Table of Contents
Related Manuals for Whitehall S-110-S
Summarization of Contents
General Knowledge
OPERATOR SKILLS AND TRAINING
Operator skills and training requirements.
PATIENT EVALUATION
Patient suitability assessment for hydrotherapy.
INSPECTING THE WHIRLPOOL TUB AND TURBINE
Checklist for inspecting the whirlpool and turbine.
USING THE WHIRLPOOL
Device Intended Use
Defines the intended clinical purpose of Whitehall Whirlpool turbines.
Before Placing the Whirlpool Tub and Turbine Combination In Service
Operator requirements before putting the unit into service.
General Guidelines for Use
Provides general usage advice and precautions for operators.
Fixture Installation Location Guide
DIMENSION DESCRIPTION
Defines key dimensions for installation planning.
NOTES
Important notes on electrical and plumbing requirements.
Installation Instructions
ASSEMBLY PROCEDURE
Step-by-step guide for assembling the whirlpool unit.
OPERATION PROCEDURE
Step-by-step guide for operating the whirlpool.
DRAINING PROCEDURE
Instructions on how to drain the whirlpool.
Installation Instructions; -SDO Separate Drain Overflow
ASSEMBLY PROCEDURE
Assembly steps for SDO models.
OPERATION PROCEDURE
Operation steps for SDO models.
DRAINING PROCEDURE
Draining steps for SDO models.
Installation Instructions; Slant Back
ASSEMBLY PROCEDURE
Assembly steps for Slant Back models.
OPERATION PROCEDURE
Operation steps for Slant Back models.
DRAINING PROCEDURE
Draining steps for Slant Back models.
Stationary Repair Parts List
THESE REPLACEMENT TURBINES ARE USED FOR THE FOLLOWING MODEL NUMBERS:
Lists turbine compatibility by model number.
SPECIFY MODEL
Instruction to specify the model when ordering parts.
Motor Raising & Lowering Assembly
THESE REPAIR PARTS ARE USED FOR THE FOLLOWING MODEL NUMBERS ONLY:
Lists repair part compatibility by model number.
Cleaning and Disinfecting
Cleaning and Disinfecting the Whirlpool Tub
Procedures for cleaning and disinfecting the whirlpool tub.
Disinfecting and Cleaning of the Turbine
Procedures for cleaning and disinfecting the turbine.
Important (The following chemicals are NOT recommended)
Lists chemicals to avoid and reasons for avoidance.
Important (Using abrasive compounds or applicators)
Warning against using abrasive materials on the whirlpool.
Care and Cleaning
CARE AND CLEANING OF STAINLESS STEEL
Guidelines for cleaning stainless steel surfaces.
RECOMMENDED CLEANING MATERIALS
Lists recommended materials for cleaning.
RECOMMENDED CLEANING SOLUTIONS
Lists recommended cleaning solutions.
To remove smudges and fingerprints
Method for removing smudges and fingerprints.
To remove dirt and debris
Method for removing dirt and debris.
To remove rust stains
Method for removing rust stains.
FOR TOUGH PROBLEMS
Solutions for difficult cleaning issues.
FOR ENVIRO-GLAZE STAINLESS STEEL
Care instructions for Enviro-Glaze finish.
THINGS TO AVOID
Lists items and chemicals to avoid during cleaning.
Maintenance and Troubleshooting
Maintenance Schedule
Outlines recommended maintenance intervals.
Maintenance Procedures
Details specific maintenance tasks for the turbine.
Troubleshooting
Addresses common operational issues and solutions.
Motor Information
MOTOR DISASSEMBLY
Instructions for disassembling the motor.
MANUFACTURER'S WARRANTY
Mailing Address
Provides the company's mailing address.
Physical Address
Provides the company's physical address.
NOTICE TO KEEP ORIGINAL PACKAGING
Instructions regarding packaging for warranty claims.
Need help?
Do you have a question about the S-110-S and is the answer not in the manual?
Questions and answers