Advertisement
Quick Links
Advertisement
Related Manuals for Fleurco GEMINI NGST60-40 Series
Summarization of Contents
General Information and Care
General Instructions
Read this manual carefully and completely before proceeding with installation.
Installation Over Ceramic Tiles
Guidance for installing the shower door over ceramic tiles, ensuring proper sealing.
Care for Your Shower Door
Instructions on how to clean and maintain the shower door panels and parts.
Tools, Parts, and Configurations
Tools Required
List of necessary tools for the installation process.
Possible Configurations
Overview of different product configurations available for verification.
Parts Listing
Comprehensive list of all parts included in the shower door kit.
Gemini (6mm) Hardware Listing
Detailed list of hardware components for the Gemini (6mm) model.
Gemini Plus (10mm) Hardware Listing
Detailed list of hardware components for the Gemini Plus (10mm) model.
Shower Door Installation Steps
Detecting the S.R.T Side on the Glass
Instructions for identifying the treated side of the glass panels.
Cut the Length of the Threshold
Guidance on measuring and cutting the threshold to the correct length.
Temporarily Place the Threshold and Bottom Guide
Temporarily position the threshold and bottom guide onto the shower base.
Adjust the Bottom Guide on the Base
Instructions for adjusting the bottom guide for optimal shower performance.
Mark the Placement of the Threshold and Bottom Guide
Marking the precise locations for the threshold and bottom guide on the base.
Install the Threshold on the Location Marked Previously
Installing the threshold onto the previously marked positions on the shower base.
Drill and Silicone the Bottom Guide Placement
Drilling holes and applying silicone for the bottom guide's placement.
Install the Bottom Guide
Securing the bottom guide in its designated position.
Draw a Parallel Line Along the Base
Drawing a reference line on the base using the bottom guide as a center.
Draw a Line Along the Wall on Both Sides Using a Level
Using a level to draw vertical lines on both walls for alignment.
Mark the Placement Line for the Wall Mount Bracket
Marking the wall for the correct placement of wall mount brackets.
Place the Wall Mount Brackets and Mark Hole Location
Positioning wall mount brackets and marking drilling points.
Drill, Apply Silicone & Insert the Wall Plugs
Drilling holes, applying silicone, and inserting wall plugs for brackets.
Secure the Wall Mount Brackets to the Wall
Fastening the wall mount brackets securely to the wall.
Calculate the Length of the Running Rail
Calculating the required length for the running rail using the provided formula.
Add the Running Rail and Wall Mount Covers
Attaching the running rail and installing covers for the wall mount brackets.
Level the Running Rail and Adjust
Leveling the running rail using set screws for proper door movement.
Install the Bottom Door Gasket on the Interior Panel
Attaching the bottom door gasket to the interior glass panel.
Install the Rollers on the Interior Panel
Mounting the rollers onto the interior shower door panel.
Install the Towel Bar on the Interior Panel
Attaching the towel bar to the interior shower door panel.
Install the Interior Panel
Mounting the interior glass panel into the shower frame.
Install the Rollers on the Exterior Panel
Mounting the rollers onto the exterior shower door panel.
Install the Towel Bar on the Exterior Panel
Attaching the towel bar to the exterior shower door panel.
Install the Exterior Panel
Mounting the exterior glass panel into the shower frame.
Install the Anti-Jump on the Exterior Rollers
Installing anti-jump mechanisms on the exterior door rollers.
Install the Side Gasket on the Door Panels
Attaching the side gaskets to the door panels for sealing.
Adjust the Door Panels
Adjusting the door panels for proper alignment and smooth operation.
Install the Roller Caps
Fitting the caps onto the door rollers for a finished look.
Install the Threshold Anchors
Securing the threshold anchors to the shower base.
Cut the Threshold Gasket
Cutting the threshold gasket to fit the specific dimensions.
Install the Threshold Gaskets
Installing the gaskets onto the threshold for water sealing.
Seal the Shower Unit
Applying sealant around the shower unit for final waterproofing.
Need help?
Do you have a question about the GEMINI NGST60-40 Series and is the answer not in the manual?
Questions and answers