Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rotozi P5
Summary of Contents for Rotozi P5
- Page 1 USER MANUAL...
- Page 2 User Manual Rotozi USER MANUAL BUCKET ROTATOR Rotozi The purpose of this manual is to ensure the product’s proper functioning, durability and safety. It is vital that you understand the safety and maintenance instructions given in this manual.
-
Page 3: Table Of Contents
THE DEVICE ........................... 6 DIMENSIONS ........................6 BUCKET ROTATOR INSTALLATION (check the following) ............7 MOUNTING THE CONNECTOR ON THE ROTOZI ROTATOR..........8 ATTACHING A TOOL TO THE ROTATOR (buckets, forklift spikes, etc.) ........9 3.4.1 Manual locking ......................9 3.4.2... -
Page 4: Introduction
Rotozi 1 INTRODUCTION This manual concerns the use and maintenance of the Rotozi bucket rotator. What is stated here applies to all bucket rotators regardless of the excavator make and model. The rotator user must be familiar with the safety instructions of the excavator and various accessories. -
Page 5: Warnings And Observations
User Manual Rotozi 2 WARNINGS AND OBSERVATIONS Do not use the rotator unless you are properly familiar with its use. Ensure that the rotator is properly mounted on the truck before use. Using a defective rotator is forbidden! A bucket rotator is not intended for rocky ground but for levelling and moving soil. -
Page 6: Technical Details That Must Be Accounted For When Starting To Use The Device
User Manual Rotozi 3 TECHNICAL DETAILS THAT MUST BE ACCOUNTED FOR WHEN STARTING TO USE THE DEVICE DIMENSIONS... -
Page 7: Bucket Rotator Installation (Check The Following)
User Manual Rotozi BUCKET ROTATOR INSTALLATION (check the following) Check before installing the device: Superficial condition of the device Condition of hydraulic hoses The truck’s tipping load limits, you may have to select a smaller bucket. Correct hydraulic pressure from the machine Note! The truck and bucket rotator must placed on a flat and firm surface. -
Page 8: Mounting The Connector On The Rotozi Rotator
Rotozi Mounting the connector on the rotator. MOUNTING THE CONNECTOR ON THE ROTOZI ROTATOR. 1. Lower the bracket parts onto the corresponding surfaces of the bucket rotator 2. Turn the lock cylinder switch of the brackets to the ON position. You will hear a sound indicating that the lock cylinder is open. -
Page 9: Attaching A Tool To The Rotator (Buckets, Forklift Spikes, Etc.)
User Manual Rotozi ATTACHING A TOOL TO THE ROTATOR (buckets, forklift spikes, etc.) 3.4.1 Manual locking 1. Lower the bucket rotator brackets onto the corresponding surfaces of the tool 2. Turn the lock screw of the connector to the OPEN position 3. -
Page 10: Removing The Tool From The Rotator
User Manual Rotozi REMOVING THE TOOL FROM THE ROTATOR 3.5.1 Manual locking 1. Lower the tool onto a flat surface. 2. Open the lock screw and remove by turning the connector to the OPEN position 3. Lift the connector carefully off the machine as shown in the picture. -
Page 11: Removing The Bucket Rotator Connector
User Manual Rotozi REMOVING THE BUCKET ROTATOR CONNECTOR 1. Lower the bucket rotator on a level surface. 2. Release the bracket’s lock cylinder on the device by pressing the lock cylinder switch to the ON position. (If the device has mechanical locking, follow the manufacturer’s instructions). -
Page 12: Installation Of Hydraulics On The Rotator
User Manual Rotozi 3.7 INSTALLATION OF HYDRAULICS ON THE ROTATOR Connect the hoses to the hydraulics and the rotator motor. Connection of hoses to boom hydraulics. Hydraulics values of the machine: The operating pressure of the rotator hydraulics is max. 195 bar. -
Page 13: Installing The Hydraulic Locking
User Manual Rotozi INSTALLING THE HYDRAULIC LOCKING If the Rotozi bucket rotator is equipped with hydraulic tool locking, the locking must be controlled in one of the ways below. Alternative A, Simultaneous use of two buttons: Two buttons must be pressed at the same time to remove a tool It must not be possible to press the buttons with one hand Both buttons must be self-returning. - Page 14 User Manual Rotozi In the picture: 2-way valve with 6/2 electron solenoid. The machine must have a button/buttons on the handles The machine must have double-acting hydraulics The bucket rotator is connected to the excavator’s additional hydraulics. For example, either directly to the loader bucket hydraulics, or through a 6/2 valve.
-
Page 15: Central Lubrication
User Manual Rotozi CENTRAL LUBRICATION If your bucket rotator has been supplied with manual central lubrication, all lubrication will be done by means of a progressive distributor nipple. By replacing the nipple with a connector, you can connect the rotator lubrication to your machine’s central lubrication system. -
Page 16: Using The Rotator With The Machine
User Manual Rotozi 4 USING THE ROTATOR WITH THE MACHINE Usage depends on the control system used on the machine. The machine owner or a technician authorised by the owner must make any control adjustments for the rotator. We will not be held responsible for control adjustments and hydraulics installations on the machine. -
Page 17: Warnings Around The Area Where The Machine Is Used
User Manual Rotozi WARNINGS AROUND THE AREA WHERE THE MACHINE IS USED • Do not go under the machine under any circumstances • Work must not be done around the machine when it is excavating. Checklist before using the machine’s rotator •... -
Page 18: Warranty
User Manual Rotozi 5 WARRANTY Rotozi grants a 12-month warranty for the product, covering any raw material and material defects. We are not responsible for any damage caused by: - Improper or careless use - Misuse - Natural wear and tear... - Page 19 User Manual Rotozi Manufacturer: Rotozi Oy Kukonkorventie 5, door 3 33880 Lempäälä Business ID: 2789878-9 Tel. +358 20 734 7280 info@rotozi.fi www.rotozi.fi...
Need help?
Do you have a question about the P5 and is the answer not in the manual?
Questions and answers