Advertisement
Quick Links
Installation Manual
for Single Cartridge Systems
For all ESP, BREW, BEV, ICE, HF, DWS, SGP
High Flow Series Water Filtration Systems
Register your system and sign up for reminders at:
www.3m.com/FSfilterreminder
Note: Installer - please leave with owner/operator.
Water Filtration
Products
Advertisement
Related Manuals for 3M BREW
Summarization of Contents
Safety Information
Signal Word Consequences Explained
Explains the meaning of warning and notice signals used in the manual.
General Safety Warnings and Precautions
Covers critical warnings about water safety, substance reduction, and product handling.
Installation and Operation Precautions
Details precautions for installation, water pressure, and system use to prevent damage.
Installation Steps
Step 1: Unpacking and Parts Check
Remove system from package and verify all parts against the list.
Step 2: Select Installation Location
Choose a suitable location, allowing minimum space for cartridge changes.
Step 3: Select Fasteners and Tools
Choose appropriate fasteners and tools suitable for the installation site.
Step 4: Mark Mounting Surface
Draw a level line on the mounting surface for accurate system alignment.
Step 5: Mark Fastener Locations
Mark precise fastener positions using bracket holes or the bracket itself.
Step 6: Drill Holes for Fasteners
Drill holes for the selected fasteners at the marked locations.
Step 7: Set Fastener Protrusion
Ensure fasteners protrude 1/4"-3/8" (6-10 mm) from the surface for mounting.
Step 8: Install Head and Bracket
Attach the filter head and bracket onto the installed fasteners.
Step 9: Tighten Fasteners
Securely tighten all fasteners to ensure the system is firmly mounted.
Step 10: NH3 Head Installation
For NH3 heads, wrap threads with PTFE tape and install shut-off valve.
Step 11: Connect Piping
Install inlet and outlet piping using PTFE tape for leak prevention.
Step 12: Install Cartridge
Remove cap, install cartridge with a quarter turn, and flush it.
Step 13: System Flush and Leak Check
Turn on water, flush system to remove air/fines, and check for leaks.
Cartridge Replacement
Preventing Damage from Leaks
Follow instructions to prevent property damage from water leaks or flooding.
Recommended Cartridge Replacement Interval
Replace cartridges every 6-12 months or sooner if flow reduces.
Parts Identification
Parts Identification: Model Cross-Reference
Lists cartridge models, part numbers, and system compatibility for easy identification.
Parts Identification: Item Illustrations
Visual guide to identify specific part numbers and cartridge styles.
Warranty Information
Product Selection and Use Responsibilities
Outlines customer responsibility for selecting and using the product appropriately.
Limited Warranty Terms and Coverage
Details warranty period, coverage, exclusions, and customer remedies.
Limitation of Liability
Defines 3M's liability limitations regarding product use, loss, or damage.
Flushing Instructions
Flush Table by Cartridge Model
Provides specific flush volumes and times for each cartridge model before use.
NSF/ANSI Certification Information
Details NSF/ANSI testing and certification for contaminant reduction claims.
Need help?
Do you have a question about the BREW and is the answer not in the manual?
Questions and answers