RC 40A ESC User Manual

Electric speed controller (esc) for brushless motors

Advertisement

RC Electric Parts' Electric Speed Controller (ESC) for
Thank you for using RC Electric Parts' ESC designed to meet your hobbies needs. As
you'll find the ESC's settings are programmable with lots of features. If you have any
issues with your product feel free to contact us at
be happy to help you!
01 Main Features
• The ESC uses a powerful high-performance microcontroller processer which
supports programmable settings to meet the user's needs.
• Supports high RPM motors
• Maintains a desired constant RPM
• Designed to reduce interference
• Starting speed can be set
• Throttle response is very quick, stable, and linear.
• Designed for fixed wing airplanes and helicopters.
• Low-voltage values can be set.
• Integrated SBEC provides high current efficiently with little heat loss
• Abnormal input voltage protection, low voltage protection, and cut's power when
lost signal
User Manual
Brushless Motors
RCElectricParts@gmail.com
and we'd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 40A ESC and is the answer not in the manual?

Questions and answers

Summarization of Contents

First Time Use
Throttle Range Calibration
Calibrates minimum and maximum throttle range for stable response.
Normal Start-up
Describes the standard procedure for starting the ESC and motor.
Programming Instructions
Programming via Transmitter
Step-by-step guide to programming the ESC using the transmitter.
Programming via Card
Instructions for programming the ESC using a separate programming card.
Programmable Settings
Throttle Range Calibration
Re-calibration of throttle range for optimal performance.
Brake Setting
Configures whether the motor brake is enabled or disabled.
Battery Type Configuration
Selects LiPo/Li-ion or NiMH/NiCad battery type for protection settings.
Battery Protection Levels
Sets low voltage cutoff levels (Low, Medium, High) for battery protection.
Factory Default Recovery
Resets all ESC settings to their original factory default values.
Motor Timing Adjustment
Adjusts motor timing for optimal performance based on motor type.
Start-up Acceleration
Configures throttle response delay for smooth or rapid motor start-up.
Helicopter Flight Modes
Selects specialized throttle response modes for helicopter use.
Motor Rotation Direction
Sets the direction of motor rotation (clockwise or counterclockwise).
PWM Frequency Selection
Chooses the Pulse Width Modulation frequency for motor control.
Low Voltage Protection Mode
Determines how the ESC reacts to low voltage: reduce power or hard cutoff.
ESC Protections
Start-up Protection
Protects against motor failure during start-up by cutting power.
Overheat Protection
Reduces output power or cuts off to prevent ESC damage from heat.
Loss of Throttle Signal
Manages motor output upon temporary or prolonged loss of throttle signal.
Low Voltage Protection
Prevents battery over-discharge by managing motor output.
Attention
General Safety Precautions
Important safety guidelines for ESC installation and operation.

Table of Contents

Save PDF