Related Manuals for Titus UV
Summarization of Contents
Installation
Unpacking Instructions
Steps for inspecting and unpacking the unit upon arrival.
Assembly
Instructions for unit placement and securing casters.
Initial Start-Up
Notes on required leakage and filter performance tests post-installation.
Operation
Initial Start-Up
Connecting power and turning the unit on for initial operation.
Speed Adjustment
How to change fan speeds on High Flow (HF) and Low Flow (LF) units.
Filter Change Indicator
Understanding and adjusting the filter indicator light for maintenance.
Recirculation Mode
Details on the unit's 100% air recirculation mode and placement.
Modes of Operation
Partial Exhaust/Recirculation Mode
Instructions for configuring the unit for partial exhaust and recirculation.
Total Exhaust Mode (Negative Pressure)
Steps for setting up total exhaust for negative pressure isolation.
Achieving Negative Pressure
Guidelines for achieving and maintaining negative pressure as per CDC standards.
Maintenance & Service
Parts Identification
Diagrams identifying key components of the THRC unit for service.
Maintenance Procedures
Cleaning the Unit
Procedures for periodic and exterior cabinet cleaning of the unit.
Prefilter Replacement
Steps for replacing the pre-filter to maintain HEPA filter life.
Primary Filter Replacement
Guidelines and steps for HEPA filter replacement and maintenance.
Removal of the UV Light Assembly for the THRC UV
How to remove the UV light assembly for servicing THRC UV models.
Power Cord
Steps for replacing the unit's power cord.
On/Off Switch
Steps for replacing the unit's on/off switch.
Speed Control Switch
Steps for replacing the unit's speed control switch.
Capacitor
Steps for replacing the unit's motor capacitor.
Filter Change Indicator Light
Steps for replacing the filter change indicator light.
Motor Assembly Removal
Instructions for removing the unit's motor assembly.
Specialized Procedures
Relocating a Contaminated Unit
Procedures for moving a unit that may be contaminated, with safety notes.
Unit Decontamination
Guidelines for decontaminating the unit before service or relocation.
Phenolic Decontamination
A specific disinfection procedure using phenolic disinfectant for the unit.
Troubleshooting
Inoperative Air Flow
Steps to diagnose and resolve issues when the unit is not producing airflow.
Airflow Diagnostics
Low Air Flow
Steps to diagnose and resolve issues with reduced airflow.
High Air Flow
Steps to diagnose and resolve issues with excessive airflow.
Excessive Contamination
Steps to address issues related to excessive contamination.
Specifications
THRC High Flow
Technical specifications for the Titus THRC High Flow model.
THRC High Flow UV
Technical specifications for the Titus THRC High Flow UV model.
THRC Low Flow
Technical specifications for the Titus THRC Low Flow model.
THRC Low Flow UV
Technical specifications for the Titus THRC Low Flow UV model.
Replacement Parts
THRC High Flow
List of replacement parts for the THRC High Flow model.
THRC High Flow UV
List of replacement parts for the THRC High Flow UV model.
Replacement Parts (continued)
THRC Low Flow UV
List of replacement parts for the THRC Low Flow UV model.
Need help?
Do you have a question about the UV and is the answer not in the manual?
Questions and answers