Table of Contents
Advertisement
Kransysteme
Operation Instructions
for
ABUS load indication system
LIS – SE
Factory No. _______________________
This document may not be reproduced or given to third parties and its content must not be divulged or used for other purposes without the prior written permission of ABUS. You will be liable to
pay compensation for any breach of this provision. All patent and registered design rights reserved.
These installation, operation and maintenance instructions are intended for use in an English–
speaking country by English–speaking specialist personnel.
AN 120076.000_EN
01.03.2016
Original operating manual
Advertisement
Table of Contents
Related Manuals for Abus 17787
Summarization of Contents
1 General
1.1 Brief Description of System
Provides an overview of the ABUS LIS-SE load indicator system and its features.
1.2 Use for the Intended Purpose
Details the intended applications and operational environment for the LIS-SE system.
1.3 Notes on warranty
Outlines ABUS warranty conditions and liability regarding product use and modifications.
2 Functions
2.1 Overload Shut-Down
Explains the system's functions for detecting and preventing overloads during hoist operations.
2.2 Part-Load Switch
Describes the function for setting an additional shut-down point below the rated load.
2.4 Load Population Recorder
Details the optional recorder for logging hoist operating conditions and evaluating service life.
2.4.1 FEM Groups
Explains the subdivision of cranes and hoists into groups based on FEM 9.511 for safety.
3 Components
3.1 LIS-SE Evaluation Unit
Details the primary evaluation unit, its terminals, and control signal inputs.
3.2 Current Measurement Module
Explains the selection criteria for the current measurement module based on motor current.
3.3 Load Indicator (Optional)
Covers the connection and function of optional ABUS load indicators (LAZ/GLZ).
4 Technical Data
4.1 Load Indicator SystemLIS-SE
Presents technical specifications and electrical data for the LIS-SE load indicator system.
4.2 LAZ / GLZ Load Indicator
Provides technical specifications for the LAZ and GLZ load indicator displays.
5 Operation
5.1 Digital Operator Terminal
Explains the operation and features of the integrated digital operator terminal (DBE).
5.2 Basic Settings
Describes factory settings and the process for fine-tuning adjustments using test loads.
5.3 Reading the Load Population Recorder
Details how to access and read stored data from the load population recorder.
6 Installation
6.1 Housing and wiring diagrams
Provides installation dimensions and refers to necessary wiring diagrams for the LIS-SE.
7 Malfunctions
7.1 Causes and Remedies
Lists common error codes displayed by the LIS-SE and their corresponding remedies.
7.2 Service
Provides contact information for the ABUS Service Centre for technical support.
Need help?
Do you have a question about the 17787 and is the answer not in the manual?
Questions and answers