Dss System Signal Splitting - RCA D940 User Manual

DSS Signal Splitting
®
OPTION 1. (Refer to above diagram)
1 . Hook up the DSS
receiver instructions.
2. Connect DSS Receiver to your TV1 with a cable from the A/V
OUTPUT on the DSS Receiver to the A/V INPUT on TV1.
3.Connect DSS Receiver to TV2 with a cable from OUT to TV
to an A/B switch at TV2.
OPTION 2.
1. Hook up the DSS
2. Use one of the following DSS System Signal Combiners to split the
"Out To TV" cable. (Refer to page 10)
DSS Model D2271 Two Way Signal Combiner
DSS Model D2471 Four Way Signal Combiner
3. Hook one of the "Out To TV" cable lines to the TV originally
hooked up to your DSS Receiver and the other to a second TV.
Receiver as directed in the DSS
®
Receiver as directed in the DSS Receiver instructions.
®
9