Advertisement
Quick Links
295-Q-002
Effective 6-1-2020
HPSC, HPTC, LPTF
Double
Flapgate Airlock Valve
INSTALLATION, OPERATION &
MAINTENANCEINSTRUCTIONS
Read this manual carefully before installing, operating, or maintaining this equipment. Failure to do so could
result in serious injury or death.
Save this manual
HPSC/HPTC
LPTF
Your Source for Bulk Handling/Air Process Equipment
Wm. W. Meyer & Sons, Inc.
1700 Franklin Blvd. • Libertyville, Illinois 60048-4407 • 800-963-4458 • 847 918-0111 • Fax: 847-918-8183
sales@wmwmeyer.com · meyerindustrial.com · wmwmeyer.com
Advertisement
Related Manuals for Meyer F Series
Summarization of Contents
SECTION I SAFETY PRECAUTIONS
IMPORTANT SAFETY INFORMATION
Crucial safety guidelines and warnings for operating and maintaining the equipment.
HAZARD IDENTIFICATION
Identification and description of specific hazards associated with the valve's operation and design.
Isolating Energy with Vented Isolation Valve
Procedure for safely isolating energy sources on air-operated units to prevent accidental startup.
SAFETY LABELING
Information on the importance and placement of safety labels on the equipment.
SECTION II RECEIVING AND STORAGE
A. Receiving
Steps for checking equipment upon receipt from the manufacturer.
B. STORAGE
Guidelines for proper storage of the equipment to maintain its condition.
SECTION III PRODUCT DESCRIPTION
HPSC & HPTC (High Pressure)
Details for high-pressure models, including pressure and temperature ratings.
LPTF (Low Pressure)
Details for low-pressure models, including pressure and temperature ratings.
SECTION IV INSTALLATION
BASIC DOUBLE FLAPGATE AIRLOCK VALVE MOUNTING
Steps for mounting the Double Flapgate Airlock Valve to mating equipment.
PNEUMATICALLY OPERATED DOUBLE FLAPGATES
Installation procedures for pneumatic versions of the valve.
ELECTRO-MECHANICAL DOUBLE FLAPGATE INSTALLATION
Installation procedures for electro-mechanical versions of the valve.
SECTION V OPERATION/STARTUP
PNEUMATIC ACTUATION OPERATION
Operating procedures for pneumatic actuation systems.
ELECTRO-MECHANICAL ACTUATION STARTUP
Startup procedures for electro-mechanical actuation systems.
GRAVITY ACTUATION STARTUP
Startup procedures for gravity-actuated systems.
Need help?
Do you have a question about the F Series and is the answer not in the manual?
Questions and answers