Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for drago II Series
Summarization of Contents
MODEL IDENTIFICATION
LEGACY - 2001 to 2004
Identifies the first model with red frame and steel snouts.
SERIES I – 2005 to 2012
Details Series I changes like dark gray frame, poly snouts, and folding option.
SERIES II – 2013 to Current
Lists Series II changes including updated poly snouts and drive systems.
MAINTENANCE
REQUIRED FLUIDS
Lists lubricants, their locations, and capacities for maintenance.
LUBRICANT PART NUMBERS
Provides part numbers for specific lubricants.
PRE-SEASON
Details pre-season checks, adjustments, and lubrication tasks.
NORMAL OPERATION
Outlines maintenance for normal operation based on operating hours.
DOWN CORN
Lists daily and hourly maintenance specific to down corn conditions.
20-HOUR
Specifies maintenance for every 20 hours of operation.
50-HOUR
Details maintenance tasks required every 50 hours.
100-HOUR
Outlines maintenance tasks for every 100 hours.
250 HOUR OR YEARLY
Covers maintenance tasks for 250 hours or annually.
INITIAL SETTINGS
CORN HEAD ANGLE
Explains how to measure and set the corn head angle.
HEAD SPEED
Details how to determine correct feeder house speed for head speed.
SNOUT ADJUSTMENTS
Guides on proper snout positioning to avoid folding.
DECK PLATE GAP
Explains how to check and adjust deck plate gap using a tool.
DECK PLATE TENSION
Specifies how to measure deck plate piston bolt threads for tension.
GATHERING CHAIN TENSION
Describes how to check and adjust gathering chain tension.
PART REPLACEMENT
Stalk Roller Knives
How to identify worn stalk roller knives and replacement advice.
Gathering Chains
Criteria for replacing gathering chains based on stretch.
Deck Plates
Explains wear on deck plates and when to replace them.
Cross-Auger Drive Chain & Tensioner Roller
Identifies wear on tensioner rollers and chain replacement criteria.
PERFORMANCE PARTS
SNOUT WEAR POINTS
Explains standard vs. aggressive wear points for snouts.
AGGRESSIVE FEEDING BLOCKS
Describes aggressive feeding blocks and their function.
TROUBLESHOOTING
EXCESSIVE TRASH
Troubleshooting steps for excessive trash issues.
FEEDING
Troubleshooting flowcharts for feeding issues.
CHOPPING
Troubleshooting flowcharts for chopping issues.
SERVICE VIDEOS
SERVICE VIDEOS AT YOUR FINGERTIPS
Information on accessing Drago's service video library.
Need help?
Do you have a question about the II Series and is the answer not in the manual?
Questions and answers