Page 1
500 l 500 l 500 l 700 l 1000 l Titanium anode (water heater is equipped with a magnesium anode as standard) Please read the instructions carefully before beginning the installation and use of the product. Made in Poland www.galmet.eu...
(squeezing, plugging) and its discharge end should be visible (in order to verify operation of the valve). 10. „Galmet Sp. z o. o.” Sp. K. reserves the right to introduce any modification without prior notification. 11. The heating coil should be flushed by the installer before the first use (besides, installing a filter is recommended to remove any impurities). If the heating coil is not used (e.g.
48-100 Głubczyce, Raciborska 36 declares that the following product: SGW(S) Maxi 250, SGW(S) Maxi 300, SGW(S) Maxi 400, SGW(S) Maxi 500, SGW(S) Maxi 700, SGW(S) Maxi 1000, SGW(S) Maxi Plus 300, SGW(S) Maxi Plus 300, SGW(S) Maxi Plus 300, SGW(S)M 300, SGW(S)M 300, SGW(S)M 300 Intended use: The water heaters are intended for heating and storage of the DHW.
Page 16
8. Guarantee terms and conditions The guarantor “Galmet Sp. z o. o.” Sp. K., with its registered office in Głubczyce, at ul. Raciborska 36, hereinafter referred to as the manufacturer guarantees that the product (hereinafter referred to as the equipment) covered by the hereby guarantee card is free from any defects in material and workmanship.
Page 17
19.11. damages arose as a result of fire, flood, lightning stroke, overvoltage in electrical installations w or any fortuitous events, 19.12. breakdowns resulting from use of non-original spare parts outside the offer of Galmet, such as heater, magnesium anode, titanium anode, thermostat, thermometer, gaskets etc.,...
Need help?
Do you have a question about the SGW(S) Maxi 700 and is the answer not in the manual?
Questions and answers