PolyScience IP-60 Operator's Manual

PolyScience IP-60 Operator's Manual

Low temperature coolers

Advertisement

Operator's Manual
Low Temperature Coolers
Model FT-25
Models IP-35, IP-60
110-064
04.25.12
1.800.561.8187
information@itm.com
www.
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP-60 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction to Low Temperature Coolers
General Information and Safety
Covers general operational guidelines and important safety considerations for the equipment.
General Safety Information and Warnings
Details safety symbols and general precautions to prevent injury and equipment damage.
Key Safety Recommendations
Regulatory Compliance and Testing Standards
Outlines the regulatory standards and directives the equipment complies with.
Unpacking and Initial Inspection
Instructions for safely unpacking the cooler and checking for shipping damage.
Installation Guide
Electrical Power Requirements
Details on proper electrical connections, voltage, and extension cord usage for safe operation.
Immersion Probe Cooler Setup
Specific instructions for setting up and positioning the immersion probe for cooling applications.
Positioning Immersion Probe Assembly
Correct positioning of the immersion probe assembly to ensure optimal performance and prevent damage.
Flow Through Cooler Setup
Flow Through Cooler Tubing Connections
Detailed instructions and diagrams for making proper tubing connections for the FT cooler.
Normal Operation Procedures
Immersion Probe Cooler Operation
Specific operating instructions for Immersion Probe Coolers, including immersion and temperature checks.
Flow Through Cooler Operation
Instructions for operating the Flow Through Cooler, including setting temperature and checking circulation.
Routine Maintenance and Troubleshooting
Cleaning Exterior Surfaces
Instructions on how to clean the exterior surfaces of the low temperature cooler.
Cleaning Condenser Fins
Procedure for cleaning the refrigeration condenser fins to maintain optimal cooling capacity.
Draining Residual Oil from Immersion Probe
Procedure for draining residual oil from the immersion probe assembly to ensure efficiency.
Technical Information
Performance Specifications
Detailed performance data, including temperature range, cooling capacity, and dimensions for each model.

Table of Contents