Related Manuals for Clearwater Spas Beachcraft Series
Summarization of Contents
INTRODUCTION
ICON Key
Defines information boxes and icons used throughout the manual for tips and warnings.
IMPORTANT SAFETY INSTRUCTIONS
Electrical Safety Warnings
Covers risks of electric shock, proper wiring, grounding, and appliance placement.
HEALTH AND USAGE SAFETY
Health and Usage Advisories
Advisories on water temperature, alcohol, medical conditions, and supervision for safe spa use.
SPA INSTALLATION: SITE PREPARATION
Site Preparation and Clearance
Guidance on selecting site, ensuring space, and considering obstacles for spa placement.
SPA INSTALLATION: SITE SELECTION AND PLACEMENT
Site Selection and Preparation
Advice on choosing a level surface and verifying site readiness before delivery.
Outdoor and Deck Installation
Instructions for outdoor/patio and deck installations, emphasizing load capacity.
SPA INSTALLATION: GROUND PREPARATION
Indoor Installation Considerations
Addressing moisture, flooring, drainage, and ventilation for indoor spa placement.
Ground Surface Options
Discusses suitable surfaces like concrete pads, crushed rock, and decks for spa installation.
ELECTRICAL HOOK-UP: 240V REQUIREMENTS
Removing Spa Panels
Step-by-step guide on how to access spa components by removing panels.
Wiring Checks and Precautions
Essential safety checks, high voltage awareness, and general wiring inspection guidelines.
ELECTRICAL WIRING AND RCD CHECKS
System Box Wire Gauge Specifications
Specifies required copper wire gauge for different service amperages (16A, 30A, 40A, 50A).
RCD Wiring and Service Disconnect
Details how to check RCD wiring and its importance for safety.
ELECTRICAL VOLTAGE AND SYSTEM CHECKS
Voltage Checks for 230V System
Procedures for checking voltage at RCD load out and system box for proper operation.
Peak Load Voltage Verification
Guidance on verifying voltage levels under peak load conditions for system stability.
ELECTRICAL WIRING SCHEMATIC
Wiring Diagram Overview
Illustrates the wiring path from the main breaker box through the RCD to the spa system.
ELECTRICAL SERVICE CONFIGURATION OPTIONS
Single Service Feed Configuration
Details wiring for a single-phase, 230VAC, 32A service.
Dual Service Feed Configurations
Explains wiring for dual-phase systems, specifying pump and heater connections.
ADVANCED ELECTRICAL CONFIGURATIONS
Dual Service Feed (Pump 1 on Line 2)
Describes a dual feed setup with Pump 1 on line 2 and Heater/Pump 2 on line 1.
Triple Service Feed Configuration
Outlines wiring for a 230V, 3-phase service, including neutral wire requirements.
FILLING YOUR SPA: FILTER CHAMBER
Water Testing and Preparation
Advises on testing water hardness and pH before filling for optimal spa life.
Filling via Filter Housing
Step-by-step instructions for filling the spa via the filter housing to prevent air locks.
TOPSIDE CONTROLS: TP600 OPERATION
TP600 Control Panel Overview
Introduces the TP600 control panel, showing 6-button and 5-button configurations.
Spa Start Up Procedure
Details the sequence from powering on, priming mode, to the heater engaging.
TP600 OPERATION AND FEATURES
Basic Operation and Navigation
Explains using temperature buttons, light button, and system menus.
Filtration and Temperature Modes
Covers filtration, Dual Temperature Ranges, and Ready/Rest modes.
TOPSIDE CONTROLS: TP950 & TP800
TP950 Control Panel
Shows the TP950 touchscreen control panel for the Resort Series.
TP800 Control Panel (2 & 3 Pumps)
Illustrates TP800 control panels for Beachcraft Series with different pump configurations.
TP950/TP800 SPA STATUS & NAVIGATION
Spa Status Screen Overview
How to view key information like temperature, time, and operation status on the main screen.
Menu Navigation and Shortcuts
Describes navigating menus and using shortcuts for detailed controls.
TP950/TP800 CONTROL PANEL NAVIGATION
Navigating Control Menus
Details using the 5 buttons to navigate, select, and edit settings on the control panel.
Spa Screen and Message Display
Covers accessing equipment, interpreting icons, and managing messages.
TP950/TP800 SPA SCREEN FUNCTIONS
Circulation Pump Operation
Explains the circulation pump's role and its indicator light when the heater is active.
One-Press Activation (Shortcut Screen)
Describes the shortcut screen for direct activation of spa functions via dedicated buttons.
SPA SETTINGS SCREEN
Accessing and Using Settings
How to navigate, select, and toggle settings like Temp Range, Heat Mode, and Invert Panel.
Dual Temperature Ranges Explained
Discusses High and Low temperature ranges, their settings, and freeze protection.
HEAT MODE: READY VS. REST
Understanding Ready Mode
Explains Ready Mode for maintaining set temperature, and issues in cold weather.
Understanding Rest Mode
Describes Rest Mode, which heats only during programmed filter cycles.
FILLING YOUR SPA VIA FILTER CHAMBER
Preparation and Filling Procedure
Instructions on opening valves and filling to prevent air locks in pumps.
Priming Mode Operation
Details the startup sequence, Priming Mode, and how pumps are energized.
SPA BEHAVIOR & FILTRATION
Pump Operation Modes Explained
Explains the three operating modes for the circulation pump.
Filtration and Ozone Cycles
Covers programmed filtration, ozone generator function, and purge cycles.
SPA SETTINGS & PROTECTION
Freeze Protection Mechanism
How the spa activates pumps and heater to prevent freeze damage.
Setting the Time-of-Day
Importance of setting time for filtration cycles and other features.
ADJUSTING FILTRATION SETTINGS
Main Filtration Cycle Setup
How to set the start time and duration for the primary filter cycle.
Optional Filter Cycle 2 Setup
Instructions for enabling and configuring a second filter cycle, including overlap.
ADDITIONAL SETTINGS & BUTTONS
Light Cycle Option Configuration
How to enable and configure the light timer feature if available.
Invert Panel and Dedicated Buttons
Explains Invert Panel function and how dedicated buttons operate spa equipment.
RESTRICTING & UNLOCKING OPERATION
Locking the Control Panel
How to prevent unwanted use by locking the panel or settings.
Unlocking the Control Panel
The sequence required to unlock the panel or settings after locking.
UTILITIES & PREFERENCES MENUS
Hold Mode and Utilities Menu
Using Hold Mode for service and navigating Utilities (A/B Temps, Fault Log).
System Preferences and Display Settings
Customizing display, reminders, cleanup duration, color, and language.
INFORMATION MENU DETAILS
System Information and Identification
Accessing system ID, model, setup, heater type, etc.
UTILITIES: GFCI TEST FEATURE
GFCI Test Procedure and Reset
Explains GFCI test for installation verification and how to reset it.
WATER PURITY & FILTRATION
Keeping Water Clean with Sanitizers
Importance of sterilization, ozone, chlorine, and bromine for water health.
Spa Chemistry 101 Basics
Principles of sanitizing, oxidizing, and maintaining pH balance.
CHEMICAL DEFINITIONS: SANITIZERS
Chlorine and Bromine Usage
Definitions and properties of chlorine and bromine as sanitizers.
CHEMICAL DEFINITIONS: OZONE & CONDITIONERS
Ozone Generator Functionality
Explains ozone's role as a sanitizer and oxidant, and its benefits.
Water Conditioners Explained
Definitions of flocculent, clarifier, scumballs, sequestering agents, etc.
USAGE DEFINITIONS & MAINTENANCE
Chemical Terminology Explained
Definitions of terms like PPM, Shock, Chlorination, Calcium Hardness, Water Balance.
Starting a Chemical Maintenance Program
Goal of maintaining water balance via chemicals and testing.
SPA WATER CARE & TESTING
Key Water Parameters to Track
Tracking pH, free chlorine, and alkalinity for optimal water chemistry.
Water Care Schedule and Recommendations
Table for testing frequency and chemical additions for spa water.
FILTRATION & FILTER REMOVAL
Filter Maintenance Recommendations
Advice on cleaning filters weekly/monthly for water flow and pump health.
Filter Removal Procedures
Step-by-step guides for removing single and double cartridge filters.
ADVANCED FILTRATION & OZONE
Microban Filter Technology
Information on new Microban filters with antimicrobial protection.
Ozone Generator Operation and Maintenance
Details on the ozonator's function, maintenance, and optional installation.
SALT SYSTEM: ISIS CONTROL PANEL
ISIS Controller User Interface
Explains the interface for the ISIS Automatic Bromine Generator, including Key Lockout.
Bromine Level Management Guide
Guidance on achieving and maintaining correct bromine level (3-5 PPM) using test strips.
GENESIS SYSTEM MAINTENANCE
Sodium Bromide Level Checks
How to periodically check Sodium Bromide levels and maintain the correct range.
Using Enzyme Clarifiers for Filters
Recommendations for enzyme clarifiers to keep filters clean and control buildup.
SALT SYSTEM: IN.CLEAR / GECKO PANEL
Setting the Maintenance Level
Steps to set the maintenance level for in.clear system to stabilize bromine levels.
Bromine Level Adjustment Guide
How to adjust maintenance level based on bromine readings and warnings.
DETERMINING BOOST LEVEL
Activating and Adjusting Boost Mode
How to use Boost Mode based on bather count and adjust levels for bromine stabilization.
TYPES OF JETS
Overview of Jet Types
Details different jet types, their adjustability, and removability for cleaning.
JET, AIR, & WATERFALL CONTROLS
Diverter Valves and Air Controls
How to use diverter valves for flow and air controls to enhance jet power.
Cleaning Rotating Jets
Instructions for cleaning rotating jets that have slowed or stopped spinning.
SPA MAINTENANCE PROCEDURES
Pillow and Cabinet Care
Instructions for cleaning spa pillows, cedar wood, and synthetic RIM cabinetry.
Shell and Spa Cover Maintenance
Guidance on cleaning the spa shell and maintaining the spa cover.
WINTERIZING PROCEDURES
Spa Winterizing Guidelines
Steps for draining the spa, protecting against freeze damage, and recommended winter settings.
DRAINING SPA: LOW PROFILE FLOOR
Low Profile Drain Operation
Step-by-step guide for locating and operating the drain on low profile floor models.
DRAINING SPA: HIGH PROFILE FLOOR
High Profile Drain Operation
Step-by-step guide for locating and operating the drain on high profile floor models.
ENERGY EFFICIENCY & TECHNOLOGY
E-Smart Technology Features
Highlights energy efficiency, CEC certification, recycling, and clean air factory processes.
TROUBLESHOOTING: SYSTEM ISSUES
System Trouble Diagnosis
Common system problems, causes, and remedies for GFCI trips and non-operation.
Control Response Troubleshooting
Solutions for overheating, poor response, and water not heating issues.
TROUBLESHOOTING: PUMPS & JETS
Pump Troubleshooting Guide
Remedies for noisy motors, non-functioning motors, and blown fuses.
Jets and Water Leak Issues
Solutions for rotating jets not rotating and water leaks from fittings.
TROUBLESHOOTING: WATER QUALITY
Cloudy, Green, and Brown Water
Addresses causes and remedies for cloudy, green, brown, and blue-green water.
Water Chemistry Problem Solutions
Solutions for bleached hair, bad smell, scale, and pH fluctuations.
FREQUENTLY ASKED QUESTIONS (FAQS)
Heating and Functionality FAQs
Answers questions on spa heating, temperature limits, and system operation.
Water Filling and Draining FAQs
Explains how to fill and drain the spa, referencing relevant sections.
LIMITED WARRANTY INFORMATION
Spa Structural Warranty
Covers spa shell, pillars, floor, and cabinet against water loss for 10 years.
Equipment Warranty Details
Covers plumbing and operating equipment against defects for 3 years.
Need help?
Do you have a question about the Beachcraft Series and is the answer not in the manual?
Questions and answers