The latest health and filtration technologies have been used effectively to purify and enhance your water. This durable AcalaQuell system will not only save you money but will also help you to make an active contribution to the environment. As you are buying fewer or no plastic botles, there is less waste and a reduced energy consumption.
Page 3
“living water” is created to suport you in your quest for health and well- being. Utilisingravity, the AcalaQuell offers an easy way in any place and at any time, to produce great-tasting water that will give you a lot of pleasure.
Page 4
1. Remove all packaging from the system and the filter. 2. Clean all the holders and parts of the system with a mild soap or cleaning agent - apart from the filters and the mineral rocks – and rinse them thoroughly with clean water. IMPORTANT: .
Page 5
5. The filter cartridge previously removed from the hygiene pack must be watered and vented before insertion. Place the filter cartridge in a container, with the thread upwards, so that there is at least 10 - 15 cm of water above the submerged cartridge. Leave the filter cartridge in the water for about 20 minutes.
Now your AcalaQuell is ready to go! ATTENTION: Keep an eye on the system when filtering the water. If the drinking water tank is more than half full, it can no longer absorb the water when the upper tank is completely filled.
In case of absences longer than 3 days, remove all the water from the system and store the filter cartridge and the lime filter of the AcalaQuell in a dark, cool place (above 5 degrees). They need to be moist and well-packed so that no germs get into the filter. In this way the filters will be spared.
The percolation time of the ceramic filter is between 30 and 60 minutes per litre, depending on the filling level and the condition of the filter. As the AcalaQuell only operates usingravity, other factor such as height above sea level, air pressure, the position of the sun and moon and water tension, as well as temperature, might have a minimal influence on the speed.
Page 10
Problem: Water is running out of the lime filter and then unfiltered into the storage tank or out of the water system. Cause: 1. Water has varying surface tensions. Due to the narrow design, a resistance can build upunderneath or inside the lime filter and the water does not flow through but over.
Page 11
5. After cleaning start using the AcalaQuell again and filter at least 6 litres a day. If you have further questions or something is not clear enough please do not hesitate to write us an email and we will answer you as soon as possible.
Need help?
Do you have a question about the Advanced and is the answer not in the manual?
Questions and answers