Advertisement
Quick Links
Planeur semi-maquette
Semi-scale sailplane
Caractéristiques techniques/Technical data:
Echelle/scale:
1:5
Envergure/wingspan:
2,74m
Longueur/length:
1,47m
Poids/TO weight:
2,7/2,8kg
Surface/wing area:
45,6dm
Profil/airfoil:
RG15
Equipements recommandés/Recommended equipments:
Moteur/motor:
XPower XC3522/5LS
Contrôleur/ESC:
XPower XREG60
Accu/battery pack:
XPower Xtreme11,1V 2600mAh (3S)
Hélice/prop:
XPower FOLDING PROP 14x8" #099FB1408
Porte pales/prop hub:
XPower 20mm +5° #099H200805
Radio/RC set:
Récepteur/receiver: XPower RP8D1
Ailerons:
Profondeur/Elevator: 1 servo HITEC HS-325HB
Direction/Rudder:
AF/AB:
ATTENTION !
Ce modèle à construire n'est pas un jouet, il
ne convient pas aux enfants de moins de 14 ans.
Une mauvaise utilisation de ce matériel peut
provoquer des dommages matériels ou corporels.
Vous êtes pleinement responsable
lorsque vous utilisez votre modèle.
Volez à une distance de sécurité des zones
habitées.
Soyez sûr que personne n'émet sur la même
fréquence que vous.
2
2 servos TOPMODEL SS1816
1 servo TOPMODEL MS2414
AF ELECTRIQUE/ELECTRIC SPOILER 250mm #099ELAF25
CAUTION !
This model construction kit is not a toy and is not
suitable for children under the age of 14.
Incorrect use of this material could cause material
damage ou personal injury.
You are fully responsible for your actions when you
use this model.
Fly at a safe distance from occupied zones.
Be sure that no one else is using the same
frequency as you.
Distribué par / Distributed by:
Distribué par / Distributed by:
p /
y
TOPMODEL
TOPMODEL
L
S.A.S.
S.A.S.
Le jardin d'entreprises de SOLOGNE - F-41300 SELLES SAINT DENIS - www.topmodel.fr
©TOPMODEL 2010
Order N° 066GFOX
Advertisement
Related Manuals for Ecotop FOX
Summarization of Contents
Model Introduction and Specifications
Technical Data and Recommended Equipment
Provides scale, dimensions, weight, airfoil, and lists recommended components.
Important Operational Precautions
Essential safety advice for model operation, including age limits and safe flying.
Kit Assembly Requirements
Required Adhesives, Tools, and Components
Lists required adhesives, tools, motor, radio, and battery components for assembly.
Covering Maintenance
Step-by-step instructions for re-shrinking and smoothing the model's covering.
Warranty and Kit Preparation (English)
Warranty Policy Information
Details on the warranty policy, including notification period and responsibilities.
Required Adhesives, Tools, and Components (English)
Lists required adhesives, tools, motor, radio, and battery components for assembly.
Re-shrinking the Covering
Instructions on how to re-shrink and maintain the model's covering.
Kit Contents Diagram
Visual Identification of Kit Parts
Diagram illustrating all the parts included in the model construction kit.
Kit Contents List
Detailed Parts Inventory
Comprehensive list of all parts with their designations, materials, and quantities.
Aileron Linkage Installation
Installing Aileron Control Horns and Servos
Detailed steps for fitting aileron control horns, servo mounts, and linkages.
Aileron Linkage Finalization
Connecting Aileron Pushrods and Servos
Steps for connecting pushrods, setting servo neutral, and installing servo covers.
Airbrake Installation
Installing Electric Airbrakes
Instructions for cutting covering, attaching lead wires, and fitting airbrakes in the wing.
Airbrake System Setup
Connecting and Securing Airbrakes
Steps for connecting airbrakes to a servo tester, securing them, and fitting covers.
Wing Tip Wheels and Landing Gear Preparation
Installing Wing Tip Wheels
Instructions for attaching wing tip wheels to the wing.
Preparing Main Landing Gear Components
Gathering and preparing parts for the main landing gear installation.
Main Landing Gear Installation
Mounting Main Gear in Fuselage
Steps for assembling and securing the main landing gear to the fuselage.
Tailwheel Installation
Installing the Tailwheel Assembly
Instructions for fitting the tailwheel through the fuselage formers and securing the axle.
Motor Installation Part 1
Mounting the Motor and Motor Mount
Steps for bonding motor mount pieces, installing the motor, and marking reference lines.
Motor Installation Part 2
Securing Motor Mount and Propeller
Steps for fixing the motor mount, reinforcing the bond, and assembling the propeller.
Wings Installation
Attaching Wings and Connectors
Instructions for inserting wing dowels, hooks, and assembling servo/airbrake connectors.
Rudder Installation Part 1
Preparing Rudder and Control Horn
Steps for enlarging holes, gluing hinges, and marking rudder control horn position.
Rudder Installation Part 2
Connecting Rudder Linkage and Servo
Steps for drilling, gluing horns, building servo mounts, and connecting rudder linkage.
Rudder Installation Part 3
Finalizing Rudder Assembly and Servo Mount
Steps for gluing rudder hinges, fixing the servo mount, and connecting extensions.
Horizontal Stabilizer Installation Part 1
Preparing Elevator Control Horn and Linkage
Steps for marking the stabilizer, attaching the elevator control horn, and building the linkage.
Horizontal Stabilizer Installation Part 2
Mounting Stabilizer and Connecting Elevator Servo
Steps for attaching the stabilizer, mounting the elevator servo, and connecting the linkage.
Cockpit Installation Part 1
Installing Canopy Latch and Knock Pins
Steps for installing the canopy latch, its mount, and the forward knock pin.
Cockpit Installation Part 2
Fitting the Canopy and Latch System
Steps for bonding the stand, making canopy holes, and fitting the canopy.
Cockpit Finishing Part 1
Preparing and Assembling Cockpit Parts
Instructions for cutting, assembling, and completing instrument panels for the cockpit.
Cockpit Finishing Part 2
Installing Cockpit Interior Components
Steps for assembling and securing instrument consoles, panels, seats, and headrests.
Cockpit Finishing and Electronics Installation
Installing Electronics and Final Cockpit Fit
Instructions for painting interior, fitting cockpit, soldering connectors, and installing receiver/ESC/battery.
Center of Gravity and Control Throws
Setting CG and Control Surface Movements
Guidance on balancing the model and setting control surface throws for optimal performance.
Mixing Setup
Configuration for elevator up movement when airbrakes are extended.
Pre-flight Checks
General Checks and Adjustments
Covers checking CG, control throws, motor, battery, fixations, radio range, and other pre-flight tasks.
Need help?
Do you have a question about the FOX and is the answer not in the manual?
Questions and answers