Table of Contents
Advertisement
Quick Links
Register at www.Toro.com.
Original Instructions (EN)
CV
48in, 52in, 60in, or 72in E-Z Vac
DFS Collection System
Z Master
®
G3 Mower
Model No. 78556—Serial No. 400000000 and Up
Model No. 78566—Serial No. 405700000 and Up
Model No. 78567—Serial No. 405700000 and Up
Form No. 3438-500 Rev A
™
*3438-500* A
Advertisement
Table of Contents
Related Manuals for Toro E-Z Vac DFS 78567
Summarization of Contents
Safety
Towing Safety
Guidelines for safely towing equipment attached to the Toro machine.
Setup
Loose Parts
Lists and describes the loose parts required for the setup procedures.
Preparing the Mower
Initial steps to prepare the mower for attachment installation.
Installing the Side Bumpers
Instructions for installing the left and right side bumpers.
Installing the Bagger Mounting Brackets
Steps to install the mounting brackets for the bagger assembly.
Installing the Handle Assembly and Bracket
Procedure for installing the handle assembly and bracket on 60- and 72-inch mowers.
Installing the Handle Assembly and Bracket for 48- and 52-inch Mowers
Steps to install the handle assembly and bracket on 48- and 52-inch mowers.
Installing the Bagger Assembly
Instructions for mounting and securing the bagger assembly.
Installing the Muffler Deflector
Procedure for installing the muffler deflector.
Routing the Blower Belt into the Blower Assembly
Guide on how to correctly route the blower belt.
Installing the Blower Assembly
Steps for installing the blower assembly onto the mower deck.
Installing the Discharge Tubes
Instructions for connecting the upper and lower discharge tubes.
Installing the Belt Cover
Procedure for installing the belt cover.
Installing the Weights
How to add counterweights for stability when using the bagger.
Installing the Bumpers
Instructions for installing bumpers on machines with MyRide suspension.
Adjusting the Parking Brake
Guidance on adjusting the mower's parking brake.
Checking the Tire Pressure
Instructions for checking and adjusting tire pressure.
Operation
Adjusting the Baffle
Instructions for adjusting the baffle for optimal bagging performance.
Emptying the Bagger
Step-by-step guide on how to safely empty the grass bagger.
Clearing Obstructions from the Collection System
Procedures for safely clearing blockages within the collection system.
Removing the Bagger
Instructions for safely removing the bagger assembly from the mower.
Using the Grass Deflector
Guidance on using the grass deflector for side-discharge mode.
Transporting Machines
Safety precautions when transporting the mower with the attachment.
Operating Tips
General advice on machine size, trimming, cutting height, speed, and grass conditions.
Maintenance
Recommended Maintenance Schedule(s)
Provides a schedule of maintenance tasks based on service intervals.
Cleaning the Bagger Screen
Step-by-step instructions for cleaning the bagger screen.
Cleaning the Collection System
Procedures for washing and drying the bagger hood, tube, and mower underside.
Inspecting the Blower Belt
Details how to inspect the blower belt for damage and wear.
Replacing the Blower Belt for 60- and 72-inch Mowers
Step-by-step guide for replacing the blower belt on specific mower sizes.
Replacing the Blower Belt for 48- and 52-inch Mowers
Step-by-step guide for replacing the blower belt on specific mower sizes.
Checking and Adjusting the Blower Latch
How to check and adjust the blower assembly latches for proper fit.
Greasing the Idler Arm and Handle Pivot
Instructions for greasing the idler arm and handle pivot according to the maintenance schedule.
Adjusting the Closed Door for 60- and 72-inch Mowers
Steps to adjust the closed door mechanism on 60- and 72-inch baggers.
Inspecting the Collection System
Procedure for inspecting all parts of the collection system for damage or wear.
Adjusting the Open Door for 60- and 72-inch Mowers
How to adjust the handle link to optimize the opening of the door on 60- and 72-inch baggers.
Adjusting the Latches for 60- and 72-inch Mowers
Steps to adjust the bagger latches for proper engagement on 60- and 72-inch models.
Adjusting the Arm Position for 48- and 52-inch Mowers
How to position the bellcrank arms equally on 48- and 52-inch bagger models.
Adjusting the Closed Door for 48- and 52-inch Mowers
How to adjust the closed door for proper fit and minimal rattling on 48- and 52-inch models.
Adjusting the Open Door for 48- and 52-inch Mowers
Procedure to adjust the door opening mechanism on 48- and 52-inch bagger models.
Adjusting the Hinge Stops
Steps to adjust hinge stops for proper door frame and hood alignment.
Inspecting the Mower Blades
How to regularly inspect mower blades for damage and wear.
Installing the Mower Blades
Information on selecting and installing the correct mower blades for bagging.
Installing the Grass Deflector
Instructions for installing the grass deflector to the mower.
Need help?
Do you have a question about the E-Z Vac DFS 78567 and is the answer not in the manual?
Questions and answers