Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
LED
ENERGY
G
RATING
A joint government and in
dustry program
Legend Eco Touch VS LED
E ciency
Flow Rate
Head
Power
Noise
L/Wh
L/min
m
W
dBA
2.8
-
43.9
125
171
Energy consumption
415
kWh per year
To pump 50,000 litres/day
When tested in accordance with AS 5102.2.
Actual energy use and running costs will depend on how you use the appliance.
Compare models at www.energyrating.gov.au
Advertisement
Table of Contents
Related Manuals for Legend 90/350 LED
Summary of Contents for Legend 90/350 LED
- Page 1 INSTALLATION AND OPERATION MANUAL ENERGY RATING A joint government and in dustry program Legend Eco Touch VS LED E ciency Flow Rate Head Power Noise L/Wh L/min 43.9 Energy consumption kWh per year To pump 50,000 litres/day When tested in accordance with AS 5102.2.
-
Page 2: Table Of Contents
PLUMBING CONNECTION ..........................4 ELECTRICAL CONNECTION ..........................5 PUMP OPERATION ............................5 GENERAL START UP GUIDE ........................5 LEGEND LED SPECK ECO TOUCH VS LED PUMP OPERATION ............6 LEGEND LED SPECK VS PUMP CUSTOM SPEED SETTING ..............6 SERVICE AND MAINTENANCE ........................7 TROUBLESHOOTING ............................9 GENERAL PUMP TROUBLESHOOTING ......................9 LEGEND LED SPECK VS PUMP TROUBLESHOOTING ................9... -
Page 3: Introduction
1.0 INTRODUCTION Congratulations on your purchase of a Legend LED Speck Pool and Spa Pump. Please take a moment to read through the entire manual before installing your new pump. Your pump must be installed and operated as specified. 1.1 SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS –... -
Page 4: Technical Specifications
2.0 TECHNICAL SPECIFICATIONS Model Fasco Motor Rated Max/ Inlet Outlet Power AMPS Model Power Conn. Conn. Output (kg) Water (Watts) Head (Watts) Temp 90/230 LED 806452PTG-A13AC 1000 12/4 2850 90/350 LED 806452QTG-A30AC 1100 13/4 2850 90/400 LED 807252RTB-A11AC 1300 15/4 2850 90/500 LED 807252STB-A18AC... -
Page 5: Electrical Connection
5.0 ELECTRICAL CONNECTION Legend LED Speck Pool Pumps are suitable for connection to a nominal 240VAC 50hz power supply. The motor is equipped with a flexible cable and 3-pin plug. If a power outlet is not available within 2 meters of the pump, a 3-pin power point in a safe dry place will need to be provided by an electrician. -
Page 6: Legend Led Speck Eco Touch Vs Led Pump Operation
The Legend LED Speck VS Pump will automatically start at high speed for five (5) minutes to ensure it primes completely. The pump will take a short time to prime and then deliver at full rate. No further priming should be required. -
Page 7: Service And Maintenance
LCD DISPLAY SCREEN (DISPLAYS RPM) SET BUTTON FOR SET SPEED / ADJUSTABLE SPEED VARIABLE SPEED BUTTONS OFF BUTTON 7.0 SERVICE AND MAINTENANCE To achieve a maximum potential life expectancy from the pump, ensure the following steps are taken: I. Empty the strainer basket regularly. The regularity will vary from pool to pool, for example: a. - Page 8 d. Remove the strainer plastic basket and empty any contents. If a sock or filter has been fitted, inspect it for holes and replace if necessary. e. Inspect the chamber housing of the basket, ensure no debris, pebbles or leaves have fallen in whilst removing the basket, remove all foreign material.
-
Page 9: Troubleshooting
8.2 LEGEND LED SPECK VS PUMP TROUBLESHOOTING The Legend LED Speck VS Pump has an LED Error light on the control panel which flashes to indicate a warning. If the Error light is flashing, pay attention to the number of flashes between intervals then shut the pump down. -
Page 10: Warranty
This express warranty provided by Legend Products & Services is in addition to any other rights and remedies imposed by Applicable Laws that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any Applicable Laws which cannot be excluded, restricted or modified. -
Page 11: Exclusions
(or any part thereof) or the services supplied. The maximum liability incurred by Legend Products & Services shall not exceed in any case the contract price for the equipment or the product parts claimed to be defective. Further, Legend Products & Services shall not be liable for any loss, damage or delay directly or indirectly caused by any malfunction of or defect of or failure of the equipment other than as expressly stated in this warranty. -
Page 12: Warranty Claims
Any equipment requiring warranty repair (alleged) must be returned to the place of purchase and or nearest Legend Products approved stockist (prepaid), as soon as the purchaser becomes aware of any fault. Neither Legend Products & Services nor the approved Legend Products stockist shall be responsible for any goods damaged in transit.
Need help?
Do you have a question about the 90/350 LED and is the answer not in the manual?
Questions and answers