MEGA HIPPO Portamix Operation & Safety Instructions

MIXING M0TOR SPECIFICATIONS MIXING M0TOR SPECIFICATIONS
Model Number Model Number
Rated Voltage Rated Voltage
Power Input Power Input
Rated Current Rated Current
Frequency Frequency
Spindle Connection Spindle Connection
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
Safe work with the machine is only possible if you Safe work with the machine is only possible if you
ng
read this operating instruction completely and strictly read this operating instruction completely and strictly
follow the instructions. follow the instructions.
Disconnect the mixer from the power source when Disconnect the mixer from the power source when
servicing or cleaning the mixer. servicing or cleaning the mixer.
General safety instructions of the leaflet supplied General safety instructions of the leaflet supplied
with the tool must be observed. Prior to the first use, with the tool must be observed. Prior to the first use,
the user should familiarize themselves with the correct the user should familiarize themselves with the correct
operating procedures. operating procedures.
DO NOT put hands or foreign objects into the canister DO NOT put hands or foreign objects into the canister
whilst in operation or serious injury may result. Keep hands whilst in operation or serious injury may result. Keep hands
and other articles well clear of the mixing shaft and canister and other articles well clear of the mixing shaft and canister
when mixing. when mixing.
If the connecting cable is getting damaged or cut during If the connecting cable is getting damaged or cut during
the work, immediately disconnect from power source. the work, immediately disconnect from power source.
Never use the machine with damaged connecting cable. Never use the machine with damaged connecting cable.
Ensure Protection lid (Code PH718) is fitted correctly Ensure Protection lid (Code PH718) is fitted correctly
to prevent personal injury. to prevent personal injury.
Do not use the tool in an environment with danger Do not use the tool in an environment with danger
of explosion. of explosion.
Do not carry the tool at its cable, and always check Do not carry the tool at its cable, and always check
the tool, cable and plug before use. Repairs must be the tool, cable and plug before use. Repairs must be
carried out by certified service personnel. Only insert the carried out by certified service personnel. Only insert the
plug into the socket when the tool switch is off. plug into the socket when the tool switch is off.
CONTENTS Modifications of the tool are prohibited. Modifications of the tool are prohibited.
Unplug and switch the machine off if it is not being Unplug and switch the machine off if it is not being
Operating & safety instructions
used e.g. when attaching or removing the motor or used e.g. when attaching or removing the motor or
mixing paddle. mixing paddle.
Bedienings- en
veiligheidsinstructies
Käyttö- ja turvaohjeet
Instructions d'utilisation
et de sécurité
1
03 03
esult.
Hippo_1-76.indd 1
PH1816S (240V) PH1816S (240V)
PH1816S110 (110V) PH1816S110 (110V)
230V / 110V 230V / 110V
1800W / 1800W 1800W / 1800W
7.9A 7.9A
50 – 60Hz 50 – 60Hz
M16 M16
02
Betriebs- und
Sicherheitshinweise
Istruzioni per l'uso
12
e la sicurezza
22
Instrucciones de uso
y segurida
32
DANGER—SAFETY: Keep hands and other objects well clear of the mixing shaft and canister when mixer is in operation or serious injury could result. DANGER—SAFETY: Keep hands and other objects well clear of the mixing shaft and canister when mixer is in operation or serious injury could result.
Protection class Protection class
Degree of protection Degree of protection
Net weight Net weight
Interference suppression Interference suppression
Speed One Speed One
Speed Two Speed Two
Switch the motor off if power supply is disrupted to Switch the motor off if power supply is disrupted to
avoid unintentional start-up when power is turned on. avoid unintentional start-up when power is turned on.
Do not use the machine if one part of the housing Do not use the machine if one part of the housing
is damaged or in case of damages on the switch, is damaged or in case of damages on the switch,
cable or plug. cable or plug.
Machine operator must be in good physical condition Machine operator must be in good physical condition
and mental health and not under the influence of any and mental health and not under the influence of any
substance (drugs, alcohol) which might impair vision, substance (drugs, alcohol) which might impair vision,
dexterity or judgment. dexterity or judgment.
While working always lead the line cord and extension While working always lead the line cord and extension
cord to the back away from the machine. cord to the back away from the machine.
Electric tools have to be inspected visually Electric tools have to be inspected visually
by a specialist in regular intervals. by a specialist in regular intervals.
Do not touch rotating parts Do not touch rotating parts
During use, the user must wear goggles, During use, the user must wear goggles,
ear protectors and protective gloves. ear protectors and protective gloves.
Ensure the 2 casters with brakes are locked on while Ensure the 2 casters with brakes are locked on while
loading the mixing canister and during mixing operation. loading the mixing canister and during mixing operation.
Test the motor RCD for correct functionality Test the motor RCD for correct functionality
before starting work. before starting work.
It is recommended to connect the Portamix It is recommended to connect the Portamix
Mega Hippo to a power lead or power outlet fitted Mega Hippo to a power lead or power outlet fitted
with a RCD safety device. with a RCD safety device.
42
52
62
II II
IP20 IP20
6.9KG 6.9KG
EN 55014 and EN 61000 EN 55014 and EN 61000
Unloaded/Loaded Unloaded/Loaded
220/120RPM 220/120RPM
Unloaded/Loaded Unloaded/Loaded
670/410RPM 670/410RPM
Operating & Safety Instructions
20/8/2562 BE 10:39