All Modes Reset
After final QC step, we have to erase all saved changes again and restore the
factory defaults. You should do "All Mode Reset" again.
Power Off Monitor
Turn off the monitor by pressing "Power" button.
5.6 Firmware Upgrade Procedure
When you receive the returned monitor, please check whether the firmware version is
the latest. If not, please do the following procedures to upgrade it to the latest version.
1 Equipment Needed
- VG720/VG920 Monitor
- Fixture for Firmware Upgrade
- Power Adapter (P/N: 47.58201.001) *1 for Fixture
- VGA Cable (P/N: 42.59901.003) *1(Pin 4, 11 should be connected to GND)
- PC (Personal Computer)
- LPT Cable (P/N: 42.59906.001) *1
- Firmware Upgrade Program
- One additional monitor for checking the program execution
ViewSonic Corporation
- 31 –
Confidential - Do Not Copy
VG720