Related Manuals for Polon-Alfa EKS-4001
Summary of Contents for Polon-Alfa EKS-4001
- Page 1 POLON 4000 INTERACTIVE FIRE DETECTION AND ALARM SYSTEM EKS-4001 MICROPROCESSOR-BASED ADDRESSABLE MONITORING AND CONTROLLING ELEMENT Installation and Maintenance Manual IK-E286-001E IIIB Edition...
- Page 2 Any nonconformity with the instructions contained in the manual may be harmful or may cause violation of the law in force POLON-ALFA bears no responsibility for any damage resulting from usage inconsistent with the manual. A waste product, unsuitable for further use, shall be passed to a waste electric and electronic equipment collection point.
-
Page 3: Technical Specifications
The EKS-4001 element is intended to operate in loop-shaped detection lines of the POLON 4000 system control panels as an input/output device with one controlling output and two monitoring inputs. -
Page 4: Safety Conditions
Any maintenance works or periodic inspections shall be executed by skilled personnel employed by companies authorised and trained by POLON-ALFA. Any repairs must be carried out by the manufacturer. POLON-ALFA bears no responsibility for the operation of any apparatus being repaired by unauthorised personnel. - Page 5 IK-E286-001E element indicates this condition with red flashes of the LED diode. The alarm reset in the control panel results in the relay contacts return to the initial position. It is possible to disable actuation of the monitoring and controlling element relays in the control panel in two ways: •...
-
Page 6: Installation
WAGO type screw driver (3.5 x 0.5 mm, cat. No. 210-258) that is available for purchase at POLON-ALFA). The wires connection should be done pursuantly to the descriptions on the connector. Wires screens should be twisted together and fasten with the screw with washer placed between the slots on the mounting plate. -
Page 7: Packing And Transportation
IK-E286-001E Note: The inspections must be executed with special care. It is obligatory to inform proper persons in the case of any trial actuation of executing devices. PACKING AND TRANSPORTATION The EKS-4001 monitoring and controlling elements are packed into individual packages and then put into bulk containers of 10 pcs. - Page 8 IK-E286-001E Fig. 2 1xEKS case dimensions...
- Page 9 IK-E286-001E Fig. 3 2xEKS case dimensions...
- Page 10 IK-E286-001E Fig. 4 4xEKS case dimensions...
- Page 11 IK-E286-001E Fig. 5 Exemplary diagram of EKS-4001 element (in 1xEKS case) connection in detection line Fig. 6 EKS case connection terminals view IK-E286-001/03.2009/05.2012...
Need help?
Do you have a question about the EKS-4001 and is the answer not in the manual?
Questions and answers