Table of Contents
Advertisement
INSTALLING
Continued
103309
For Premium Models
It is very important to install the logs exactly as instructed. Do not modify logs.
Only use logs supplied with heater.
1. Place one-piece log set on grate to fit as illustrated in Figure 19. Make sure
middle section at bottom of log set is seated into "U"-shaped cutout in center of
chassis (see Figure 19). Log will fit securely on chassis.
sure log does not cover any burner parts.
2. Place lava rock around base of heater.
Chassis
Figure 19 - Installing Premium One-Piece Log Set
Burner
Figure 20 - Installing Premium One-Piece Log Set (Top View)
IMPORTANT:
Make
One Piece Log Set
Middle Section at
Bottom of Log Set
Burner
"U"-shaped Cutout
in Chassis
One Piece Log Set
21
Advertisement
Table of Contents
