If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be...
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro Technical Specifications de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Installation Parts Breakdown Model CE-CN-1534-S a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention 39581 regulations. Ensure a minimum of 6” (152.4 mm) of clearance from the top and side of the salamander. Once the Salamander has been placed in position by consulting International Standards and regulations. You can choose put on the table or hang on the wall.
Page 5
Parts Breakdown Parts Breakdown Model CE-CN-1633-S Model CE-CN-1534-S 39582 39581 Item No. Description Position Item No. Description Position Item No. Description Position 77932 Body Fixed for PA10630S 44729 Grilling for PA10630S 77936 Back Front Plate for PA10630S 44742 Back Plate for PA10630S...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: ________________________________________________________________________________________ Merci d’avoir acheté...
Page 9
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the 39581 and is the answer not in the manual?
Questions and answers