Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GreenTec HL 182
Summarization of Contents
Manual Usage and Definitions
Definitions and Warning Symbols
Explains warning symbols and terms used in the manual.
Machine Identification
Left/Right Hand Designation
Defines LH and RH terms for machine mounting.
Serial Number Plate
Details the information on the machine's serial number plate.
Safety
Intended Use and Prohibitions
Defines intended application and prohibits unauthorized modifications.
Personnel Qualification and Training
Specifies requirements for operators and maintenance staff.
General Safety Information
Outlines general safety rules and compliance.
Description
Cutterbar Component Overview
Identifies key components and plates on the cutterbar assembly.
Attachment and Removal Warnings
Unsecured Carrier Vehicle Warning
Warns about risks with an unsecured vehicle during work.
Running Machine Warning
Warns about injuries from moving machine parts.
Knife Coast-down Warning
Warns about injury from rotating knife after shutdown.
Hydraulic System Pressure Warning
Warns about injury from high-pressure hydraulic oil.
Sharp Knife Section Warning
Warns about cuts from sharp knife sections.
Delivery and Mounting
Delivery Inspection
Checks for damage and completeness of delivered items.
Machine Mounting Procedure
Steps for mounting the hedge trimmer onto tool frames.
Transport and Demounting
Transport Preparation
Guidelines for preparing the machine for transport.
Demounting Procedure
Steps for safely removing the hedge trimmer.
Storage and Transport Safety
Safe Storage Guidelines
Instructions for storing the hedge trimmer safely.
Driving with Mounted Trimmer
Safety guidelines for transporting the mounted machine.
Maintenance Safety
Carrier Vehicle Safety
Warns about risks with an unsecured vehicle during maintenance.
Knife Coast-down Safety
Warns about injury from rotating knife after shutdown.
Hydraulic System Pressure Safety
Warns about injury from high-pressure hydraulic oil.
Sharp Knife Section Safety
Warns about cuts from sharp knife sections during maintenance.
Maintenance Schedule and Tools
Maintenance Tasks Schedule
Schedule for cleaning, inspection, lubrication, and replacement.
Required Tools for Maintenance
Lists tools needed for maintenance tasks.
Cleaning and Inspection
Cleaning Procedure
Steps for cleaning the hedge trimmer after use.
Visual Inspection and Torque Checks
Guidelines for inspecting the machine and checking bolts.
Parts Replacement
Replacing Cutting Knife Sections
Steps to replace individual cutting sections.
Replacing Knife Teeth
Instructions for installing blade teeth.
Mounting Cutting Sections
Detailed steps for mounting new cutting sections.
Removing and Replacing Knives
Procedure for removing and installing the complete knife assembly.
Preparing New Knife for Mounting
Steps to prepare a new knife before installation.
Mounting the Knife Assembly
Instructions for installing the knife onto the cutterbar.
Replacing Cutterbar Guards
Steps for replacing damaged cutterbar guards.
Guard Removal and Mounting
Procedures for removing and mounting cutterbar guards.
Removing First Guard
Steps to remove the first guard.
Attaching First Guard and Replacing Safety Fingers
Attaching guards and replacing safety fingers.
Replacing Wear Plates
Steps to replace worn wear plates.
Replacing Knife Head and Bearing
Replacing knife head and mounting new knife head bearing.
Removing and Dismantling Knife Head Bearing
Procedure for removing and dismantling the knife head bearing.
Installing Knife Head Bearing and Mounting Knife Head
Installing head bearing and mounting knife head.
Checking Cutting Gap Parallelism
How to check and adjust the cutting gap for parallelism.
Lubrication and Parts Information
Lubrication Points and Procedure
Details the lubrication points and procedure.
Ordering Spare Parts and Lists
Information on purchasing spare parts and finding lists.
Disposal and Recycling
Packaging Disposal
Guidelines for recycling packaging materials.
Machine Decommissioning and Disposal
Advice on environmentally safe disposal of the machine.
Need help?
Do you have a question about the HL 182 and is the answer not in the manual?
Questions and answers