Advertisement
Quick Links
Advertisement
Related Manuals for Cabrinha FUSION CARBON
Summarization of Contents
General Safety Warnings and Cautions
Product Usage and Security
Read and understand warnings, cautions, and instructions for security and protection.
Age and Supervision Requirements
Users under 18 need parental/guardian supervision and guidance for product use.
Hazardous Sport Risks
Kiteboarding is hazardous; power kites and lines pose dangers. Seek professional instruction.
Safe Operating Environment
Fly in open areas, observe conditions, avoid obstacles, and stay within limits.
Recommended Kiteboarding Practices
Inherent Risks and Acceptance
Kiteboarding involves serious injury risk. Participation implies risk acceptance.
Equipment Inspection and Maintenance
Always inspect equipment for wear and tear. Stop use if damaged and repair/replace.
Situational Awareness and Safety
Avoid dangerous situations. Use reputable parts. Study conditions and familiarize yourself with locations.
Protective Gear and Companionship
Use protective gear, helmet, and sail with a buddy. Be aware of changing conditions.
Dangers from Kiteboard and Foil
Foilboarding Risk Assessment
Kite foilboarding is risky. Incorrect performance can cause serious injury or death.
Component Safety and Handling
Foil components can be sharp/hazardous. Handle with care during assembly and riding.
Pre-Use Information and Liability
Read product information, warnings, and assembly guides. No liability accepted for non-compliance.
Safe Riding and Equipment Care
Ride within limits, maintain control, be aware of surroundings, and use approved parts.
Foil Kit Installation and Assembly
Inventory and Component Check
Check inventory for Fusion Hybrid and Fusion Carbon kits, including masts and screws.
Attaching Foil to Board
Steps for attaching foil top plate to board tracks using T-nuts and screws.
Adjusting Foil Position
Position foil forward for more lift (nose up) or backward for less lift (nose down).
Mast, Rear Fuselage, and Wings Assembly
Fuselage Connection
Join rear fuselage with front wing fuselage using indexed fit and m6 screws.
Stabilizer Attachment
Attach stabilizer (rear wing) using m6 x 15mm screws and T30 Torx wrench.
Mast to Fuselage Connection
Slot mast into fuselage and tighten with 3 pcs m6 x 30mm screws.
Foil and Board Care Instructions
Hardware Installation Guidelines
Use recommended parts and hand tools for installation. Do not over-tighten screws.
Regular Inspection and Rinsing
Check for damage, rinse with fresh water after each use, and before storage.
Storage Recommendations
Store board and foil in bags to prevent wear, sun exposure, and scratches.
Impact Damage Warning
Direct impact with hard objects can damage components; such damage is not covered by warranty.
Need help?
Do you have a question about the FUSION CARBON and is the answer not in the manual?
Questions and answers