011-O-REK 10’...
  • Page 59 Parts This page left intentionally blank QuattroPlow Operation and Maintenance Manual...

  • Page 60: Side Wing (Qpxt Models)

    Parts Side Wing (QPXT Models) QuattroPlow Operation and Maintenance Manual...
  • Page 61 Parts ITEM PART # DESCRIPTION P38221 RUBBER-LOK TRIM 1/4” P50001 BLADE MARKER GUIDE SET P60024 NUT, LOCK, 1-8, ZINC, GR C P60052 CUTTING EDGE, URETHANE, REAR LEFT OR RIGHT P60057 PIN, WING CYLINDER D HANDLE (HITCH PIN), W/QUICK CLIP P20041 PIVOT BOLT, HEX, 1”- 8 x 7.5”...

  • Page 62: Hydraulics Qpxt126, Qp1Xt138, Qpxt150

    Parts Hydraulics QPXT126, QP1XT138, QPXT150 Hydraulic Hoses (QPXT Models) QPXT-126 QPXT-138 QPXT-150 ITEM PART # DESCRIPTION P60076 HOSE, 3/8” x 66”, 3000 PSI, 6FJIC-6FJIC P60078 HOSE, 3/8” x 72”, 3000 PSI, 6FJIC-6FJIC P60080 HOSE, 3/8” x 78”, 3000 PSI, 6FJIC-6FJIC P60082 HOSE, 3/8”...

  • Page 63: Hydraulic Components (Qpxt Models)

    Parts Hydraulic Components (QPXT Models) AUTOWING MANIFOLD OPTION POWERWING MANIFOLD OPTION ITEM PART # DESCRIPTION P50006-B ANGLE CYLINDER, NITRO STEEL 2” ROD P60086 FITTING, ELBOW, 6MJIC - 6MORB (6801R-06-06-.07) P50009-A FITTING, #8 MJIC X #12 MORB P50010M COUPLER, 1/2” MALE FLAT FACE 1/2” BODY x 3/4” SAE PORT P50010F COUPLER,1/2”...

  • Page 64: Decal Identification (Qpxt Models)

    Parts Decal Identification (QPXT Models) QPXT-126 QPXT-138 QPXT-150 PART # DESCRIPTION DC96 DECAL, QUATTROPLOW, QPXT-126 DC97 DECAL, QUATTROPLOW, QPXT-138 DC98 DECAL, QUATTROPLOW, QPXT-150 DC28 DECAL, SNOWWOLF, MOLDBOARD LEFT DC29 DECAL, WOLFHEAD, MOLDBOARD RIGHT DC36 DECAL, WOLFHEAD, LEFT SIDEPLATE DC58 DECAL, “PATENTS PENDING” WHITE DC68 DECAL, TAG US, BLACK W/YELLOW P20019...
  • Page 65 Parts This page left intentionally blank QuattroPlow Operation and Maintenance Manual...

  • Page 66: Models Qphd146, Qphd170

    Parts Models QPHD146, QPHD170 Parts 12 13 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 67 Parts QPHD-146 QPHD-170 ITEM PART # DESCRIPTION P80074 MOLDBOARD ASSEMBLY 120” 10FT HD P80075 MOLDBOARD ASSEMBLY 144” 12FT HD P80100 MOLDBOARD ONLY, 120” 10FT HD P80101 MOLDBOARD ONLY, 144” 12FT HD P80080 SPRING ADJUSTER ASSEMBLY, HD P80081 WELDMENT, SPRING BAR, HD P40006 PIN, UPPER PIVOT/TRIP EDGE 1-3/16”...
  • Page 68 Parts Models QPHD146, QPHD170 (Cont’d) Parts (Cont’d) 12 13 1.10 QuattroPlow Operation and Maintenance Manual...
  • Page 69 Parts QPHD-146 QPHD-170 ITEM PART # DESCRIPTION P80087 A-FRAME, HD P60090 NUT, HEX, NYLOCK, 5/16”-18 P80003 PIN, LOWER PIVOT, 1.75” x 8.5” P60159 HOSE CLAMP P60160 PLATE, HOSE CLAMP P80017 BOLT, 5/8-11 x 2”, PLAIN FINISH, GR 8 P60009 NUT, HEX, 5/8-11, ZINC For items above 23: See “Options (QPHD Models)”...

  • Page 70: Options (Qphd Models)

    Parts Options (QPHD Models) QPHD-146 QPHD-170 ITEM PART # DESCRIPTION STANDARD BLADE P80011-A CUTTING EDGE, 10’ WITH HARDWARE P80011-B CUTTING EDGE, 12’ WITH HARDWARE MOUNT OPTIONS All Mounts P80088 NUT, HEX, NYLOCK, 1-1/2”-6 P80089 WASHER, FLAT, 1-1/2” MOUNTING KEEPER, WISHBONE, MOUNTING P80096 PLATE KEEPER CAT - IT (MT100 KIT)
  • Page 71 Parts This page left intentionally blank QuattroPlow Operation and Maintenance Manual...

  • Page 72: Side Wing (Qphd Models)

    Parts Side Wing (QPHD Models) QuattroPlow Operation and Maintenance Manual...
  • Page 73 Parts QPHD-146 QPHD-170 ITEM PART # DESCRIPTION P50001 BLADE MARKER GUIDE SET P80083 WING, QUATTRO PLOW HD, RH P80085 WING, QUATTRO PLOW HD, LH P50004 PIN, RAM ANCHOR (BLADE END) 1” x 6’ P40007 PIN, COTTER, 1/4” x 2”, ZINC P80039 BOLT, HEX, 3/4-10 x 2-1/2”, ZINC, GR 8 P80097...

  • Page 74: Hydraulics Qphd146, Qphd170

    Parts Hydraulics QPHD146, QPHD170 Hydraulic Hoses (QPHD Models) QPHD-146 QPHD-170 ITEM PART # DESCRIPTION P50008 HOSE, 3/8” x 78”, 3000 PSI, 6FJIC-8FJIC P50008-D HOSE, 3/8” x 94”, 3000 PSI, 6FJIC-8FJIC P60082 HOSE, 3/8” x 38”, 3000 PSI, 6FJIC-6FJIC QuattroPlow Operation and Maintenance Manual...

  • Page 75: Hydraulic Components (Qphd Models)

    Parts Hydraulic Components (QPHD Models) AUTOWING MANIFOLD OPTION POWERWING MANIFOLD OPTION ITEM PART # DESCRIPTION P80006-1 ANGLE CYLINDER, NITRO STEEL 3” BORE, DOUBLE ACTING P60085 FITTING, 90 DEG, #6MORB-#6MJIC P50009-A FITTING, #8 MJIC X #12 MORB P50010F COUPLER,1/2” FEMALE FLAT FACE 1/2” BODY x 3/4” SAE PORT P50010M COUPLER, 1/2”...

  • Page 76: Decal Identification (Qphd Models)

    Parts Decal Identification (QPHD Models) QPHD-146 QPHD-170 PART # DESCRIPTION DC72 DECAL, QUATTROPLOW, HD-146 DC73 DECAL, QUATTROPLOW, HD-170 DC74 DECAL, WING, QPHD DC75 DECAL, WING, QPHD DC77 DECAL, “PATENTS PENDING” BLACK DC79 DECAL, WOLFHEAD, LARGE, LEFT SIDE, QPHD DC28 DECAL, SNOWWOLF, MOLDBOARD LEFT DC29 DECAL, WOLFHEAD, MOLDBOARD RIGHT DC68...

  • Page 77: Options (Model Specific)

    Parts Options (Model Specific) Hydraulic Manifold AutoWing (QP and QPXT Models) ITEM PART # DESCRIPTION P60068-K MANIFOLD, AUTOWING W/VALVES (with Fittings) P60068 MANIFOLD, AUTOWING ASSEMBLY, W/VALVES (no fittings) P60128 CROSS OVER RELIEF VALVE, 2750 PSI P60126 WING CONTROL VALVE, 2250 PSI P60067 SLIDING RESTRICTOR, .062 P60069...

  • Page 78: Hydraulic Manifold Powerwing, Qp-Pw (Qp And Qpxt Models)

    Parts Hydraulic Manifold PowerWing, QP-PW (QP and QPXT Models) ITEM PART # DESCRIPTION QP-PW POWERWING MANIFOLD & DIODE HARNESS (with fittings) P60103 HARNESS, DIODE, QUATTRO POWER P60093 MANIFOLD, ASSEMBLY W/VALVES (no fittings) P60085 FITTING, 90 DEG, #6MORB-#6MJIC P38136 FITTING, 6400-06-06-.035 06MORB/06MJIC (RESTRICTED) P60069 FITTING, STR, #6MORB-#6MJIC P60129...

  • Page 79: Hydraulic Manifold Autowing (Hd Models)

    Parts Hydraulic Manifold AutoWing (HD Models) ITEM PART # DESCRIPTION P80051-K MANIFOLD, AUTOWING ASSEMBLY, HD W/VALVES (with fittings) P80051 MANIFOLD, AUTOWING, W/VALVES (no fittings) P60128 CROSS OVER RELIEF VALVE, 2750 PSI P60126 WING CONTROL VALVE, 2250 PSI P10130 SLIDING RESTRICTOR, .093 P60069 FITTING, #6MORB - #6MJIC, STRAIGHT P38078...

  • Page 80: Power Wing Upgrade Qphd-Pw (Hd Models)

    Parts Power Wing Upgrade QPHD-PW (HD Models) ITEM PART # DESCRIPTION P80057-K MANIFOLD, POWERWING ASSEMBLY W/VALVES (with fittings) MFJC CONTROLLER, MULTI-FUNCTION P80057 MANIFOLD, W/VALVES (no fittings) P60125 VALVE, SOLENIOID, (for wings only) P60124 VALVE, SOLENIOID, (for angle only) P30033 E-COIL, 12 VDC P10130 SLIDING RESTRICTOR, .093 P60069...

  • Page 81: Active Edge, 18" Sectional Blade (Qp And Qpxt Models)

    Parts Active Edge, 18” Sectional Blade (QP and QPXT Models) ITEM PART # DESCRIPTION P40012 NUT, LOCK, 5/8-11, ZINC P50011-18-SEC BLADE, 18” P60008 BOLT, CARRIAGE, 5/8-11 x 2-1/2” P60255 RETAINING WELDMENT, 18” P60253 BUSHING, STANOFF P60254 SPRING, RUBBER P60251-K KIT, 18” SECTION (kit includes items 1, 2, 3, 4, 5, & 6) QuattroPlow Operation and Maintenance Manual...

  • Page 82: Active Edge, 24" Sectional Blade (Qp And Qpxt Models)

    Parts Active Edge, 24” Sectional Blade (QP and QPXT Models) ITEM PART # DESCRIPTION P40012 NUT, LOCK, 5/8-11, ZINC P50011-24-SEC BLADE, 24” P60008 BOLT, CARRIAGE, 5/8-11 x 2-1/2” P60252 RETAINING WELDMENT, 24” P60253 BUSHING, STANOFF P60254 SPRING, RUBBER P60250-K KIT, 24” SECTION (kit includes items 1, 2, 3, 4, 5, & 6) QuattroPlow Operation and Maintenance Manual...

  • Page 83: Flex Frame

    Parts Flex Frame NOTE: The Flex Fame is standard on QPXT models and optional on QP models. ITEM PART # DESCRIPTION P20042 INSERT RUBBER, FOR T-FRAME, (8.00” LONG) P40012 NUT, LOCK 5/8-11, ZINC, GRADE C P50027 FLEX FRAME, A-FRAME WELDMENT, BLACK P50028 FLEX FRAME MOUNT PLATE P50029...
  • Page 84 QuattroPlow Operation and Maintenance Manual...

  • Page 85: Specifications

    Specifications Attachment Specifications (QP Models) ......... . .85 Dimensions (QP Models) .
  • Page 86 QuattroPlow Operation and Maintenance Manual...

  • Page 87: Attachment Specifications (Qp Models)

    Specifications Attachment Specifications (QP Models) FOR MACHINES WEIGHING 6,000 TO 10,000 LBS. DESCRIPTION QP-102 QP-114 QP-126 QP-138 Blade Width 7.0’ 8.0’ 9.0’ 10.0’ 106” (8’ 10”) 116” (9’ 8”) 126” (10’ 6”) 136” (11’ 4”) Clearing Width at Wide Angle (A) 30.7”...

  • Page 88: Dimensions (Qp Models)

    Specifications Dimensions (QP Models) DESCRIPTION QP-102 QP-114 QP-126 QP-138 Blade Width (A) 7.0’ 8.0’ 9.0’ 10.0’ Width In Pusher Position (B) 102” (8’ 6”) 114” (9’ 6”) 126” (10’ 6”) 138” (11’ 6”) Maximum Width (C) 130” (10’ 10”) 142” (11’ 10”) 154”...

  • Page 89: Attachment Specifications (Qpxt Models)

    Specifications Attachment Specifications (QPXT Models) FOR MACHINES WEIGHING 10,000 TO 15,000 LBS. DESCRIPTION QPXT-126 QPXT-138 QPXT-150 Blade Width 9.0’ 10.0’ 11.0’ 126” (10’ 6”) 136” (11’ 4”) 146” (12’ 2”) Clearing Width at Wide Angle (A) 30.7” 30.7” 30.7” Blade Height 1,464 1,540 1,575...

  • Page 90: Dimensions (Qpxt Models)

    Specifications Dimensions (QPXT Models) DESCRIPTION QPXT-126 QPXT-138 QPXT-150 Blade Width (A) 9.0’ 10.0’ 11.0’ Width In Pusher Position (B) 126” (10’ 6”) 138” (11’ 6”) 150” (12’ 6”) Maximum Width (C) 154” (12’ 10”) 166” (13’ 10”) 178” (14’ 10”) Width In Backdrag Position (D) 126”...

  • Page 91: Attachment Specifications (Qphd Models)

    Specifications Attachment Specifications (QPHD Models) FOR MACHINES WEIGHING 15,000 TO 30,000 LBS. DESCRIPTION QPHD-146 QPHD-170 Blade Width 10.0’ 12.0’ 144” (12’) 164” (13’ 8”) Clearing Width at Wide Angle (A) 38” 38” Blade Height 2,995 3,385 Weight (lbs.) 10 ga. 10 ga.

  • Page 92: Dimensions (Qphd Models)

    Specifications Dimensions (QPHD Models) 39.24 DESCRIPTION QPHD-146 QPHD-170 Blade Width (A) 10’ 12’ Width In Pusher Position (B) 146” (12’ 2”) 170” (14’ 2”) Maximum Width (C) 176” (14’ 8”) 200” (16’ 8”) Width In Backdrag Position (D) 146” (12’ 2”) 170”...

  • Page 93: Torque Specifications

    Specifications Torque Specifications Standard Hardware And Lock Nuts BOLT SAE GRADE 5 SAE GRADE 8 LOCK NUTS TYPE Nominal Plated or Plated W / Plated or Plated W / Plated or Plated W / Size Unplated ZnCr Unplated ZnCr Unplated ZnCr W / Grade W / Grade...
  • Page 94 QuattroPlow Operation and Maintenance Manual...
  • Page 96 14311 Ewing Avenue, Burnsville, MN 55306 1-800-905-2265 snowwolfplows.com © 2020 SnowWolf...

Table of Contents