Related Manuals for Cosmed Quark SPIRO
Summarization of Contents
Getting Started with Quark System
Important Notices and Safety
Crucial safety information, including general warnings and contraindications for different tests.
Intended Use and Clinical Indications
Describes the device's purpose, clinical applications, and specific uses.
Environmental Conditions for Operation
Specifies required environmental parameters for optimal and safe device operation.
System Components Overview
Details the main unit, flowmeters (Turbine, PNT X9), and breathing valve.
System Accessories and Peripherals
Overview of masks, mouthpieces, filters, HR monitor, oximeter, and other accessories.
System Warm-Up Procedure
Explains the necessary warm-up times for the Quark unit before testing.
Quark System Installation and Setup
Pre-Installation Checks and Options
Verifies packing, identifies optional modules, and lists available accessories before installation.
Quark System Description
Provides an overview of the Quark system's components and their assembly.
Quark Unit Installation Steps
Details the installation of the Quark unit, including front and rear panel connections.
Gas Cylinder Setup and Connections
Procedures for connecting gas cylinders, regulators, and hoses to the Quark system.
Flowmeter, Valve, and PC Connections
Steps to assemble flowmeters and breathing valves, and connect the Quark unit to a computer.
Preparation for Exercise Testing
Guides on preparing the Quark, subject, masks, HR monitor, ECG, and mouthpiece for testing.
Subject and Mask Fitting Procedures
Ensures proper mask selection, fit, and sealing for accurate exercise testing.
HR Monitor and ECG Electrode Setup
Instructions for setting up the HR Monitor and ECG electrodes for physiological data acquisition.
Quark System Cleaning, Maintenance, and Safety
General System Maintenance Guidelines
Outlines general maintenance requirements and safety precautions for device upkeep.
Cleaning and Disinfection Protocols
Detailed procedures for cleaning and disinfecting various system components to ensure hygiene.
Component-Specific Cleaning Procedures
Cleaning and disinfection methods for specific test components like turbines, masks, and valves.
Disposable Item Handling and Disposal
Guidelines for the use and disposal of disposable items to prevent contamination.
Equipment Inspection and Servicing
Procedures for sampling line maintenance, equipment inspection, and fuse replacement.
Quark System Appendix and Technical Information
EMC Compliance and Guidance
Details electromagnetic compatibility guidance, declarations, and recommended separation distances.
Safety Standards and Technical Specifications
Details device safety classifications, compliance standards, and technical specifications.
References and Interpretative Data
Lists technical references, calculation methods, predicted values, and quality control messages.
Need help?
Do you have a question about the Quark SPIRO and is the answer not in the manual?
Questions and answers