Table of Contents
Related Manuals for HARGASSNER Classic 14
Summarization of Contents
Chapter I: Technical Data
1 Dimensions
Provides physical dimensions (width, depth, height, weight) of the boiler.
2 Intended purpose
Specifies the boiler's sole purpose for heating water and authorized fuels.
3 Fuel quality
Details the required quality standards for wood pellets (class A1).
4 Execution of the boiler room
Outlines requirements for the boiler room installation space.
5 Design of the fuel storage room
Provides guidelines for designing the pellet fuel storage room.
6 Execution of heating circuits
Specifies requirements for designing heating circuits for optimal boiler operation.
7 Flue pipe - chimney connections
Details flue gas parameters, draft, and connection diameter for chimney systems.
8 Electrical supply
Specifies electrical requirements including voltage, frequency, and fuse rating.
Chapter II: Safety regulations
1 General safety advices
Covers obligation to instruct, unauthorized individuals, and carbon monoxide risks.
1.1 Obligation to instruct, external personnel, children
Highlights responsibilities for instructing users and preventing unauthorized access.
1.2 Special measures prior commissioning through the operator
Details necessary checks and licensing requirements before initial operation.
2 Remaining risks
Addresses residual risks like burns from hot surfaces, scalds, and dust explosions.
3 Measures in case of danger
Provides immediate actions for fire, power loss, leaks, and auger blockages.
Chapter III: Operation
1 Overview of components
Identifies and describes the various components of the boiler system.
2 Prior to commissioning
Details safety checks and requirements before the initial start-up.
3 Control panel
Introduces the control panel and its safety warnings.
4 Operating modes
Explains the different operating modes of the boiler (Auto, HWT, Off, Manual, Sweep).
5 Boiler's status indicators
Describes various boiler statuses detected by sensors and control unit.
6 Info - menu
Explains how to access and navigate the information menu.
7 Manual Operation Procedures
Guides on performing manual checks and operations for boiler functions.
8 Settings menu
Explains how to access the settings menu for customer, installer, and service.
9 Customer settings
Allows users to adjust settings like day/week clocks and setpoint temperatures.
10 Installer settings
10.1 Parametrising the heat circuits and HWT
Details how to parameterize heat circuits and HWT, listing parameter ranges.
10.2 Parameter A - heat circuits
Defines parameters for heat circuits, including flow temperatures and steepness.
10.3 Parameter B - HWT
Details parameters for configuring the domestic hot water (HWT) system.
10.4 Parameter C - Accumulator
Defines parameters for accumulator control and integration.
10.5 Parameter D - General
Covers general operating parameters for the pellet boiler.
10.6 Parameter E - languages
Allows selection of the user interface language.
10.7 Parameter G - differential control
Configures differential control functions for heat circuits and external heat.
11 Optional remote controls
11.1 Digital remote control FR40
Details the functions and operation of the FR40 digital remote control.
11.2 Digital remote control FR35
Explains the features and operation of the FR35 digital remote control.
11.3 Analogue remote control FR25
Describes the analogue remote control FR25 for specific heat circuits.
Chapter IV: Cleaning, Maintenance
Safety Precautions for Cleaning & Maintenance
Addresses risks like moving parts, electric shock, and fire during maintenance.
Maintenance Contract & Intervals
Details the maintenance contract, service intervals, and cleaning requirements.
Detailed Cleaning Procedures
Provides step-by-step instructions for cleaning boiler components.
Disposal Information
Guidance on proper disposal of ash, parts, and boiler components.
Chapter V: Troubleshooting
1 Error display
Explains how errors are displayed on the touch screen and the meaning of symbols.
2 Retrieving the error list
Describes how to access and view the list of recorded errors.
3 Acknowledging and rectifying an error
Guides on how to acknowledge and rectify errors after they occur.
Chapter VI: Appendix
1 Copyright notice
States the copyright and usage restrictions for the manual.
1.1 Special measures prior commissioning through the operator
Reiterates operator responsibilities for safe operation and hydraulic work.
1.2 Liability
Outlines the manufacturer's liability and warranty conditions.
Need help?
Do you have a question about the Classic 14 and is the answer not in the manual?
Questions and answers